CQUniversity Unit Profile
COIT13232 Business Analysis Project
Business Analysis Project
All details in this unit profile for COIT13232 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

This capstone unit in the business analysis stream of the Bachelor of Information Technology course is designed so that you can demonstrate your learning across the whole course of study before making the transition to the next stage of your career. You are required to demonstrate and apply the skills you have developed in earlier business analysis specialisation units by undertaking an authentic task group project or an industry project (in consultation with the Unit Coordinator). Skills will be demonstrated through conducting a group project addressing the production of a project plan, a quality plan, progress reports and a project review. In addition, appropriate business analysis and process modelling artifacts such as process improvement models and requirements specifications, and a project report will be submitted. The group project will have a designated customer (or acting customer) and you will be required to produce typical project management artifacts associated with a commercial project. You will be expected to participate in both regular progress meetings involving relevant stakeholders and technical meetings. You are encouraged to include the artifacts produced in the project as part of a work portfolio.

Details

Career Level: Undergraduate
Unit Level: Level 3
Credit Points: 12
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.25

Pre-requisites or Co-requisites

Prerequisites: (COIS13064 and COIT12203) or (COIT12208 and COIT12203) Corequisites: COIS13013 and COIT13231 Antirequisites: If you have completed any of these units - COIT13230, COIT13236 or COIT13239, then you cannot enrol in this unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 1 - 2019

Brisbane
Melbourne
Online
Rockhampton
Sydney

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Practical and Written Assessment
Weighting: 55%
2. Group Work
Weighting: 25%
3. Portfolio
Weighting: 20%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from Moodle student evaluation

Feedback

Good teaching practices.

Recommendation

Continue with the current teaching practices and keep students involved.

Feedback from Self-reflection

Feedback

Assessment expectation.

Recommendation

Review the assessment specification.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Demonstrate an ability to work in a project team environment and implement business solutions using a range of tools, techniques and methods
  2. Create the project management artefacts required in a typical business analysis project
  3. Manage a small business analysis project
  4. Identify change management issues that may arise owing to changing business practices
  5. Produce a report recommending improvements to current business practices
  6. Demonstrate work readiness in terms of technical skills, communication skills, and both professional and ethical behaviour.

Australian Computer Society (ACS) recognises the Skills Framework for the Information Age (SFIA). SFIA is in use in over 100 countries and provides a widely used and consistent definition of ICT skills. SFIA is increasingly being used when developing job descriptions and role profiles.
ACS members can use the tool MySFIA to build a skills profile at https://www.acs.org.au/professionalrecognition/mysfia-b2c.html
This unit contributes to the workplace skills as defined by SFIA. The SFIA code is included:
  • Analytics (INAN)
  • Research (RSCH)
  • Project Management (PRMG)
  • Business Analysis (BUAN)
  • Data analysis (DTAN)
  • Systems Design (DESN)
  • Requirements Definition and Management (REQM),
  • Business Modelling (BSMO)
  • Stakeholder and Relationship Management (RLMT)
  • Change Management (CHMG)
  • Problem Management (PBMG).

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Practical and Written Assessment - 55%
2 - Group Work - 25%
3 - Portfolio - 20%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures

Alignment of Assessment Tasks to Graduate Attributes

Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Practical and Written Assessment - 55%
2 - Group Work - 25%
3 - Portfolio - 20%
Textbooks and Resources

Textbooks

There are no required textbooks.

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
  • Modelling software such as Microsoft Visio
Referencing Style

All submissions for this unit must use the referencing style: Harvard (author-date)

For further information, see the Assessment Tasks.

Teaching Contacts
Indra Seher Unit Coordinator
i.seher@cqu.edu.au
Schedule
Week 1 Begin Date: 11 Mar 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Form project groups: please see Moodle unit website.

Attend introduction to project by facilitator, read the "Guide to Undertaking a Capstone Project" on the unit website.

Please note that the capstone project will be different for each group, and therefore there won't be any firm guidelines. You need to discuss the procedure with your campus facilitator.

Arrange an appointment time with your project mentor during the workshop hours to discuss your project options.

Week 2 Begin Date: 18 Mar 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project mentor.

Week 3 Begin Date: 25 Mar 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator. Submit Group Project Proposal and Plan via Moodle.


Week 4 Begin Date: 01 Apr 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator.

Week 5 Begin Date: 08 Apr 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator.

Vacation Week Begin Date: 15 Apr 2019

Module/Topic

Chapter

Events and Submissions/Topic

Week 6 Begin Date: 22 Apr 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator. Submit Progress Report 1 via Moodle.


