CQUniversity Unit Profile
COIT12206 TCP/IP Principles and Protocols
TCP/IP Principles and Protocols
All details in this unit profile for COIT12206 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

This unit provides you with an in-depth understanding of the role and function of TCP/IP protocols in contemporary network communication. The unit details the underlying technologies and relationships between the five network layers. You will gain an understanding of how data is encapsulated, addressed and routed over networks. On completion of the unit, you will be able to explain the mechanisms used to facilitate communication between applications over the Internet.

Details

Career Level: Undergraduate
Unit Level: Level 2
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Prerequisite: COIT11233 or COIT11238 Note: Students who are currently enrolled in or who have previously completed COIT13147 Networks cannot enrol in this unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 1 - 2019

Brisbane
Cairns
Melbourne
Online
Rockhampton
Sydney
Townsville

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Written Assessment
Weighting: 20%
2. Practical Assessment
Weighting: 30%
3. Examination
Weighting: 50%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from Students and teaching team's feedback

Feedback

Some of the textbook content is becoming out of date.

Recommendation

Update to a new edition of the textbook if available, or identify and select an alternative textbook.

Feedback from Students feedback

Feedback

Students enjoyed the practical and industry relevant nature of the lecture content and lab activities.

Recommendation

Continuous review of the unit content to ensure realistic and relevant examples are used throughout.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Explain the function and relationship between the protocols in the five network layers
  2. Design IP network addressing schemes
  3. Interpret and deconstruct frames, packets, datagrams, segments and application-layer message formats
  4. Develop routing tables based on IPv4 routing protocols
  5. Compare UDP and TCP Transport Layer protocols
  6. Illustrate how application programs use the Network, Transport and Application Layer protocols (e.g. DNS, FTP, SMTP, SNMP, and HTTP, etc.)
  7. Contrast the emerging IPv6 protocol with IPv4.

Australian Computer Society (ACS) recognises the Skills Framework for the Information Age (SFIA). SFIA is in use in over 100 countries and provides a widely used and consistent definition of ICT skills. SFIA is increasingly being used when developing job descriptions and role profiles.

ACS members can use the tool MySFIA to build a skills profile at https://www.acs.org.au/professionalrecognition/mysfia-b2c.html

This unit contributes to the following workplace skills as defined by SFIA. The SFIA code is included:

  • Network Support (NTAS)
  • Problem Management (PBMG)
  • Data Analysis (DTAN)
  • System Design (DESN)
  • Service Desk and Incident Management (USUP)

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment - 20%
2 - Practical Assessment - 30%
3 - Examination - 50%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures

Alignment of Assessment Tasks to Graduate Attributes

Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment - 20%
2 - Practical Assessment - 30%
3 - Examination - 50%
Textbooks and Resources

Textbooks

Prescribed

TCP/IP Protocol Suite

Edition: 4/e (2010)
Authors: Forouzan, B
McGraw-Hill
London London , UK
ISBN: 9780073376042
Binding: Hardcover

Additional Textbook Information

Copies are available to purchase from the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code)

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
  • Wireshark
  • Cisco Packet Tracer 7.1.1
Referencing Style

All submissions for this unit must use the referencing style: Harvard (author-date)

For further information, see the Assessment Tasks.

Teaching Contacts
Biplob Ray Unit Coordinator
b.ray@cqu.edu.au
Schedule
Week 1 Begin Date: 11 Mar 2019

Module/Topic

Course Introduction; The OSI Model and the TCP/IP Protocol Suite; Numbering Systems

Chapter

2 & Appendix B

Events and Submissions/Topic

Week 2 Begin Date: 18 Mar 2019

Module/Topic

Underlying Technologies

Chapter

3

Events and Submissions/Topic

Week 3 Begin Date: 25 Mar 2019

Module/Topic

Introduction to Network Layer; IPv4 Addressing Basics

Chapter

4 & 5

Events and Submissions/Topic

Week 4 Begin Date: 01 Apr 2019

Module/Topic

Internet Protocol Version 4 (IPv4)

Chapter

7

Events and Submissions/Topic

Week 5 Begin Date: 08 Apr 2019

Module/Topic

IPv6 Addressing; IPv6 Protocol; Internet Control Message Protocol(ICMP)

Chapter

26, 27, 9 & 28

Events and Submissions/Topic

Vacation Week Begin Date: 15 Apr 2019

Module/Topic

Chapter

Events and Submissions/Topic

Week 6 Begin Date: 22 Apr 2019

Module/Topic

Introduction to the Transport Layer; User Datagram Protocol (UDP)

Chapter

13 & 14

Events and Submissions/Topic

Networking Assignment 1 Due: Week 6 Friday (26 Apr 2019) 11:55 pm AEST
Week 7 Begin Date: 29 Apr 2019

Module/Topic

Transmission Control Protocol (TCP)

