Overview
This unit will introduce you to the procedures, principles and methods of construction used for residential buildings and other structures designated by the National Construction Code (NCC) as being within Building Class 1 or 10. Students who have successfully completed BLCN11033 should not enrol in this unit.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2023
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Unit Evaluation survey.
I believe that there needs to be more explanation for each assessment task. Considering this is an online subject I felt very confused and alone when I was reading the questions.
The unit lecturer will provide more direction with respect to assessment task requirements. It is noted that the lecturer provided live tutorial sessions, presenting an opportunity for students to engage directly and seek direction about assessment tasks.
- Describe the importance of the housing industry to a community and the prevailing regulations for Australian projects
- Explain the residential procurement process and the human roles required
- Describe the functions, materials and details of the major components along with the waste management strategies used and the regulatory inspections made when constructing a residential project
- Prepare drawings and build a model for a residential project
- Describe the temporary works, particularly scaffolding, formwork and falsework and plant selection processes used for residential construction.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Written Assessment - 30% | |||||
| 2 - Written Assessment - 30% | |||||
| 3 - Written Assessment - 30% | |||||
| 4 - Online Quiz(zes) - 10% | |||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Communication | |||||
| 2 - Problem Solving | |||||
| 3 - Critical Thinking | |||||
| 4 - Information Literacy | |||||
| 5 - Team Work | |||||
| 6 - Information Technology Competence | |||||
| 7 - Cross Cultural Competence | |||||
| 8 - Ethical practice | |||||
| 9 - Social Innovation | |||||
| 10 - Aboriginal and Torres Strait Islander Cultures | |||||
Textbooks
Building Construction Handbook
Edition: 12th (2020)
Authors: Roy Chudley & Roger Greeno
Routledge
Abingdon Abingdon , Oxon , UK
ISBN: 9780367135430
Binding: Paperback
Site Establishment, Formwork and Framing
Edition: 4th (2020)
Authors: Adrian Laws
Cengage Learning
South Melbourne South Melbourne , VIC , Australia
ISBN: 9780170422529
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Access to printer and scanner
- Computer headset (microphone speaker combo)
- Microsoft Office or equivalent software
- Web camera (webcam)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
p.lawrence1@cqu.edu.au
Module/Topic
1. Introduction to design and construction of domestic buildings
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
1. Introduction to design and construction of domestic buildings (continued)
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
2. The procurement process
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
3. Domestic building components
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
3. Domestic building components (continued)
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
No scheduled class
Chapter
Consider using this week to work on an assessment or take a wellness break.
Events and Submissions/Topic
Module/Topic
4. Temporary structures: scaffoldings, formwork, falsework
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
4. Temporary structures: scaffoldings, formwork, falsework (continued)
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
5. Waste minimization
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
6. Residential construction drawings
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
7. Construction plant
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
8. Inspection procedures
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
8. Inspection procedures (continued)
Chapter
Please refer to the Moodle site for specific text book readings and additional unit information.
Events and Submissions/Topic
Module/Topic
No class
Unit review and exam period begins
Chapter
Events and Submissions/Topic
Assessment 4 Due: Review/Exam Week Friday (13 Oct 2023) 11:45 pm AEST
Module/Topic
No exam for this unit
Chapter
Events and Submissions/Topic
1 Written Assessment
This assessment relates to learning outcomes 1 and 2. Assessment 1 will require research to answer questions exploring Australian residential regulations and procurement processes.
Week 5 Monday (7 Aug 2023) 11:45 pm AEST
It is recommended the Moodle submission remain in draft form until you have viewed the Turnitin report and made any necessary amendments before lodging by the due date and time.
Week 6 Monday (21 Aug 2023)
Students will be advised if a delay emerges.
Before or on the nominated due date, upload your work following the on-screen instructions. Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the work is your own and is compliant with the CQU Harvard Referencing Guide. You will find additional material for this assessment on the unit Moodle site.
The assessment will be assessed on the following criteria:
- Show clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use and reference correctly supporting information.
- Present original thoughts and opinions.
