Overview
In this unit, you will explore problems that require technological solutions as systems analysis involves determining what a system needs to accomplish. This unit covers concepts such as systems feasibility, user requirements elicitation, and systems modelling. You will learn how to analyse systems requirements, select and plan how to take the system through all stages of the system development life cycle.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 3 - 2020
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Staff
Quizzes as part of the assessments are helpful in student learning, yet scoring high marks in quizzes requires more effort.
Review the workloads required and assessment weights of the quizzes.
Feedback from Staff
Week 4 and 5 topics (cost-benefit analysis and economics of Project management) do not align with any of the ULOs. These topics are covered in depth in COIT12208.
Revise weekly contents to remove redundant topics (covered in other units) and to ensure the contents are aligned with the unit’s learning outcomes.
- Explain systems analysis concepts, terminologies, system analysis tasks, models, tools, techniques, and methodologies
- Select and plan appropriate models, tools, techniques, and methodologies in the systems analysis phase of a systems development project
- Apply information gathering techniques to derive system functionalities
- Construct modelling diagrams to depict system functionalities for users' requirements.
Australian Computer Society (ACS) recognises the Skills Framework for the Information Age (SFIA). SFIA is in use in over 100 countries and provides a widely used and consistent definition of ICT skills. SFIA is increasingly being used when developing job descriptions and role profiles.
ACS members can use the tool MySFIA to build a skills profile at https://www.acs.org.au/professionalrecognition/mysfia-b2c.html
This unit contributes to the following workplace skills as defined by SFIA. The SFIA7 code is included:
- Business Analysis (BUAN)
- Requirements Definition and Management (REQM)
- Business Modelling (BSMO)
- Data Modelling and Design (DTAN)
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Online Quiz(zes) - 10% | ||||
2 - Written Assessment - 20% | ||||
3 - Written Assessment - 30% | ||||
4 - Project (applied) - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Communication | ||||
2 - Problem Solving | ||||
3 - Critical Thinking | ||||
4 - Information Literacy | ||||
5 - Team Work | ||||
6 - Information Technology Competence | ||||
7 - Cross Cultural Competence | ||||
8 - Ethical practice | ||||
9 - Social Innovation | ||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Online Quiz(zes) - 10% | ||||||||||
2 - Written Assessment - 20% | ||||||||||
3 - Written Assessment - 30% | ||||||||||
4 - Project (applied) - 40% |
Textbooks
Systems Analysis and Design in a Changing World
Edition: 7th (2016)
Authors: John Satzinger, Robert Jackson and Stephen Burd
Engage
Australia
ISBN: 9781305117204
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- MS Office or equivalent software
- MS Project
- MS Visio
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
p.poon@cqu.edu.au
Module/Topic
An Overview of Systems Analysis and Design
Chapter
Chapter 1 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Approaches to Systems Development
Chapter
Chapter 10 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
The Role of Systems Analyst
Chapter
Online Chapter A (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Project Planning and Project Management
Chapter
Chapter 11 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Project Management Techniques
Chapter
Online Chapter C (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Investigating Systems Requirements
Chapter
Chapter 2 (Prescribed textbook)
Events and Submissions/Topic
Individual Assignment 1: Systems Development & Planning
Individual Assignment 1: Systems Development and Planning Due: Week 6 Wednesday (23 Dec 2020) 11:00 am AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Identifying User Stories and Use Cases
Chapter
Chapter 3 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Domain Modeling
Chapter
Chapter 4 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Use Case Modeling
Chapter
Chapter 5 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Designing the User Interface
Chapter
Chapter 8 (Prescribed textbook)
Events and Submissions/Topic
Individual Assignment 2: Systems Analysis and Modeling
Individual Assignment 2: Systems Analysis and Modeling Due: Week 10 Wednesday (27 Jan 2021) 11:00 am AEST
Module/Topic
Deploying the New System
Chapter
Chapter 14 (Prescribed textbook)
Events and Submissions/Topic
Module/Topic
Revision
Chapter
All previously covered chapters (Prescribed textbook)
Events and Submissions/Topic
Individual Project
Individual Assignment 3 Due: Week 12 Friday (12 Feb 2021) 11:00 am AEST
Module/Topic
Chapter
Events and Submissions/Topic
Associate Professor Pak Poon (Unit Coordinator)
Office: Room 6.15, Level 6, School of Engineering and Technology, 120 Spencer Street, Melbourne VIC 3000 (Melbourne Campus)
Email: p.poon@cqu.edu.au
Phone: (03) 9616 0693
1 Online Quiz(zes)
There will be four quizzes to assess your understanding of the unit materials. The quizzes will be held during the tutorial sessions (or other designated times) in Week 4, 7, 9 and 11.
