CQUniversity Unit Profile
AVAT11002 Basic Aeronautical Knowledge
Basic Aeronautical Knowledge
All details in this unit profile for AVAT11002 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

This unit will provide you with basic aeronautical knowledge of small general aviation aircraft. You will calculate basic take-off and landing performance and weight and balance information. Other factors that affect flying, such as local weather, will be examined. You will develop knowledge of aerodynamics and aircraft power plants and systems. In this unit you will cover the aeronautical knowledge requirements of the Civil Aviation Safety Authority Syllabus applicable to the Recreational Pilot Licence. This will allow you to sit the Recreational Pilot Licence (Aeroplane) Examination which is a prerequisite for attempting the flight test for the Recreational Pilot Licence.

Details

Career Level: Undergraduate
Unit Level: Level 1
Credit Points: 12
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.25

Pre-requisites or Co-requisites

There are no requisites for this unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 2 - 2019

Bundaberg
Cairns
Online

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Written Assessment
Weighting: 20%
2. Online Quiz(zes)
Weighting: 20%
3. Examination
Weighting: 60%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from Self/Students

Feedback

Slides too busy.

Recommendation

Reduce the number of points on a slide.

Feedback from Students/staff

Feedback

Tutorials to have actual CASA type questions.

Recommendation

Tutorials and quizzes to include CASA exam type questions.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Communicate basic aviation terminology
  2. Describe the basics of aircraft power plants and systems
  3. Explain the basic aerodynamic principles of flight
  4. Calculate basic take-off and landing performance information
  5. Calculate basic weight and balance information
  6. Examine local weather information
  7. Describe local flight rules and procedures.

N/A. No external accreditation of the course.

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment - 20%
2 - Online Quiz(zes) - 20%
3 - Examination - 60%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures

Alignment of Assessment Tasks to Graduate Attributes

Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment - 20%
2 - Online Quiz(zes) - 20%
3 - Examination - 60%
Textbooks and Resources

Textbooks

Supplementary

Basic Aeronautical Knowledge

Edition: 2013 (2013)
Authors: Robson, R
Aviation Theory Centre Pty Ltd
Brisbane Brisbane , Queensland , Australia
ISBN: 9781875537570
Binding: Paperback

Additional Textbook Information


IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
Referencing Style

All submissions for this unit must use the referencing style: Harvard (author-date)

For further information, see the Assessment Tasks.

Teaching Contacts
Mike Malouf Unit Coordinator
m.malouf@cqu.edu.au
Schedule
Week 1 Begin Date: 15 Jul 2019

Module/Topic

Aircraft and Terminology

Chapter

Aircraft and Terminology

Events and Submissions/Topic

Lecture and Tutorial

Quiz 1 Friday Open 6.00am to 8.30pm


Due: Week 1 Friday (19 July 2019) 8:00 pm AEST
Quizzes Due: Week 1 Wednesday (17 July 2019) 11:45 pm AEST
Week 2 Begin Date: 22 Jul 2019

