CQUniversity Unit Profile
BMSC13020 Drug Discovery and Clinical Trials
Drug Discovery and Clinical Trials
All details in this unit profile for BMSC13020 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

The development of new therapeutic products for the medical biotechnology industry requires comprehensive knowledge of techniques used to investigate their effects on various biological pathways at a cellular level. This unit will provide you with an opportunity to apply theoretical and practical knowledge of medical biotechnology, drug development and pre-clinical testing of a new therapeutic product for industry commercialisation. You will develop new practical skills and gain experience in experimental models used to study human disease and apply these in a simulated industry environment. Your practical skills and demonstration of professional knowledge, attitude and compliance with relevant safety protocols will be assessed in a laboratory environment. Attendance at the practical activities at a compulsory residential school is a requirement of this unit. You will also develop the skills to communicate your findings to a broader audience in the medical biotechnology industry through both written reports and oral presentations.

Details

Career Level: Undergraduate
Unit Level: Level 3
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Pre-requisite: BMSC12010 Clinical Biochemistry

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 1 - 2024

Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Report
Weighting: 60%
2. Practical Assessment
Weighting: Pass/Fail
3. Presentation
Weighting: 40%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from SUTE data and student communication.

Feedback

Students appreciated the opportunity to engage one-on-one with the unit-coordinator throughout the term.

Recommendation

Continue to encourage student learning by providing opportunities for high levels of student engagement.

Feedback from SUTE data and student communication.

Feedback

Students commented that they liked the assessment tasks which allowed them to develop a hypothetical new drug for a disease of their choice.

Recommendation

Retain assessment tasks that allow students to place their learning in a real-world context.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Conduct molecular or cell-based tests used to study human disease
  2. Display professional behaviour consistent with the safety and ethical practices of the laboratory
  3. Critically analyse current scientific literature
  4. Think critically to solve problems during the development and testing of therapeutics
  5. Effectively communicate experimental findings to industry professionals through written reports and oral presentations.
Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Practical Assessment - 0%
2 - Report - 60%
3 - Presentation - 40%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures

Alignment of Assessment Tasks to Graduate Attributes

Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Practical Assessment - 0%
2 - Report - 60%
3 - Presentation - 40%
Textbooks and Resources

Textbooks

There are no required textbooks.

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
Referencing Style

All submissions for this unit must use the referencing styles below:

For further information, see the Assessment Tasks.

Teaching Contacts
Jason Steel Unit Coordinator
j.steel@cqu.edu.au
Schedule
Week 1 Begin Date: 04 Mar 2024

Module/Topic

Topic 1: Pharmaceutical Industry, Drivers and Stages of Drug Development

Chapter

Events and Submissions/Topic

Week 2 Begin Date: 11 Mar 2024

Module/Topic

Topic 2: From Diseases to Drugs

Chapter

Events and Submissions/Topic

Week 3 Begin Date: 18 Mar 2024

Module/Topic

Topic 3: Preclinical Toxicity

Chapter

Events and Submissions/Topic

Week 4 Begin Date: 25 Mar 2024

Module/Topic

Topic 4: Clinical Phase I Trials

Chapter

Events and Submissions/Topic

Week 5 Begin Date: 01 Apr 2024

Module/Topic

Topic 5: Regulatory Agencies and Quality Regulations

Chapter

Events and Submissions/Topic

Vacation Week Begin Date: 08 Apr 2024

Module/Topic

Chapter

Events and Submissions/Topic

Week 6 Begin Date: 15 Apr 2024

Module/Topic

Topic 6: Clinical Phase II Trials - Informed Patient Consent and Pharmacovigilance

Chapter

Events and Submissions/Topic

Submit topic for Assessment 1

Week 7 Begin Date: 22 Apr 2024

Module/Topic

Topic 7: Clinical Phase II Trials (cont) - Roles and Responsibilities

Chapter

Events and Submissions/Topic

Week 8 Begin Date: 29 Apr 2024

Module/Topic

Topic 8: Drug Manufacturing

Chapter

Events and Submissions/Topic

Week 9 Begin Date: 06 May 2024

Module/Topic

Topic 9: Clinical Phase III trials - Protocols

Chapter

Events and Submissions/Topic

Week 10 Begin Date: 13 May 2024

Module/Topic

Topic 10: Clinical Phase III trials (cont)- Clinical Project Management, Blinding and Global Trials

Chapter

Events and Submissions/Topic

Assessment 1 Due - Therapeutic Development Proposal (Monday 13th May)


Assessment 1: THERAPEUTIC DEVELOPMENT PROPOSAL Due: Week 10 Monday (13 May 2024) 11:59 pm AEST
Week 11 Begin Date: 20 May 2024

Module/Topic

Residential School. This is a compulsory laboratory session held at the Rockhampton campus.

