Overview
This unit provides an introduction to modern building construction technology with an emphasis on multi-unit and low-rise construction. In this unit, you will briefly touch upon the legislative requirements applicable to modern building construction. You will discover how key functions and performance requirements are linked to material selection, structural design, and construction methods. You will learn about advancements in materials technology and construction methods, how they are interlinked and all come together to influence the construction of buildings. The unit relates and outlines procedures, principles, and methods of modern construction of residential and commercial projects including multi-story buildings as designated by the National Construction Code for building classes 1 to 10.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2021
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
- Critically evaluate modern construction technology methods as they relate to the building and construction industry within national and international construction sectors
- Synthesise and evaluate the range of contemporary construction technology methods and how these affect construction management teams in terms of appropriate management techniques to ensure the construction is delivered on time, within budget, and quality
- Consider economic, environmental, social, and cultural sustainability when selecting relevant construction technology
- Generate and justify solutions to complex construction problems using cognitive, technical, and creative skills.
The Royal Australian Institute of Building has provided provisional approval.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Written Assessment - 30% | ||||
| 2 - Research Assignment - 50% | ||||
| 3 - Online Test - 20% | ||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Knowledge | ||||
| 2 - Communication | ||||
| 3 - Cognitive, technical and creative skills | ||||
| 4 - Research | ||||
| 5 - Self-management | ||||
| 6 - Ethical and Professional Responsibility | ||||
| 7 - Leadership | ||||
| 8 - Aboriginal and Torres Strait Islander Cultures | ||||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| 1 - Written Assessment - 30% | ||||||||
| 2 - Research Assignment - 50% | ||||||||
| 3 - Online Test - 20% | ||||||||
Textbooks
Barry's Advanced Construction of Buildings
Edition: 4th ed
Authors: Emmitt, S
Wiley UK
London London , UK
ISBN: 9781118977101
Binding: Paperback
Mitchell's Structure & Fabric Part 2
Edition: 7th
Authors: Foster, JS
Taylor & Francis
London London , UK
ISBN: 9780131970960
Binding: Paperback
Additional Textbook Information
If you prefer to study with a paper text, you can purchase one at the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code)
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
r.webber@cqu.edu.au
g.ruge@cqu.edu.au
Module/Topic
Brief introduction to legislation, building permits, public protection etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials
Module/Topic
Basement excavation and support etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Assignments 1 and 2 handed out - see Moodle for details
Module/Topic
Underpinning, secant and solider walls etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Site Logistics cranes, vertical access etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Foundations and footings etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Assignment 1 - To be handed in
Assignment No 1 - see Moodle site for specific details Due: Week 5 Friday (13 Aug 2021) 11:45 pm AEST
Module/Topic
Vacation Week No lectures or tutorials
Chapter
Events and Submissions/Topic
Module/Topic
Core Construction and stability etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Slab construction, service core, steel and fire protection
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Externals cladding and roofing
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Internals services etc.
Chapter
Events and Submissions/Topic
On going quizzes supplied at tutorials.
Module/Topic
Internals walls and fire safety
Chapter
Events and Submissions/Topic
Assignment 2 hand in date
On going quizzes supplied at tutorials.
Assignment No 2 - see Moodle site for details Due: Week 10 Friday (24 Sept 2021) 11:45 pm AEST
Module/Topic
Fit out and revision
Chapter
Events and Submissions/Topic
On going quizzes supplies at tutorials.
CLASS TEST Due: Week 11 Wednesday (29 Sept 2021) 11:45 pm AEST
Module/Topic
CLASS TEST DURING LECTURE TIMES -- SPECIFIC DATE AND TIME TO BE ADVISED
End of term industry presentation and networking event possibly during week 12
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
Assignment 1 - General description - Select a construction method as approved and focus on the technical aspects of your topic.
You need to commence the 3000 word assignment immediately.
N.B. Go to the Moodle site for specific details.
You need to obtain a pass in this assignment to pass this unit
Week 5 Friday (13 Aug 2021) 11:45 pm AEST
Submit on line via Moodle and pdf
Week 6 Friday (27 Aug 2021)
Student access Turnitin - Marks and feedback will be released as soon as the marking process is completed
The assignment will be assessed on quality of work submitted, relevance and coherence to the specific question and
tasks. This includes clear argumentation and use of quality references (in-text and bibliography).
The content prepared is to expands beyond the learning material provided and demonstrates the student's development
of the unit learning outcomes and graduate attributes.
Students will work with a marking rubric for self-review and receive formative and summative feedback.
- Critically evaluate modern construction technology methods as they relate to the building and construction industry within national and international construction sectors
- Synthesise and evaluate the range of contemporary construction technology methods and how these affect construction management teams in terms of appropriate management techniques to ensure the construction is delivered on time, within budget, and quality
- Knowledge
- Communication
- Cognitive, technical and creative skills
2 Research Assignment
Assignment 2 - General description - Select a construction method as approved and focus on the technical aspects of your topic.
The main difference between assignments 1 and 2 is that assignment 2 focuses on researching the latest technology or future technology through the location of specific research articles relevant to your topic.
You need to commence the 4000 - 5000 word assignment immediately in order to obtain the research evidence.
N.B. Go to the Moodle site for specific details.
You need to obtain a pass in this assignment to pass this unit
Week 10 Friday (24 Sept 2021) 11:45 pm AEST
Submit on line via Moodle and pdf
Week 12 Friday (8 Oct 2021)
Student access Turnitin - Marks and feedback will be released as soon as the marking process is completed
The assignment will be assessed on quality of work submitted, relevance and coherence to the specific question and
tasks. This includes clear argumentation and use of quality references (in-text and bibliography).
The content prepared is to expands beyond the learning material provided and demonstrates the student's development
of the unit learning outcomes and graduate attributes.
Students will work with a marking rubric for self-review and receive formative and summative feedback.
- Consider economic, environmental, social, and cultural sustainability when selecting relevant construction technology
- Generate and justify solutions to complex construction problems using cognitive, technical, and creative skills.
- Communication
- Cognitive, technical and creative skills
- Research
3 Online Test
CLASS TEST DURING LECTURE TIMES -- SPECIFIC DATE AND TIME TO BE ADVISED
Week 11 Wednesday (29 Sept 2021) 11:45 pm AEST
Week 11 Wednesday (29 Sept 2021)
Class test - You need to obtain a pass the class test to pass this unit
- Critically evaluate modern construction technology methods as they relate to the building and construction industry within national and international construction sectors
- Consider economic, environmental, social, and cultural sustainability when selecting relevant construction technology
- Knowledge
- Self-management
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
