Overview
This unit provides you with fundamental skills and knowledge in the design and operation of computer networks. It deals in-depth with the techniques described in current Internet protocols to forward data packets from source to destination through different types of networks. You will focus on the Transport and Internet layer functions with emphasis on IPv4 addressing as well as switching and routing technologies. An introduction to IPv6 and transition issues is included. The unit covers these functions in both Local Area Networks (LANs) and Wide Area Networks (WANs). The function of the key protocols in wireless networks are also discussed, ensuring a well-rounded grounding to enable easier adaptation to imminent significant developments such as the global adoption of IPv6 and the growing dominance of wireless networking in business and everyday life. Delivery of this comprehensive content is through a weekly lecture and tutorial which includes theory and some hands-on lab activity where available.
Details
Pre-requisites or Co-requisites
Prerequisite: COIT20246 Networking and Cyber Security Anti-requisite: COIT20229 Networking with TCI/IP.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 3 - 2024
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student feedback
Consider incorporating more practical activities, e.g. cloud computing, into the assessments to enhance hands-on learning and reinforce students' understanding of the learning materials.
Integrate hands-on lab exercises using cloud computing tools such as Microsoft Azure into the unit. Assessing one or more of the lab activities should serve to reinforce student learning and enhance their practical experience.
Feedback from Student feedback, reflection
Ensure feedback on assessment is clear, informative and practical to students.
Establish a minimum standard for delivering marker feedback that emphasises clarity, informativeness, and practicality to students. This should ensure a benchmark consistency across campuses and staff in providing feedback that meets student expectations.
- Apply your knowledge in Network Routing to solve problems in wired and wireless networks
- Develop IP addressing plans for organisational networks
- Analyse the application of wireless network technologies in different scenarios
- Compare and contrast the protocols and standards in routing and switching
- Evaluate the complexities involved in transitioning to new technologies such as IPv6.
The Australian Computer Society (ACS), the professional association for Australia's ICT sector, recognises the Skills Framework for the Information Age (SFIA). SFIA is adopted by organisations, governments, and individuals in many countries and provides a widely used and consistent definition of ICT skills. SFIA is increasingly being used when developing job descriptions and role profiles. ACS members can use the tool MySFIA to build a skills profile.
This unit contributes to the following workplace skills as defined by SFIA 8 (the SFIA code is included):
- Systems Design (DESN)
- Systems integration and build (SINT)
- Network Support (NTAS)
- Configuration Management (CFMG).
The National Initiative for Cybersecurity Education (NICE) Framework defines knowledge, skills and tasks needed to perform various cyber security roles. Developed by the National Institute of Standards and Technology (NIST), the NICE Framework is used by organisations to plan their workforce, including recruit into cyber security positions.
This unit helps prepare you for roles such as Systems Security Analyst, Network Operations Specialist and Systems Administrator, contributing to the following knowledge and skills:
- K0001 Knowledge of computer networking concepts and protocols, and network security methodologies.
- K0010 Knowledge of communication methods, principles, and concepts that support the network infrastructure.
- K0011 Knowledge of capabilities and applications of network equipment including routers, switches, bridges, servers, transmission media, and related hardware.
- K0029 Knowledge of organization's Local and Wide Area Network connections.
- K0061 Knowledge of how traffic flows across the network (e.g., Transmission Control Protocol [TCP] and Internet Protocol [IP], Open System Interconnection Model [OSI], Information Technology Infrastructure Library, current version [ITIL]).
- K0108 Knowledge of concepts, terminology, and operations of a wide range of communications media (computer and telephone networks, satellite, fiber, wireless).
- K0111 Knowledge of network tools (e.g., ping, traceroute, nslookup)
- K0113 Knowledge of different types of network communication (e.g., LAN, WAN, MAN, WLAN, WWAN).
- K0136 Knowledge of the capabilities of different electronic communication systems and methods (e.g., e-mail, VOIP, IM, web forums, Direct Video Broadcasts).
- K0138 Knowledge of Wi-Fi.
- K0332 Knowledge of network protocols such as TCP/IP, Dynamic Host Configuration, Domain Name System (DNS), and directory services.
- S0033 Skill in diagnosing connectivity problems.
- S0035 Skill in establishing a routing schema.
- S0041 Skill in installing, configuring, and troubleshooting LAN and WAN components such as routers, hubs, and switches.