- Communicate using correct spelling, grammar and punctuation.
- Use graphs, illustrations and other graphics to visually support your submission.
- Explain the core knowledge associated with this unit and show appropriate application of this knowledge.
- Describe the importance of the housing industry to a community and the prevailing regulations for Australian projects
- Explain the residential procurement process and the human roles required
2 Written Assessment
This assessment relates to learning outcomes 3 and 5. Assessment 2 will require research to answer questions exploring detailed building processes within residential construction, including labour, plant and equipment used for nominated building elements.
Week 9 Monday (11 Sept 2023) 11:45 pm AEST
It is recommended the Moodle submission remain in draft form until you have viewed the Turnitin report and made any necessary amendments before lodging by the due date and time.
Week 11 Monday (25 Sept 2023)
Students will be advised if a delay emerges.
Before or on the nominated due date, upload your work following the on-screen instructions. Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the work is your own and is compliant with the CQU Harvard Referencing Guide. You will find additional material for this assessment on the unit Moodle site.
The assessment will be assessed on the following criteria:
- Show clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use and reference correctly supporting information.
- Present original thoughts and opinions.
- Communicate using correct spelling, grammar and punctuation.
- Use graphs, illustrations and other graphics to visually support your submission.
- Explain the core knowledge associated with this unit and show appropriate application of this knowledge.
- Describe the functions, materials and details of the major components along with the waste management strategies used and the regulatory inspections made when constructing a residential project
- Describe the temporary works, particularly scaffolding, formwork and falsework and plant selection processes used for residential construction.
3 Written Assessment
This assessment relates to learning outcomes 3 and 4. Assessment 3 will require research to answer questions exploring residential construction components and documentation via drawings and a built model.
Review/Exam Week Wednesday (11 Oct 2023) 11:45 pm AEST
It is recommended the Moodle submission remain in draft form until you have viewed the Turnitin report and made any necessary amendments before lodging by the due date and time.
Saturday 28/10/2023. Students will be advised if a delay emerges.
Before or on the nominated due date, upload your work following the on-screen instructions. Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the work is your own and is compliant with the CQU Harvard Referencing Guide. You will find additional material for this assessment on the unit Moodle site.
The assessment will be assessed on the following criteria:
- Show clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use and reference correctly supporting information.
- Present original thoughts and opinions.
- Communicate using correct spelling, grammar and punctuation.
- Use graphs, illustrations and other graphics to visually support your submission.
- Explain the core knowledge associated with this unit and show appropriate application of this knowledge.
- Describe the functions, materials and details of the major components along with the waste management strategies used and the regulatory inspections made when constructing a residential project
- Prepare drawings and build a model for a residential project
4 Online Quiz(zes)
This assessment relates to learning outcomes 1 to 5. Assessment 4 is a multiple-choice quiz, based on the following information:
- The quiz covers Topics 1-8 in the study guide.
- The quiz will open Week 12 Friday at 3.00pm for 1 week.
- The quiz will close Review/Exam Week Friday at 11.45pm (AEST) regardless of your progress, so attempt the quiz before 9.45pm (AEST) at the latest.
- The single-attempt 120 minute duration quiz can be taken at any time during this period.
- You may submit before the time limit ends.
- The quiz will comprise 20 questions with multiple choice answers provided for each question; pick only 1 choice when answering each question.
- Please note results for this assessment will be made available within a short period after the due date. Consequently, extension of time requests will be denied except under very exceptional circumstances.
1
Other
Review/Exam Week Friday (13 Oct 2023) 11:45 pm AEST
Saturday 14/10/2023 after the quiz due date and time expires
Test and apply knowledge based on the unit content.
- Describe the importance of the housing industry to a community and the prevailing regulations for Australian projects
- Explain the residential procurement process and the human roles required
- Describe the functions, materials and details of the major components along with the waste management strategies used and the regulatory inspections made when constructing a residential project
- Prepare drawings and build a model for a residential project
- Describe the temporary works, particularly scaffolding, formwork and falsework and plant selection processes used for residential construction.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