Late submissions are not possible for online quizzes. Supplementary quizzes will only be arranged under very exceptional circumstances (e.g., illness supported by a medical certificate).
Within 2 weeks from the quiz date.
This assessment consists of multiple questions. Each question will be marked according to its correctness.
- Communication
- Problem Solving
- Information Literacy
- Information Technology Competence
- Explain systems analysis concepts, terminologies, system analysis tasks, models, tools, techniques, and methodologies
- Select and plan appropriate models, tools, techniques, and methodologies in the systems analysis phase of a systems development project
2 Written Assessment
Imagine you have recently commenced a systems development project in the role of a systems analyst. You will be provided with a Project Case Study. You are required to identify critical elements of the project, undertake analysis tasks and prepare a report. Your report will document aspects such as:
- The rationale behind your selected systems development methodology;
- Your project plan including a scheduling chart; and
- A cost-benefit analysis.
You will be required to use software such as Microsoft Excel and Microsoft Project.
Week 6 Wednesday (23 Dec 2020) 11:00 am AEST
Late submissions are subject to the university's late submission penalty policies
Week 8 Friday (15 Jan 2021)
The assessment criteria will cover the contents and the presentation/format of the submission. In addition, all the different parts of the assessment should be written in a professional and coherent manner. A detailed marking template will be available along with the assignment details on the Moodle unit website.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Ethical practice
- Select and plan appropriate models, tools, techniques, and methodologies in the systems analysis phase of a systems development project
- Apply information gathering techniques to derive system functionalities
3 Written Assessment
This assignment follows on the Assignment 1 and uses the same Project Case Study. Assignment 2 requires you to apply the relevant analysis and modeling techniques. You will select, justify and use information-gathering techniques to identify, analyse and specify requirements of an information system. You will then design an information system using models such as use case diagram, domain model class diagram, activity diagram and system sequence diagram. You will be required to use software such as Microsoft Visio to develop the required modeling diagrams.
Week 10 Wednesday (27 Jan 2021) 11:00 am AEST
Late submissions are subject to he university's late submission penalty policies.
Week 12 Wednesday (10 Feb 2021)
The assessment criteria will cover the contents and the presentation/format of the submission. In addition, all the different parts of the assessment should be written in a professional and coherent manner. A detailed marking template will be available along with the assignment details on the Moodle unit website.
- Communication
- Problem Solving
- Critical Thinking
- Information Technology Competence
- Apply information gathering techniques to derive system functionalities
- Construct modelling diagrams to depict system functionalities for users' requirements.
4 Project (applied)
This individual project follows Assignments 1 and 2. It focuses on system implementation, testing, training, deployment and other related issues.
Week 12 Friday (12 Feb 2021) 11:00 am AEST
Late submission are subject to the university's late submission penalty policies.
Expected to return to students no later than 2 weeks after submission due date.
The assessment criteria will cover the contents and the presentation/format of the submission. In addition, all the different parts of the assessment should be written in a professional and coherent manner. A detailed marking template will be available along with the assignment details on the Moodle unit website.
- Communication
- Problem Solving
- Critical Thinking
- Ethical practice
- Explain systems analysis concepts, terminologies, system analysis tasks, models, tools, techniques, and methodologies
- Construct modelling diagrams to depict system functionalities for users' requirements.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.