Overview
This unit covers the administration of construction contracts including: control of extensions of time, variation, site instructions; chain of responsibilities; reporting and quality assurance; management of sub contractors and suppliers; head contract management. It also develops an understanding of contract management including: specification and the preparation of building contracts; the assessment of tenderers and tender negotiation; project planning; worker induction; documentation control and records management; progress reporting; contract inspections; management of variations, extensions of time, breaches of contract; liquidation damages and reporting; project commissioning and defects liability period activities and responsibilities improvement mechanisms and processes.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student evaluation
Streamline the reading materials and topics in a combined form. Having to read the Topics and then go to suggested readings, supplied literature and then do some external research is heavy going even to some one with a lot of time to do the course.
Content and presentation will be revisited before the next offering.
Feedback from Student evaluation
Was a very interesting subject, really enjoyed it. Neon was great, responded quickly to emails/forums and provided a lot of help. The course was easy to follow and the course material was all relevant.
Unit review will maintain the endorsement provided.
Feedback from Student evaluation
The assessment tasks are clearly explained and feedback was helpful. This was an informative unit.
The clarity of the assessment wording will be retained for the next offering.
- Describe the role as building professional for clients towards the successful completion of the project.
- Compare the different types of building contract arrangements.
- Apply systems and management procedures for the control of contract documentation and cost control.
- Formulate a tendering process for collecting and analysing tenders.
- Explain quality management and quality control with regard to contract administration.
- Explain variation administration, contract scope changes and contract review and evaluate their implications.
- Conduct a site meeting and site inspection.
- Explain the administration requirements and procedures of project completion and hand-over.
- Use effectively a range of appropriate communication modes.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | ||||||||
---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
1 - Written Assessment - 30% | |||||||||
2 - Written Assessment - 35% | |||||||||
3 - Written Assessment - 35% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | ||||||||
---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
1 - Communication | |||||||||
2 - Problem Solving | |||||||||
3 - Critical Thinking | |||||||||
4 - Information Literacy | |||||||||
5 - Team Work | |||||||||
6 - Information Technology Competence | |||||||||
7 - Cross Cultural Competence | |||||||||
8 - Ethical practice | |||||||||
9 - Social Innovation | |||||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Written Assessment - 30% | ||||||||||
2 - Written Assessment - 35% | ||||||||||
3 - Written Assessment - 35% |
Textbooks
Construction contract administration
Edition: 2 (2004 )
Authors: Goldfayl, G
UNSW Press
Sydney Sydney , NSW , Australia
ISBN: 0868405175
Binding: Paperback
The Aqua Group guide to procurement, tendering and contract administration
Edition: 4 (2016)
Authors: Hackett M, Robinson I & Stathem G
Blackwell Publishing
London London , Greater London , UK
ISBN: 9781118346549
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Microphone and headset
- MS Office or equivalent software
- Webcam
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
p.lawrence1@cqu.edu.au
Module/Topic
Topic 1: Contractual background
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 2: Types of contract arrangements
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 3: Traditional lump sum contracts
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 3: Traditional lump sum contracts
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 4: The tender period and pre-contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
No class
Chapter
Events and Submissions/Topic
Module/Topic
Topic 4: The tender period and pre-contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 5: Post contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 5: Post contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 5: Post contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 5: Post contract administration
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 6: Project completion
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Topic 6: Project completion
Chapter
Refer to Moodle for additional information.
Events and Submissions/Topic
Module/Topic
Review Period
Chapter
Events and Submissions/Topic
Module/Topic
Relax - there is no examination.
Chapter
Events and Submissions/Topic
Please post unit content questions on the Q&A forum in Moodle so everyone can benefit from the raised enquiry and the resultant reply.
For an individual issue, please initially email the lecturer who will aim to respond within 48 hours or so.
Success criteria
To pass this unit, you must receive a minimum mark of 16/35 for assessment 3 and achieve an aggregate score of 50% or better from the assessments.1 Written Assessment
The assessment has 3 questions.
Q1 Requires students to reflect on the professional team composition and the various types of contracts available in the industry.
Q2 Requires students to discuss the advantages and disadvantages of selected contracts.
Q3 Requires students to investigate an appropriate contracting procurement strategy.
Your submission must be done, via the assessment link in Moodle, by uploading your file, following the on-screen instructions.
Week 5 Tuesday (7 Aug 2018) 11:45 pm AEST
Week 7 Tuesday (28 Aug 2018)
The assessment will be assessed on the following criteria:
- Clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use of supporting information where appropriate and associated references.
- Original thought.
- Overall presentation and the ability to communicate using correct spelling, grammar and punctuation.
- Where appropriate the use of graphs, illustrations and other diagrams that visually support the context of your submission.
- Demonstration of the core knowledge associated with this course and appropriate application of this knowledge.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Ethical practice
- Describe the role as building professional for clients towards the successful completion of the project.
- Compare the different types of building contract arrangements.
- Apply systems and management procedures for the control of contract documentation and cost control.
- Use effectively a range of appropriate communication modes.
2 Written Assessment
This assessment has 3 questions.
Q1 Requires students to review methods for entering a building contract agreement.
Q2 Requires students to discuss control tools used for payment in contracts.
Q3 Requires students to explain documents used in project contracts administration.
Your submission must be done, via the assessment link in Moodle, by uploading your file, following the on-screen instructions.
Week 9 Tuesday (11 Sept 2018) 11:45 pm AEST
Week 11 Tuesday (25 Sept 2018)
The assessment will be assessed on the following criteria:
- Clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use of supporting information where appropriate and associated references.
- Original thought.
- Overall presentation and the ability to communicate using correct spelling, grammar and punctuation.
- Where appropriate the use of graphs, illustrations and other diagrams that visually support the context of your submission.
- Demonstration of the core knowledge associated with this course and appropriate application of this knowledge.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
- Explain quality management and quality control with regard to contract administration.
- Explain variation administration, contract scope changes and contract review and evaluate their implications.
- Use effectively a range of appropriate communication modes.
3 Written Assessment
This assessment has 3 questions:
Q1 Requires students to report procedural requirements associated with cost reporting, quality assurance and meetings.
Q2 Requires students to research aspects of project finalisation.
Q3 Requires students to investigate the importance of time on projects.
Your submission must be done, via the assessment link in Moodle, by uploading your file, following the on-screen instructions.
Review/Exam Week Tuesday (9 Oct 2018) 11:45 pm AEST
Friday 26/10/18
The assessment will be assessed on the following criteria:
- Clarity and succinctness of expression.
- Adequate coverage of topics discussed.
- Use of supporting information where appropriate and associated references.
- Original thought.
- Overall presentation and the ability to communicate using correct spelling, grammar and punctuation.
- Where appropriate the use of graphs, illustrations and other diagrams that visually support the context of your submission.
- Demonstration of the core knowledge associated with this course and appropriate application of this knowledge.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
- Apply systems and management procedures for the control of contract documentation and cost control.
- Formulate a tendering process for collecting and analysing tenders.
- Explain quality management and quality control with regard to contract administration.
- Explain variation administration, contract scope changes and contract review and evaluate their implications.
- Conduct a site meeting and site inspection.
- Explain the administration requirements and procedures of project completion and hand-over.
- Use effectively a range of appropriate communication modes.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.