Overview
This unit provides students with the opportunity to critically analyse, challenge and apply the principles, theories, methods, models and paradigms which inform their selected area of accident domain specialisation.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2019
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Coordinator observations
Amalgamating the accident domain investigation and safety specialisation streams would combine students into fewer units while providing the same learning outcomes.
This unit has been removed from the Master of Advanced Safety Science Practice and Master of Safety Science (Major), and prospective students redirected to the SAFE counterpart (SAFE20014) from term 1 2020 in order to combine students in the accident domain investigation and safety specialisation streams.
- Critically analyse contemporary principles, theories, paradigms, models and methods relating to the selected area of accident domain specialisation.
- Evaluate the effectiveness of current approaches in the selected area of accident domain specialisation.
- Develop strategies and approaches that challenge or extend existing models and methods in the selected area of accident domain speclialisation.
- Justify changes in perspective and practice in the selected area of accident domain specialisation through evidence informed reasoning and critical reflection.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Presentation and Written Assessment - 20% | ||||
| 2 - Portfolio - 80% | ||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Knowledge | ||||
| 2 - Communication | ||||
| 3 - Cognitive, technical and creative skills | ||||
| 4 - Research | ||||
| 5 - Self-management | ||||
| 6 - Ethical and Professional Responsibility | ||||
| 7 - Leadership | ||||
| 8 - First Nations Knowledges | ||||
| 9 - Aboriginal and Torres Strait Islander Cultures | ||||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| 1 - Presentation and Written Assessment - 20% | |||||||||
| 2 - Portfolio - 80% | |||||||||
Textbooks
There are no required textbooks.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
s.dell@cqu.edu.au
Week 1
Begin Date: 15 Jul 2019Module/Topic
Meet & greet Zoom session to introduce the unit and expectations
Chapter
Events and Submissions/Topic
Week 2
Begin Date: 22 Jul 2019Module/Topic
Self-directed study
Study schedule based on learning contract to be negotiated in week 2
Chapter
Events and Submissions/Topic
Schedule a half hour meeting with learning mentor to negotiate a learning contract and establish a schedule for future student/learning mentor consultations.
Week 3
Begin Date: 29 Jul 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Learning Contract due Week 3 Friday
Progress Report 1 due Week 3 Friday
Week 4
Begin Date: 05 Aug 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Week 5
Begin Date: 12 Aug 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Progress Report 2 due Week 5 Friday
Vacation Week
Begin Date: 19 Aug 2019Module/Topic
Chapter
Events and Submissions/Topic
Week 6
Begin Date: 26 Aug 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Week 7
Begin Date: 02 Sep 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Progress Report 3 due Week 7 Friday
Week 8
Begin Date: 09 Sep 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Week 9
Begin Date: 16 Sep 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Progress Report 4 due Week 9 Friday
Week 10
Begin Date: 23 Sep 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Week 11
Begin Date: 30 Sep 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Progress Report 5 due Week 11 Friday
Week 12
Begin Date: 07 Oct 2019Module/Topic
Self-directed study and meetings with learning mentors, as per agreed learning contracts
Chapter
Events and Submissions/Topic
Review/Exam Week
Begin Date: 14 Oct 2019Module/Topic
Chapter
Events and Submissions/Topic
Exam Week
Begin Date: 21 Oct 2019Module/Topic
Chapter
Events and Submissions/Topic
1 Presentation and Written Assessment
Part A - Learning Contract (5%)
Negotiate with your Learning Mentor and create a learning contract which establishes a schedule for your consultations throughout the term. This learning contract must be uploaded to Moodle by the end of Week 3.
Part B - Progress Reports (15%)
For this assessment task, you will need to prepare fortnightly written progress reports, detailing:
- the work that you have been completing since your previous progress report, including any 'aha' moments
- the materials that you have been exploring
- any issues that have been encountered in your project (and their resolution)
You will be expected to submit a minimum of five (5) progress reports over the course of the term.