Module/Topic

Radio Communications

Chapter

Radio Communications

Events and Submissions/Topic

Lecture and Tutorial

Quiz 2 Friday Open 6.00am to 8.30pm

Week 3 Begin Date: 29 Jul 2019

Module/Topic

Structure, Propulsion, Fuel systems

Chapter

Structure, Propulsion, Fuel systems

Events and Submissions/Topic

Lecture and Tutorial

Quiz 3 Friday Open 6.00am to 8.30pm

Week 4 Begin Date: 05 Aug 2019

Module/Topic

Electrical, Hydraulic systems and Instruments

Chapter

Electrical, Hydraulic systems and Instruments

Events and Submissions/Topic

Lecture and Tutorial

Quiz 4 Friday Open 6.00am to 8.30pm

Week 5 Begin Date: 12 Aug 2019

Module/Topic

Air Law

Chapter

Air Law

Events and Submissions/Topic

Lecture and Tutorial

Quiz 5 Friday Open 6.00am to 8.30pm

Vacation Week Begin Date: 19 Aug 2019

Module/Topic

Chapter

Events and Submissions/Topic

Week 6 Begin Date: 26 Aug 2019

Module/Topic

Aerodynamics- Basics

Chapter

Aerodynamics- Basics

Events and Submissions/Topic

Lecture and Tutorial

Quiz 6 Friday Open 6.00am to 8.30pm

Week 7 Begin Date: 02 Sep 2019

Module/Topic

Aerodynamics- Performance

Chapter

Aerodynamics- Performance

Events and Submissions/Topic

Lecture and Tutorial

Quiz 7 Friday Open 6.00am to 8.30pm

Week 8 Begin Date: 09 Sep 2019

Module/Topic

Human Factors

Chapter

Human Factors

Events and Submissions/Topic

Lecture and Tutorial

Quiz 8 Friday Open 6.00am to 8.30pm

Week 9 Begin Date: 16 Sep 2019

Module/Topic

Meteorology

Chapter

Meteorology

Events and Submissions/Topic

Lecture and Tutorial

Quiz 9 Friday Open 6.00am to 8.30pm

Week 10 Begin Date: 23 Sep 2019

Module/Topic

Loading     

Chapter

Loading

Events and Submissions/Topic

Lecture and Tutorial

Quiz 10 Friday Open 6.00am to 8.30pm

Week 11 Begin Date: 30 Sep 2019

Module/Topic

Take-off and Landing performance

Chapter

Take-off and Landing performance

Events and Submissions/Topic

Lecture and Tutorial

Week 12 Begin Date: 07 Oct 2019

Module/Topic

Navigation

Chapter

Navigation

Events and Submissions/Topic

Lecture and Tutorial

Assessment 2: Written assignment regarding the loading, weight and balance of an aircraft, and take-off and landing performance. Must be returned on-line by 20/10/19 (no later than 11.59pm)


Review/Exam Week Begin Date: 14 Oct 2019

Module/Topic

Chapter

Events and Submissions/Topic

Exam Week Begin Date: 21 Oct 2019

Module/Topic

Chapter

Events and Submissions/Topic

Term Specific Information

I am the Unit Coordinator and lecturer for this subject.

During this term please contact me, if and when you feel it is necessary. 

I hope you progress successfully in this unit.This unit lays the foundation for most of your aviation subjects so it's important that you really understand the principles. 

Best wishes with your study in this unit.

Mike Malouf

Assessment Tasks

1 Written Assessment

Assessment Title

Task Description

This entails 5 questions about the loading, weight and balance of an aircraft and its take off and landing performance


Assessment Due Date

Week 1 Friday (19 July 2019) 8:00 pm AEST

To be completed and submitted on the Friday following the lecture/tutorial from week 1-10. Late submissions will not acquire any mark


Return Date to Students

on-line


Weighting
20%

Assessment Criteria

The quizzes total 100 marks and represent of 40% of grade


Referencing Style

Submission
Online

Learning Outcomes Assessed
  • Describe the basics of aircraft power plants and systems
  • Examine local weather information
  • Describe local flight rules and procedures.


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking
  • Information Literacy
  • Ethical practice

2 Online Quiz(zes)

Assessment Title
Quizzes

Task Description

The assessment will comprise 10 weekly quizzes. Each quiz will consist of 10 questions and each question is worth 1 mark.


Number of Quizzes


Frequency of Quizzes


Assessment Due Date

Week 1 Wednesday (17 July 2019) 11:45 pm AEST

Quiz to be completed on-line on the date stipulated. The quiz will be open from 6.00am -9.00pm but once you start the quiz you have only 20 minutes to complete it


Return Date to Students

Week 1 Monday (15 July 2019)

At the end of each quiz you will be given your mark out of 10.


Weighting
20%

Assessment Criteria

It is imperative that you understand the concepts given in the lectures and tutorials. The quizzes provide a means of ensuring understanding is met each week. 


Referencing Style

Submission
Online

Submission Instructions
To start the quiz, go to the AVAT 11002 Moodle site and click on the relevant quiz (they are numbered 1-10). Each question is multi-choice and you're required to click on the best option.

Learning Outcomes Assessed
  • Communicate basic aviation terminology
  • Explain the basic aerodynamic principles of flight
  • Calculate basic take-off and landing performance information
  • Calculate basic weight and balance information
  • Examine local weather information


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking
  • Critical Thinking
  • Ethical practice

Examination

Outline
Complete an invigilated examination

Date
During the examination period at a CQUniversity examination centre

Weighting
60%

Length
120 minutes

Exam Conditions
Open Book

Materials
Dictionary - non-electronic, concise, direct translation only (dictionary must not contain any notes or comments).
Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?