Week 7 Begin Date: 29 Apr 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator. Submit Draft Final Report via Moodle.


Week 8 Begin Date: 06 May 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator.

Week 9 Begin Date: 13 May 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator. Submit Progress Report 2 via Moodle.


Week 10 Begin Date: 20 May 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Presentation of DRAFT final report (including feedback on your report submitted in Week 7). 

Presentations to be held in class as per arrangements made with your campus project facilitator.

The feedback from this assessment will enable you to improve your final copy of your report to be submitted in Week 13. 

Week 11 Begin Date: 27 May 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator.

Week 12 Begin Date: 03 Jun 2019

Module/Topic

Workshop

Chapter

Events and Submissions/Topic

Weekly meeting with project facilitator.Submit reflective ePortfolio via Mahara/Moodle.


Review/Exam Week Begin Date: 10 Jun 2019

Module/Topic

Chapter

Events and Submissions/Topic

Submit Self and Peer Assessment, Final Project Report, and Project Working Documentation.


Exam Week Begin Date: 17 Jun 2019

Module/Topic

Chapter

Events and Submissions/Topic

Term Specific Information

Unit Coordinator: Indra Seher

Sydney Campus

Email: i.seher@cqu.edu.au

Assessment Tasks

1 Practical and Written Assessment

Assessment Title
Project Proposal and Plan, Group Project Report, Group Working Documentation and Self and Peer Assessment (SPA)

Task Description

This assessment is GROUP WORK. All members of each group are required to UPLOAD a copy of the work.

This is the major assessment for your project and comprises four parts: project proposal and project plan, team meeting documentation including agenda and minutes, self and peer assessment and project report.

You are required (as a group with up to four members) to write a report based on your project. In this project report, you need to evaluate current business systems and processes, and propose improvements. You are required to demonstrate your learning and integration of knowledge from prior units undertaken in your degree.

Please refer to the Moodle unit website for more detail information in relation to this assessment.

Note: Please contact the unit coordinator if you have a genuine problem and are unable to participate in a group.

You are strongly recommended to source your own project instead of using a case study. With permission of your employer, your project can be based on your work place.

Your project should be of sufficient complexity for you to demonstrate your knowledge and skills, but still be small enough to complete it within the term. If you are in doubt, please contact the unit coordinator or your local lecturer.


Assessment Due Date

As per schedule and day and time as per Moodle assignment submission page.


Return Date to Students

Project Proposal and Plan within 2 weeks of submission, All other parts of the Assessment-1 on the day of Certification of Grades.


Weighting
55%

Assessment Criteria

Reports and proposals are to be uploaded as MS Word documents. You may also upload MS Project documents to support your work. No other type of upload will be accepted, with the exception of a ZIP file for Project Working Documentation.


The project documentation will be assessed on the quality of content. The assessment criteria for each part of this assessment, as described under Task Description is as follows:

Project Proposal and Plan - 10%
The proposal and plan will include sections for project description, project scope, objectives and constraints, statement of work, team members, responsibilities and responsibility matrix, work breakdown structure, project schedule, risk assessment and plan, and quality plan.

Please see the Moodle unit website for the report template.

Project Working Documentation - 5%
The team's project working documentation includes team meeting agenda, minutes arising from the various meetings, action sheet items, and project working papers.

Self and Peer Assessment - 10%
Each team will be required to evaluate the other team members and the team's performance, both from a personal viewpoint and as a team member.

Project Report - 30%
As a minimum the project report will include sections for scope of the report, objectives and constraints of the report, terms of reference, executive summary, project management, introduction, strategic alignment, description of current system, stakeholder analysis and management, requirements methodology, requirements statement, candidate evaluation, change management issues, recommendations and report summary.

Please see Moodle unit website for more specific marking criteria and report template.


Referencing Style

Submission
Online

Submission Instructions
via Moodle

Learning Outcomes Assessed
  • Demonstrate an ability to work in a project team environment and implement business solutions using a range of tools, techniques and methods
  • Create the project management artefacts required in a typical business analysis project
  • Manage a small business analysis project
  • Identify change management issues that may arise owing to changing business practices
  • Produce a report recommending improvements to current business practices
  • Demonstrate work readiness in terms of technical skills, communication skills, and both professional and ethical behaviour.


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking
  • Information Literacy
  • Team Work
  • Information Technology Competence
  • Ethical practice
  • Social Innovation

2 Group Work

Assessment Title
Group Progress Reports, Draft Final Report and Group Presentation

Task Description

This assessment is GROUP WORK. All members of each group are required to UPLOAD a copy of the work.

