Overview
This unit provides a direct focus on spatial design theories and assessment tasks incorporating relevant spatial design activities. This will enable the development of independent thinking to inform the creative design skills that are essential to the building design profession. Theories of Environmental Perception, Environmental Psychology and Environment Behaviour Studies (EBS) are included in some depth; as are matters of human comfort and spatial design to facilitate climatic design strategies. Spatial design for effective circulation, disabled access and emergency egress is also covered. Teamwork is included to enable the exercise of critical judgement in collaborative team activities. You will develop initiative and accept responsibility in your creative design role tasks to address these spatial needs in residential, community, commercial and industrial buildings.
Details
Pre-requisites or Co-requisites
Prerequisites: BLAR11045 and BLAR12036
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 3 - 2017
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Moodle – student evaluation.
Don't see a need for the group assignment
As one of the university’s endorsed graduate attributes, teamwork is key part of project procurement within the building industry.
Feedback from Moodle – student evaluation.
learning material was comprehensive. the material on how collaborations should operate effectively be distributed to other course lecturers.
Maintain the current delivery strategy including team collaboration within the unit.
- Integrate concepts of environmental perception, environmental psychology and Environment Behaviour Studies (EBS) in spatial design
- Assess human comfort needs and apply relevant design solutions for climatic conditions
- Evaluate circulation patterns within proposed spatial designs including disabled access and emergency egress
- Modify spatial design proposals for diverse cultural needs
- Analyse spatial needs and propose appropriate design solutions for large and complex buildings
- Participate effectively in team activities.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Presentation and Written Assessment - 30% | ||||||
2 - Presentation and Written Assessment - 30% | ||||||
3 - Presentation and Written Assessment - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Communication | ||||||
2 - Problem Solving | ||||||
3 - Critical Thinking | ||||||
4 - Information Literacy | ||||||
5 - Team Work | ||||||
6 - Information Technology Competence | ||||||
7 - Cross Cultural Competence | ||||||
8 - Ethical practice | ||||||
9 - Social Innovation | ||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Presentation and Written Assessment - 30% | ||||||||||
2 - Presentation and Written Assessment - 30% | ||||||||||
3 - Presentation and Written Assessment - 40% |
Textbooks
There are no required textbooks.
Additional Textbook Information
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Computer headset (microphone + speaker)
- MS Office or equivalent software
- Web camera (webcam)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
n.abbasi@cqu.edu.au
Module/Topic
Environmental psychology for design: definitions, significance, and practical implications
Chapter
Events and Submissions/Topic
Module/Topic
Human in the environment: behaviour settings, environmental perception/cognition, privacy regulation mechanisms, and individual and cultural factors in human-environment interactions
Chapter
Events and Submissions/Topic
Module/Topic
Sensing spaces: visual connection, acoustic, and thermal comfort
Chapter
Events and Submissions/Topic
Module/Topic
Moving through spaces: wayfinding, access, and spatial orientation
Chapter
Events and Submissions/Topic
Module/Topic
No online session - enjoy the break!
Chapter
Events and Submissions/Topic
Module/Topic
Home: residential environmental psychology
Chapter
Events and Submissions/Topic
Assessment 1 Due (Monday 11 Dec 2017) 11:45 PM AEST
Assessment 1 Due: Week 5 Monday (11 Dec 2017) 11:45 pm AEST
Module/Topic
Environmental psychology in different building types: spatial design for educational and health facilities
Chapter
Events and Submissions/Topic
Module/Topic
Environmental psychology in different building types: spatial design for workplace and retail facilities
Chapter
Events and Submissions/Topic
Module/Topic
Briefing for Assessment 3
Chapter
Events and Submissions/Topic
Module/Topic
Spatial design research methods: cognitive mapping, observation of physical traces and participant observation
Chapter
Events and Submissions/Topic
Assessment 2 Due Monday (15 Jan 2018) 11:45 PM AEST
Assessment 2 Due: Week 9 Monday (15 Jan 2018) 11:45 pm AEST
Module/Topic
Assessment 3 discussion/consultation session no.1
Chapter
Events and Submissions/Topic
Module/Topic
Spatial design that promote well-being and positive behaviours: social design, evidence-based design, and biophilic design
Chapter
Events and Submissions/Topic
Module/Topic
Assessment 3 discussion/consultation session no.2
Chapter
Events and Submissions/Topic
Module/Topic
Relax - there is no exam!