Chapter

Events and Submissions/Topic

Assessment 2: Practical skills assessment

Week 12 Begin Date: 27 May 2024

Module/Topic

Topic 11: Clinical Phase III trials (cont) - Ethics, Consultants and Medical Advisory Boards

Chapter

Events and Submissions/Topic

Assessment 3 Due - Conference Presentation (Friday 31 May)


Assessment 3: CONFERENCE PRESENTATION Due: Week 12 Friday (31 May 2024) 11:59 pm AEST
Review/Exam Week Begin Date: 03 Jun 2024

Module/Topic

Chapter

Events and Submissions/Topic

Exam Week Begin Date: 10 Jun 2024

Module/Topic

Chapter

Events and Submissions/Topic

Term Specific Information

The unit coordinator is Dr Jason Steel. Please feel free to contact me on j.steel@cqu.edu.au or on 07 4930 6391.

TEXTBOOK

There is no prescribed textbook for BMSC13020 Drug Discovery and Clinical Trials. There will be selected reading materials provided to you on the Moodle site for this unit.

LECTURES

The lectures are delivered by Anthony Bishop, Chief Scientific Officer at Factor Therapeutics. Anthony is an industry expert, having spent his career in the pharmaceutical biotechnology industry. These lectures will be pre-recorded, and will integrate the fundamentals of pharmaceutical development with specific case studies from the biotechnology industry.

The tutorials are delivered by Dr Jason Steel and will re-enforce the information from the pre-recorded lectures, whilst relating the content to the assessment tasks. Tutorials are conducted adhoc as required by the students.

RESIDENTIAL SCHOOL

There is a compulsory Residential School associated with this unit, which is held from Tuesday 23rd May until Thursday 25th May 2023. The duration of this Residential School may be longer than those you have attended previously, however this is appropriate for the achievement of the practical skills, and demonstration of professional behaviour required. You will learn various new cell-based techniques during the Residential School that are highly relevant to the biotechnology and research industries. There are competency-based assessments associated with these techniques during this Residential School, so attendance is compulsory.

Assessment Tasks

1 Report

Assessment Title
Assessment 1: THERAPEUTIC DEVELOPMENT PROPOSAL

Task Description

The lecture content from Weeks 1 to 8 will provide you with knowledge regarding how potential therapeutics are developed and translated into clinical trials in the biotechnology industry. The lectures are integrated with specific case studies to support your learning with real-world examples. In this assessment, you will be tasked to use this knowledge, and survey the existing literature on similar case studies, to develop your own potential new therapeutic. Ideally, this will initially involve the selection of a specific disease which has a key "driver" that is targetable by pharmaceuticals. This may be a disease without current treatments available, or an existing disease where treatments are available, however there is scope for further therapeutic improvement. You will select this disease by Friday of Week 4 and confirm this selection with the Unit Coordinator. Upon approval to proceed, you will develop a written proposal that addresses the following sections:

Part A: Who is your target patient population? What are the key characteristics of the disease that this therapeutic is designed to target?

Part B: What pre-clinical models of the disease would you propose to use to test your therapeutic?

Part C: Describe the pre-clinical toxicity study that you may propose for your therapeutic?

Please note the following as a guide:

The entire written proposal should be from 1,500 to 2,000 words in length.

Accurately describe the disease that you are proposing, including the specific characteristics of the disease that your proposed drug is targeting. This may be a genetic abnormality (e.g. gene translocation or mutation), abnormality in the blood serum biochemistry (e.g. excessive protein or lipid in the blood) etc.

The text should be prepared using a standard word processing software (e.g. Microsoft Word) with the appropriate use of figures, diagrams or tables as required and saved as a PDF.

Specific referencing to scientific literature is essential. APA, Harvard or Vancouver style is acceptable, and the use of Endnote is highly encouraged.


Assessment Due Date

Week 10 Monday (13 May 2024) 11:59 pm AEST


Return Date to Students

2 weeks after submission


Weighting
60%

Minimum mark or grade
50%

Assessment Criteria

The assessment of this written report will be based on the demonstrated knowledge of disease mechanisms and therapeutic targets, rationalisation and justification of your arguments and ideas, support of these arguments and ideas using appropriate robust scientific literature and clarity of the proposal with accurate referencing.

A detailed marking rubric will be available on the Moodle site for this unit.


Referencing Style

Submission
Online

Submission Instructions
Please submit as a pdf file using the Moodle Assessment Submission Site.

Learning Outcomes Assessed
  • Critically analyse current scientific literature
  • Think critically to solve problems during the development and testing of therapeutics
  • Effectively communicate experimental findings to industry professionals through written reports and oral presentations.