You will negotiate with your Learning Mentor in Week 2 to create your Learning Contract, which must be uploaded to Moodle by the end of Week 3. You will also prepare fortnightly progress reports which will also be uploaded to Moodle.
Feedback will be provided in Moodle and during scheduled meetings with the Unit Coordinator and Learning Mentors.
Part A – Learning Contract
Learning Contract to be negotiated with Learning Mentor, which must include planned schedule of meetings for the term and agreed expectations regarding submission drafts and feedback (5 marks)
Part B – Progress Reports
5 brief written Progress Reports are to be uploaded in total. Progress Reports are to be completed and uploaded fortnightly, detailing:
- the work that you have been completing since your previous progress report, including any 'aha' moments (1 mark)
- the materials that you have been exploring (1 mark)
- any issues that have been encountered in your project (and their resolution) (1 mark).
Submissions need only be approximately 250 words in length, and may include dot point lists.
(15 marks; 3 marks each)
- Critically analyse contemporary principles, theories, paradigms, models and methods relating to the selected area of accident domain specialisation.
- Evaluate the effectiveness of current approaches in the selected area of accident domain specialisation.
- Develop strategies and approaches that challenge or extend existing models and methods in the selected area of accident domain speclialisation.
- Justify changes in perspective and practice in the selected area of accident domain specialisation through evidence informed reasoning and critical reflection.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
2 Portfolio
Part A - Annotated Bibliography (40%)
Choose a minimum of 10 authoritative sources that relate to your chosen accident domain. These could include:
- peer-reviewed journal articles
- book chapters
- 'grey literature' (government reports, industry reports, etc.).
Prepare an annotated bibliography in which you critically analyse contemporary principles, theories, paradigms, models and methods relating to your specific project. Submissions that include a variety of sources are more likely to be successful.
As a guide, submissions of approximately 3000-3500 words are more likely to be successful.
Part B - Position Paper (40%)
Write a position paper (2000-2500 words) in which you evaluate the effectiveness of current approaches in your chosen accident domain and develop strategies and approaches that challenge or extend existing models and methods in use, as well as identify potential areas for future research.
Week 12 Friday (11 Oct 2019) 11:59 pm AEST
Feedback will be provided to students two academic weeks following the due date.
Part A – Annotated Bibliography
- Submission explores a minimum of 10 relevant reputable and authoritative sources (Non-graded requirement)
- An introduction is provided which contextualises the annotated bibliography and justifies the references chosen (5 marks)
- Annotations succinctly summarise the contents of each reference (10 marks)
- Annotations clearly explain the origin and relevance of each reference (10 marks)
- Each reference is thoroughly analysed and their importance to the topic emphasised (10 marks)
- Submission is formatted appropriately for an annotated bibliography (1 mark)
- Submission evidences high level academic writing skills (2 marks)
- All sources are referenced properly in line with the current version of Harvard Referencing Style (2 marks)
Part B – Position Paper
- Introduction gives a clear background of the topic and sets expectations for the rest of the paper (5 marks)
- Topic is clearly contextualised within the relevant domain (2 marks)
- Current domain-specific approaches are identified and explained, including any shortcomings or limitations (10 marks)
- Submission argues for an alternative strategy with regard to at least one specific area of investigation practice within the domain (10 marks)
- Argument is well-constructed and flows logically (5 marks)
- Argument is well-supported by reputable and authoritative sources (3 marks)
- Submission is formatted appropriately for a position paper (1 mark)
- Submission evidences high level academic writing skills (2 marks)
- All sources are referenced properly in line with the current version of Harvard Referencing Style (2 marks)
- Critically analyse contemporary principles, theories, paradigms, models and methods relating to the selected area of accident domain specialisation.
- Evaluate the effectiveness of current approaches in the selected area of accident domain specialisation.
- Develop strategies and approaches that challenge or extend existing models and methods in the selected area of accident domain speclialisation.
- Justify changes in perspective and practice in the selected area of accident domain specialisation through evidence informed reasoning and critical reflection.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