Chapter
Events and Submissions/Topic
Assessment 3 Due Friday (16 Feb 2018) 11:45 PM AEST
Assessment 3 Due: Exam Week Friday (16 Feb 2018) 11:45 pm AEST
1 Presentation and Written Assessment
This assessment task will develop your skills to review and critically analyse the practical implications of Environment Behaviour Studies (EBS) research. Task will address topics of Week 1, Week 2, Week 3, and Week 4.
Week 5 Monday (11 Dec 2017) 11:45 pm AEST
Week 7 Monday (1 Jan 2018)
The assessment will address the following attributes:
- Clarity of expression and comprehensive coverage of issues
- Demonstration of an understanding of all issues raised in
the study guide
- Use of quality supporting documentation
- Use of original thought and content
- Overall presentation and ability to communicate using
correct spelling, grammar and punctuation and the use of appropriate diagrams
and other graphics
- Demonstration and application of core knowledge.
Your assessment should be produced in electronic format. Before or on the nominated due date, upload your work following the on-screen instructions.
Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the submission is your own and that any cited work has been correctly referenced as per the CQU requirements.
- Integrate concepts of environmental perception, environmental psychology and Environment Behaviour Studies (EBS) in spatial design
- Assess human comfort needs and apply relevant design solutions for climatic conditions
- Modify spatial design proposals for diverse cultural needs
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Ethical practice
2 Presentation and Written Assessment
This assessment involves a collaborative work with one or two of your fellow students. Teamwork collaboration will be necessary to satisfactorily achieve the learning outcomes. Task will address topics of Week 5, Week 6, and Week 7.
Week 9 Monday (15 Jan 2018) 11:45 pm AEST
Week 11 Monday (29 Jan 2018)
The assessment will address the following attributes:
- Clarity of expression and comprehensive coverage of issues
- Demonstration of an understanding of all issues raised in the study guide
- Use of quality supporting documentation
- Use of original thought and content
- Overall presentation and ability to communicate using correct spelling, grammar and punctuation and the use of appropriate diagrams and other graphics
- Demonstration and application of core knowledge.
Your assessment should be produced in electronic format. Before or on the nominated due date, upload your work following the on-screen instructions.
Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the submission is your own and that any cited work has been correctly referenced as per the CQU requirements.
- Integrate concepts of environmental perception, environmental psychology and Environment Behaviour Studies (EBS) in spatial design
- Assess human comfort needs and apply relevant design solutions for climatic conditions
- Evaluate circulation patterns within proposed spatial designs including disabled access and emergency egress
- Analyse spatial needs and propose appropriate design solutions for large and complex buildings
- Participate effectively in team activities.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Ethical practice
3 Presentation and Written Assessment
This assessment will develop your skills to evaluate the impacts of built environments and to practice evidence-based design. Task will address topics of Week 1 to Week 11.
Exam Week Friday (16 Feb 2018) 11:45 pm AEST
After certification of grades or within two weeks of submission, which ever occurs later.
The assessment will address the following attributes:
- Clarity of expression and comprehensive coverage of issues
- Demonstration of an understanding of all issues raised in the study guide
- Use of quality supporting documentation
- Use of original thought and content
- Overall presentation and ability to communicate using correct spelling, grammar and punctuation and the use of appropriate diagrams and other graphics
- Demonstration and application of core knowledge.
Your assessment should be produced in electronic format. Before or on the nominated due date, upload your work following the on-screen instructions.
Your submission will be processed through the similarity detection software, Turnitin. You may amend your work based on the detection report. You must ensure that the submission is your own and that any cited work has been correctly referenced as per the CQU requirements.
- Integrate concepts of environmental perception, environmental psychology and Environment Behaviour Studies (EBS) in spatial design
- Assess human comfort needs and apply relevant design solutions for climatic conditions
- Evaluate circulation patterns within proposed spatial designs including disabled access and emergency egress
- Modify spatial design proposals for diverse cultural needs
- Analyse spatial needs and propose appropriate design solutions for large and complex buildings
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.