Overview
On completion of this unit students should be able to explain the characteristics, strengths and weaknesses of key theoretical accident analysis, simulation and reconstruction models. These students should also be able to apply the models to complex accident scenarios.
Details
Pre-requisites or Co-requisites
AINV12002 Accident Phenomenology and 48 units of credit
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2020
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Have Your Say
Plenty of opportunity was provided for students to ask questions and expand their understanding of the material.
Maintain the same opportunities through the Q&A Forum, Zoom tutorials and informal communication between students and lecturers.
Feedback from Have Your Say
Learning how to create an event tree was the best aspect of the unit.
Maintain the step-by-step structured approach to building an event tree using practical examples from accident case studies.
Feedback from Have your Say
The task description of the assessment tasks required further explanatory instructions.
All assessment tasks are to be reviewed prior to the next offering of this unit.
- Evaluate the benefits, features and application of accident analysis models.
- Reconstruct accident causation sequences using contemporary methods of reconstruction and simulation.
- Employ effective communication strategies appropriate to accident analysis.
- Demonstrate reflective skills appropriate to the development at an advanced level.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Group Discussion - 10% | ||||
2 - Written Assessment - 50% | ||||
3 - Written Assessment - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Communication | ||||
2 - Problem Solving | ||||
3 - Critical Thinking | ||||
4 - Information Literacy | ||||
5 - Team Work | ||||
6 - Information Technology Competence | ||||
7 - Cross Cultural Competence | ||||
8 - Ethical practice | ||||
9 - Social Innovation | ||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Group Discussion - 10% | ||||||||||
2 - Written Assessment - 50% | ||||||||||
3 - Written Assessment - 40% |
Textbooks
There are no required textbooks.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
s.munn@cqu.edu.au
Module/Topic
Lecture: Introduction and unit overview
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
No tutorial
Module/Topic
Lecture: Models and tools
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Thinking about your case study for assessment three
Module/Topic
Lecture: Understanding the importance of timelines and introduction to event trees
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Developing a timeline
Module/Topic
Lecture: Event tree layout
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Practicing event tree layouts
Module/Topic
Lecture: Further developing an event tree
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Further practice on event tree layouts
Investigating the link between theoretical models and accident analysis tools Due: Week 5 Monday (6 Apr 2020) 10:00 am AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Lecture: Reviewing accident simulation tools
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Discussing the strengths and weaknesses of simulation tools
Module/Topic
Lecture: Testing event tree logic
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Types of logic and reasoning (deductive, inductive and abductive)
Group discussion - the value of accident simulations Due: Week 7 Tuesday (28 Apr 2020) 11:45 pm AEST
Module/Topic
Lecture: Informing an event tree using analysis - using accident analysis tools
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Discussing the lenses that inform our event trees
Module/Topic
Lecture: Creating a narrative of the event tree using supporting analysis
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Improving your causation narrative, appraising your evidence and reviewing your reasoning
Module/Topic
Lecture: Other analysis tools - MORT and Fault Tree Analysis (FTA)
Chapter
Any applicable readings will be available in Moodle
Events and Submissions/Topic
Tutorial: Discussing MORT and FTA and their informative relationship to an event tree
Module/Topic
Independent study
Chapter
Events and Submissions/Topic
Tutorial: Preparing your report and event tree for assessment three
Module/Topic
Independent study
Chapter
Events and Submissions/Topic
Tutorial: Preparing your report and event tree for assessment three
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
This assignment draws on your learnings from AINV12002 Accident Phenomenology. Each accident analysis tool is derived from one of the theoretical perspectives (models) of how accidents occur. This assignment explores the link between the theoretical models and accident analysis tools to help us understand how any limitation of the lens of the theoretical model might also translate as a limitation to the usefulness of the accident analysis tool.
You are required to:
1. Choose three accident analysis tools highlighted on the list provided in Moodle.
2. For each tool, explain what theoretical model/s might underpin it and why you think this is the case.
3. For each tool, explain any limitations you might anticipate in the accident analysis tool given the theoretical model/s that underpin it.
4. For each tool, explain the strengths and weaknesses that you are able to anticipate using the structure of the tool as the basis of your discussion.
5. Reflect on your learning about the link between the theoretical models and accident analysis tools and how that learning will inform your use of accident analysis tools.
