CQUniversity Unit Profile

In Progress

Please note that this Unit Profile is still in progress. The content below is subject to change.
ENEC28001 Geotechnical Engineering Design
Geotechnical Engineering Design
Save or Print as PDF
All details in this unit profile for ENEC28001 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

Geotechnical Engineering Design will enable you to develop and apply your knowledge of Australian Standards and/or relevant guidelines to analyse and design advanced geotechnical engineering structures involving a broad range of investigations. You will learn to use computer software to analyse and design the geotechnical components; conduct site investigations; test and characterise geotechnical materials, design foundations, and earth retaining structures; and make assessments of geotechnical stability. Considering stakeholders and sustainability requirements, you will formulate, plan, manage, and complete projects individually and in teams in an ethical and professional manner by. You will also document and communicate engineering information using appropriate language for a professional engineer.

Details

Career Level: Postgraduate
Unit Level: Level 8
Credit Points: 12
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.25

Pre-requisites or Co-requisites

There are no requisites for this unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 2 - 2024

Melbourne
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Residential Schools

This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.

Website

This unit has a website, within the Moodle system, which is available two weeks before the start of term. It is important that you visit your Moodle site throughout the term. Please visit Moodle for more information.

Class and Assessment Overview

Recommended Student Time Commitment

Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Class Timetable

Regional Campuses
Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Metropolitan Campuses
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

CQUniversity Policies

All University policies are available on the CQUniversity Policy site.

You may wish to view these policies:


This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Identify and apply site investigation and geotechnical testing techniques to characterise sites and geotechnical materials based on Australian Standards
  2. Evaluate group piles, pad foundations and earth retaining structures and assess stability of slopes
  3. Plan, manage and complete projects individually or in teams in an ethical and professional manner considering stakeholder requirements and principals of sustainable development
  4. Use appropriate software to analyse geotechnical components
  5. Demonstrate a professional level of communication and leadership.

The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:
Introductory
2.3 Application of systematic engineering synthesis and design processes. (LO: 2N )
Intermediate
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 2I 3N )
3.3 Creative, innovative and pro-active demeanour. (LO: 2N 4I )
3.5 Orderly management of self, and professional conduct. (LO:  3I 4I )
Advanced
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 2A 1N 4A )
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 2I 4A )
1.4 Discernment of knowledge development and research directions within the engineering discipline. (LO: 3A )
2.1 Application of established engineering methods to complex engineering problem solving. (LO: 2A 1N 4I )
2.2 Fluent application of engineering techniques, tools and resources. (LO: 2I 1I 4A )
3.2 Effective oral and written communication in professional and lay domains. (LO: 3A 4I 5A )
3.4 Professional use and management of information. (LO: 2I 3A )
3.6 Effective team membership and team leadership. (LO: 2A 5I )

Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate and A - Advanced.
Refer to the Engineering Postgraduate Units Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Written Assessment - 30%
2 - Written Assessment - 30%
3 - In-class Test(s) - 40%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Knowledge
2 - Communication
3 - Cognitive, technical and creative skills
4 - Research
5 - Self-management
6 - Ethical and Professional Responsibility
7 - Leadership
8 - Aboriginal and Torres Strait Islander Cultures
Textbooks and Resources

Information for Textbooks and Resources has not been released yet.

This information will be available on Monday 17 June 2024
Academic Integrity Statement

Information for Academic Integrity Statement has not been released yet.

This unit profile has not yet been finalised.