Chapter

15

Events and Submissions/Topic

Week 8 Begin Date: 06 May 2019

Module/Topic

IPv4 Addressing in Depth

Chapter

5

Events and Submissions/Topic

Week 9 Begin Date: 13 May 2019

Module/Topic

Delivery and Forwarding of IP Packets; Address Resolution Protocol (ARP)

Chapter

6 & 8

Events and Submissions/Topic

Week 10 Begin Date: 20 May 2019

Module/Topic

Unicast Routing Protocols (RIP, OSPF, and BGP)

Chapter

11

Events and Submissions/Topic

Networking Assignment 2 Due: Week 10 Friday (24 May 2019) 11:59 pm AEST
Week 11 Begin Date: 27 May 2019

Module/Topic

Host Configuration - DHCP; Domain Name System (DNS)

Chapter

18 & 19

Events and Submissions/Topic

Week 12 Begin Date: 03 Jun 2019

Module/Topic

File Transfer - FTP and TFTP; World Wide Web and HTTP; Network Management: SNMP

Chapter

21, 22, & 24

Events and Submissions/Topic

Review/Exam Week Begin Date: 10 Jun 2019

Module/Topic

Chapter

Events and Submissions/Topic

Exam Week Begin Date: 17 Jun 2019

Module/Topic

Chapter

Events and Submissions/Topic

Term Specific Information

Welcome to Term 1 2019!

During the term, if you are enrolled in a campus class, please contact the respective conducting lead lecturer on that campus with your questions. Their Unit Contact details are found on the unit page on Moodle ("Information" box, top left column). Distance and online students should contact me if you have any questions which are not suitable to be asked through the unit forums.

There is much reading to cover during the term, so you are encouraged to get your recommended textbook early, and not miss any classes and assessments. I look forward to your active participation in class and through the forums.

Have an enjoyable term!

Dr. Biplob Ray (b.ray@cqu.edu.au) Unit Coordinator - T1, 2019 COIT12206 TCP/IP Principles and Protocols

Ph: +61 3 96160695 | X 50695

Assessment Tasks

1 Written Assessment

Assessment Title
Networking Assignment 1

Task Description

This assignment requires you to answer multiple independent questions to test your understanding of topics such as
1. computer networking components and layers,
2. appropriate use of protocols in a specific networking and transport layers,
3. IP addressing in networking layer and basics of Pv4 
4. execute network commands and understand the output.
Detailed information about this assessment can be accessed from the unit website in Moodle.


Assessment Due Date

Week 6 Friday (26 Apr 2019) 11:55 pm AEST

Online via Moodle


Return Date to Students

Week 8 Friday (10 May 2019)

Online via Moodle


Weighting
20%

Assessment Criteria

The assessment report will be marked based on the level of

  • the correctness of the answer,
  • accuracy and clarity of explanations.

More detailed marking criteria can be accessed from Moodle.


Referencing Style

Submission
Online

Submission Instructions
Assignments must be submitted online in .doc or .docx format.

Learning Outcomes Assessed
  • Explain the function and relationship between the protocols in the five network layers
  • Compare UDP and TCP Transport Layer protocols
  • Contrast the emerging IPv6 protocol with IPv4.


Graduate Attributes
  • Problem Solving
  • Critical Thinking
  • Information Literacy
  • Information Technology Competence

2 Practical Assessment

Assessment Title
Networking Assignment 2

Task Description

This assignment requires you to perform a number of practical activities to answer multiple independent questions on topics such as
1. appropriateness of network configuration commands and IPv4 and/or IPv6 calculations to configure a network.
2. solve problems relating to the routing of a specific network.
3. evaluate the functions of protocols and standards in network, transport and application layers.
4. appropriateness of networking techniques and implementing them in a network.
Detailed information about this assessment can be accessed from the unit website in Moodle.


Assessment Due Date

Week 10 Friday (24 May 2019) 11:59 pm AEST

Online via Moodle


Return Date to Students

Week 12 Friday (7 June 2019)

Online via Moodle


Weighting
30%

Assessment Criteria

The assessment report will be marked based on

  • the correctness of simulated network configuration,
  • the correctness of the answer written in the report,
  • accuracy and clarity of explanations.

More detailed marking criteria can be accessed from Moodle.


Referencing Style

Submission
Online

Submission Instructions
Assignments must be submitted online in .doc or .docx format.

Learning Outcomes Assessed
  • Design IP network addressing schemes
  • Interpret and deconstruct frames, packets, datagrams, segments and application-layer message formats
  • Develop routing tables based on IPv4 routing protocols
  • Illustrate how application programs use the Network, Transport and Application Layer protocols (e.g. DNS, FTP, SMTP, SNMP, and HTTP, etc.)


Graduate Attributes
  • Problem Solving
  • Critical Thinking
  • Information Literacy
  • Information Technology Competence

Examination

Outline
Complete an invigilated examination

Date
During the examination period at a CQUniversity examination centre

Weighting
50%

Length
180 minutes

Exam Conditions
Open Book

Materials
Dictionary - non-electronic, concise, direct translation only (dictionary must not contain any notes or comments).
Calculator - non-programmable, no text retrieval, silent only
Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?