Your assessment should be around 3000 words, comprising approximately 750 - 1000 words per tool and 300-350 for reflection, and be supported by relevant citations (minimum of 12) from the literature.
Your paper MUST be written in the third person.
Week 5 Monday (6 Apr 2020) 10:00 am AEST
Two weeks following submission
The following assessment criteria will apply:
1. (20%) For each tool, there is an explaination of what theoretical model/s might underpin it and why this is the case.
2. (20%) For each tool, limitations anticipated in the accident analysis tool given the theoretical model/s that underpin it, are explained.
3. (20%) For each tool, the strengths and weaknesses able to be anticipated using the structure of the tool, are explained.
4. (20%) Reflection on the learnings about the link between the theoretical models and accident analysis tools and how that learning informs the use of accident analysis tools, has been explained.
5. (10%) Paragraph and sentence construction, spelling, language and grammar use in the assignment
6. (10%) Referencing - includes the provision of a referencing list and the application of the Harvard style for referencing information, data, tables or images sourced for the assignment
- Reconstruct accident causation sequences using contemporary methods of reconstruction and simulation.
- Employ effective communication strategies appropriate to accident analysis.
- Demonstrate reflective skills appropriate to the development at an advanced level.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
2 Group Discussion
This assessment task has two parts.
Part A
Utilising a web-based search, you are required to find two accident simulation or reconstruction videos. You will then prepare a mindmap of the the two simulations you have chosen, commenting on the tools used to create the simulation, the limitations and/or strengths and weaknesses of the simulation, and the overall usefulness of the simulation with respect to the credibility and knowledge base of the author of the simulation.
Your choice of reconstructions must use different simulation software. For example, you cannot choose two reconstructions that both use PC Crash.
Your post must include the video links of the simulations or reconstructions that you have chosen.
To post your response simply respond to the "Post your response here" located in Group Discussion under the Assessment Block.
You will be able to see what your peers have posted only after you have posted your own submission.
Part B
Comment on the mindmaps of two of your peers with constructive suggestions on how their mindmaps might be improved. Your comments should be limited to no more than 500 words.
Your mindmap and comments to peers response will be graded online and rated out of five in accordance with the assessment criteria.
Week 7 Tuesday (28 Apr 2020) 11:45 pm AEST
Two weeks following closing of the forum
The following assessment criteria will apply:
1. Tools used to create the simulations have been identified
2. Limitations and/or strengths and weaknesses have been identified
3. Usefulness of the simulation based on author credibility and knowledge base has been included
4. Video links included
5. Constructive comments to peers have been posted
- Employ effective communication strategies appropriate to accident analysis.
- Demonstrate reflective skills appropriate to the development at an advanced level.
- Communication
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
3 Written Assessment
The aim of this assessment task is for students to develop an evidence-informed timeline and an event tree with appropriate sub-trees that inform understanding of the sequence of events, causation sequences and outcomes of an accident. The resultant set of logic diagrams are then to be incorporated in a report which describes the event, the context of the event, and a causation narrative of the analysis.
Assessment Task
In this assessment task you must analyse an accident from a list of case studies provided in Moodle, or other case study that has been approved by the unit coordinator, and prepare:
An evidence-informed Timeline to explain the sequence of events that led to the accident
An Event Tree to explain all the causal factors sequences and outcomes of the accident
A report, incorporating your completed diagrams, describing your event tree analysis and findings.
Your event tree should involve at least six (6) lines of enquiry (People, Environment, Equipment, Procedures, Organisation, and one other line of enquiry).
There is no minimum or maximum word limit given the inclusion of a timeline and event tree, however narratives should be concise. You must include relevant citations from the literature as appropriate.
Your report MUST be writtten in the third person.
Review/Exam Week Monday (8 June 2020) 10:00 am AEST
Two weeks following submission
1. (60%) Technical Content—includes the accuracy, relevance and application of key concepts, analysis, and logical argument.
2. (20%) Paragraph and sentence construction, spelling, language and grammar used in the report.
3. (10%) Report format
4. (10%) Referencing—includes the provision of a reference list and the application of the Harvard style for referencing information, data, tables or images sourced for the assignment or report
- Evaluate the benefits, features and application of accident analysis models.
- Employ effective communication strategies appropriate to accident analysis.
- Demonstrate reflective skills appropriate to the development at an advanced level.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
![](/img/academic_integrity.png)