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking

2 Practical Assessment

Assessment Title
ASSESSMENT 2: PRACTICAL LABORATORY SKILLS

Task Description

Laboratory-based (preclinical) testing of pharmaceuticals is essential to demonstrate the desired efficacy and biological activity in the treatment of various diseases. Employers within the biotechnology and medical research industries commonly use cell-based models of human disease, and will be looking for graduates with a sound knowledge and practical training in such techniques. Hence, you will be assessed in this unit regarding your performance in undertaking these cell-based techniques, as described below.

During the Residential School, you will be provided with a pharmaceutical agent that has been recently discovered to have activity against cervical cancers. The hypothetical biotechnology company you are employed in has recently identified this agent from a plant that is indigenous to Australia, and currently has little knowledge of how this drug works as an anti-cancer agent. Your task during the Residential School will be to undertake a series of experiments (as outlined in a Laboratory Manual provided on the Moodle site) to explore the anti-cancer properties and mechanism of action of this new potential treatment for cervical cancer. The below techniques will be used during the Residential School:

  • Culturing of human cervical cancer cells
  • Flow cytometry
  • Immunofluroescence microscopy
  • Quantitative real-time PCR

Sufficient training on both the practical and theoretical components of these procedures will be provided during the Residential School. You will complete each of these cell-based techniques (as outlined in the Laboratory Manual on the Moodle site for this unit) and will be assessed on the quality of the outcomes of these procedures. The assessment will be conducted as follows:

  • The unit coordinator will undertake the cell-based techniques in parallel with you as a benchmark of quality of the experimental output.
  • If your first attempt at the technique does not meet the minimum passing criteria, you will be allowed a subsequent maximum of (two) attempts at this technique.


Assessment Due Date

Assessment of practical skills will be completed during the residential school


Return Date to Students

Assessment of practical skills will be discussed during the residential school


Weighting
Pass/Fail

Assessment Criteria

You will be assessed on the following criteria:

  • Aseptic culture techniques
  • Quality and interpretation of scatterplots from flow cytometer
  • Quality of microscopy images
  • Quality of quantitative real-time PCR results
  • Analysis and interpretation of real-time PCR data
  • Adequate labeling of experimental samples

 


Referencing Style

Submission

No submission method provided.


Submission Instructions
You will be assessed on your practical skills during the Residential School

Learning Outcomes Assessed
  • Conduct molecular or cell-based tests used to study human disease
  • Display professional behaviour consistent with the safety and ethical practices of the laboratory


Graduate Attributes
  • Critical Thinking
  • Ethical practice

3 Presentation

Assessment Title
Assessment 3: CONFERENCE PRESENTATION

Task Description

Presentation of your research findings at scientific meetings or conferences will ensure dissemination of your discoveries to the broader scientific community. In this assessment, your task is to present research findings on the specific anti-cancer drug that you were using during residential school. The oral presentation of your research findings will begin with your experimental results that you achieved during the residential school. You will then present a series of logical subsequent experiments and anticipated results to conclusively determine the mechanism of action of this relatively unknown anti-cancer drug. You will refer to recent scientific literature in this field to design these subsequent experiments in an effort to draw robust conclusions on the mechanism of action of this drug. It is expected that the volume of experimental findings presented (and proposed) during this presentation will be sufficient for publication in a scientific journal (approximately 6 to 8 figures).

Please note that the presentation can be between 10-15 minutes in duration. It can be recorded and uploaded into the Moodle Assessment Submission Site. It should follow the below sections:

  • Introduction regarding the discovery of the drug and target patient population.
  • Presentation of methods used at Residential School
  • Experimental results achieved during Residential School
  • Presentation of proposed subsequent experiments and anticipated results
  • Conclusion drawn from existing results (from Residential School) and from proposed experiments

The presentation can be prepared using any standard presentation software (for example, Powerpoint or Keynote). Links to recording software and instructions for how to record the presentation will be available on the Moodle site.


Assessment Due Date

Week 12 Friday (31 May 2024) 11:59 pm AEST


Return Date to Students

2 weeks after submission


Weighting
40%

Minimum mark or grade
50%

Assessment Criteria

You will be assessed on the following criteria:

  • Clearly introduce the background information regarding the drug and accurately identify and describe the characteristics of the target patient population.
  • Accurate and clear presentation of methodology (both from existing protocols used at Residential School and subsequent proposed experiments).
  • Coherent and logical presentation of results in tabular or graphical format.
  • Clear presentation of microscopy images with accurate labeling.
  • Logical discussion of results with accurate and definitive conclusion outlined.
  • Appropriate use of referencing of scientific literature

A detailed marking rubric will be available on the Moodle site for this unit.


Referencing Style

Submission
Online

Learning Outcomes Assessed
  • Critically analyse current scientific literature
  • Think critically to solve problems during the development and testing of therapeutics
  • Effectively communicate experimental findings to industry professionals through written reports and oral presentations.


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking

Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?