This assessment comprises three sections: Progress Reports, Draft Final report and Presentation of DRAFT project report.

Progress Reports

Two progress reports are expected from each group throughout the term. Submission dates via Moodle are as per the weekly schedule.

Draft Final Report

Submission of a daft of your final report up to the Stakeholder Analysis section. You will receive feedback enabling you to improve your draft report for presentation in Week 10. Due as per the weekly schedule.

Presentation of DRAFT project report

Each group will be required to present their DRAFT project report to colleagues and staff for feedback in Week 10. Each group will have until Week 13 (due date for Project Report) to improve the report based on feedback received at the time of the presentation. Documentation regarding the presentation will be submitted via Moodle.

Distance students

The time of your presentations and the technology employed will be determined on an individual basis, but most likely this will be via Zoom. Please contact the unit coordinator to arrange a time for your presentation.

Failure to submit this assessment will disadvantage your overall marks.


Assessment Due Date

As per schedule and day and time as per Moodle


Return Date to Students

Within 2 weeks of submission


Weighting
25%

Assessment Criteria

Reports are to be uploaded as MS Word documents, MS Project documents to support your work or MS PowerPoint slides. No other type of upload will be accepted.

Progress Reports - 5%

Each progress report will contain a review of the project. Assessment will be on the completeness of the content of the report.

Draft Final Report - 10%

As a minimum the draft project report will include sections for scope of the report, objectives and constraints of the report, terms of reference, executive summary, project management, introduction, strategic alignment, description of current system, stakeholder analysis and management.

Presentation - 10%

Each group will be allocated a time in Week 10 to present a draft of their project report. Each presentation will be assessed on the following criteria:

Group marks will be based on:

  • Preparation and consistency of presentation
  • Set up and use of visual aids
  • Timing of presentation including Q&A
  • Continuity and flow from one presenter to the next
  • Presentation content is relevant to the topic
  • Content is clear, concise and relevant
  • Response to questions during Q&A

Individual marks for presentation will be based on:

  • Appropriate dress
  • Presentation manner
  • Content is explained well

Please see Moodle unit website for more specific marking criteria.


Referencing Style

Submission
Online

Submission Instructions
Progress Reports via Moodle as per Schedule; Draft Final Report as per weekly schedule, Presentation in class and by arrangement with unit coordinator/local lecturer.

Learning Outcomes Assessed
  • Demonstrate an ability to work in a project team environment and implement business solutions using a range of tools, techniques and methods
  • Create the project management artefacts required in a typical business analysis project
  • Manage a small business analysis project
  • Produce a report recommending improvements to current business practices


Graduate Attributes
  • Communication
  • Problem Solving
  • Critical Thinking
  • Information Literacy
  • Team Work
  • Information Technology Competence
  • Ethical practice

3 Portfolio

Assessment Title
Individual ePortfolio

Task Description

You are required to download your portfolio in PDF and submit your work in Moodle. You are further required to include your Mahara Secret URL with your uploaded work. No other type of upload will be accepted.

This is an individual assessment.

An e-portfolio is a learning tool that enables students to accumulate evidence of learning achievement. In this unit we will use Mahara as the learning tool. Please refer to Moodle unit website for more detail instructions on how to produce Mahara portfolio and the assessment criteria.

Please review the example links on the Moodle unit website.


Assessment Due Date

Return Date to Students

Returned on the day of Certification of Grades.


Weighting
20%

Assessment Criteria

A project portfolio is to be maintained by every student individually.

Entries are to be made in your portfolio on each occasion that work is undertaken on the project, detailing the work done, time taken, difficulties experienced, and other issues that may arise. It is to be a record of every activity undertaken by you in developing the project.

Entries will be made in the portfolio on a weekly basis starting from teaching Week 3 until (and including) Week 12.

The portfolio will contain work that has been integrated into the group project work, as evidenced by information supplied in the portfolio as to where the work is located in the final group report submission.

Please see Moodle unit website for more specific marking criteria.

Failure to submit a portfolio will disadvantage your overall marks.


Referencing Style

Submission
Online

Submission Instructions
via Mahara and Moodle using Secret URL

Learning Outcomes Assessed
  • Identify change management issues that may arise owing to changing business practices
  • Demonstrate work readiness in terms of technical skills, communication skills, and both professional and ethical behaviour.


Graduate Attributes
  • Communication
  • Critical Thinking
  • Information Literacy
  • Information Technology Competence
  • Ethical practice

Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?