- S0162 Skill in applying various subnet techniques (e.g., CIDR)
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Written Assessment - 20% | |||||
| 2 - Written Assessment - 30% | |||||
| 3 - In-class Test(s) - 50% | |||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Knowledge | |||||
| 2 - Communication | |||||
| 3 - Cognitive, technical and creative skills | |||||
| 4 - Research | |||||
| 5 - Self-management | |||||
| 6 - Ethical and Professional Responsibility | |||||
| 7 - Leadership | |||||
| 8 - Aboriginal and Torres Strait Islander Cultures | |||||
Textbooks
Data Comms And Networking With Tcp/Ip Protocol Suite
Edition: 6th (2021)
Authors: Forouzan, B
McGraw Hill
New York New York , NY , USA
ISBN: 9781260597820
None
None
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Cisco Packet Tracer
- Wireshark - Network Protocol Analyser
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
m.hossain@cqu.edu.au
Module/Topic
- Unit Introduction
- TCP/IP Protocol Suite
- Numbering Systems
Chapter
Chapter 1 & Appendix B
Events and Submissions/Topic
Module/Topic
- Introduction to the Transport Layer
- User Datagram Protocol (UDP)
Chapter
Chapter 9
Events and Submissions/Topic
Module/Topic
- Transmission Control Protocol (TCP)
Chapter
Chapter 9
Events and Submissions/Topic
Module/Topic
- Introduction to the Network Layer
- IPv4 Addresses Part I
Chapter
Chapter 7
Events and Submissions/Topic
Module/Topic
- IPv4 Addresses Part II
Chapter
Chapter 7
Events and Submissions/Topic
Module/Topic
- Delivery and Forwarding of IP Packets
- Address Resolution Protocol (ARP)
Chapter
Chapter 7
Events and Submissions/Topic
Assessment #1 is due on Friday, 13 December
WRITTEN ASSESSMENT 1: IP NETWORKING Due: Week 6 Friday (13 Dec 2024) 11:45 pm AEST
WRITTEN ASSESSMENT 1: IP NETWORKING Due: Week 6 Friday (13 Dec 2024) 11:45 pm AEST
Module/Topic
- Internet Protocol Version 4 (IPv4)
- Internet Control Message Protocol (ICMP)
Chapter
Chapter 7
Events and Submissions/Topic
Module/Topic
Enjoy the break!
Chapter
Events and Submissions/Topic
Module/Topic
- Unicast Routing Protocols (RIP, OSPF, and BGP)
Chapter
Chapter 8
Events and Submissions/Topic
Module/Topic
- IPv6 Addressing
- IPv6 Protocol
- Routing in IPv6
- ICMPv6
Chapter
Chapter 7
Events and Submissions/Topic
Module/Topic
- Routing in Wireless Networks
Chapter
Chapter 4 discusses basic WiFi
The lecture will discuss wireless routing protocols using other sources
Events and Submissions/Topic
Assessment #2 is due on Friday, 24 January
WRITTEN ASSESSMENT 2: ROUTING AND SWITCHING Due: Week 10 Friday (24 Jan 2025) 11:45 pm AEST
WRITTEN ASSESSMENT 2: ROUTING AND SWITCHING Due: Week 10 Friday (24 Jan 2025) 11:45 pm AEST
Module/Topic
- Host Configuration: DHCP
- Domain Name System (DNS)
Chapter
Chapter 10 discusses DNS.
Lecture will discuss DHCP using other sources
Events and Submissions/Topic
Module/Topic
- Switching in LANs and WANs
- Multi-Protocol Label Switching (MPLS)
Chapter
Chapter 7 and online sources
Events and Submissions/Topic
Assessment #3 (online test) is held in the Tutorial session.
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Unit Coordinator: Dr Rahat Hossain
Building 30/1.12, Rockhampton Campus
Email: m.hossain@cqu.edu.au
1 Written Assessment
You must demonstrate your knowledge of IP networking, including IP addressing and subnetting, by completing several exercise questions. There will be multiple questions requiring a mix of numerical and descriptive answers. Exploratory exercises using common networking tools may also be presented. The assessment and further description of the requirements can be found in Moodle. This assignment is an individual assignment, and no group work or submission applies.
Week 6 Friday (13 Dec 2024) 11:45 pm AEST
Your assignment must be submitted in Moodle in the format specified in the assignment. See Moodle unit website for details.
Week 8 Friday (10 Jan 2025)
We aim to return marks and feedback to you by this date.
Your answers will be marked based on technical correctness, completeness, clarity and relevance. Questions that ask you to show your work or calculations or the steps you took to arrive at your answers may have marks deducted if such information is not provided. If a question requires you to submit a graphic (e.g. a screenshot or a diagram), the graphic must have sufficient resolution to show all its details clearly and be of a reasonable size for normal reader viewing, with all or any text within the graphic being legible and readable, to be marked. If a question asks for an explanation or discussion followed by "(essential)", it means that at least 50% of the allocated mark is for the explanation or discussion, and the rest is for the balance of the answer.
- Apply your knowledge in Network Routing to solve problems in wired and wireless networks
- Develop IP addressing plans for organisational networks
2 Written Assessment
You must demonstrate your knowledge of routing and switching in networks by completing several exercise questions. There will be multiple questions requiring a mix of numerical and descriptive answers. Questions that ask you to show your work or calculations or the steps you took to arrive at your answers may have marks deducted if such information is not provided. Some questions may require research on technologies or relevant technology trends not covered in lectures or textbooks. The assessment and detailed description of the requirements can be found in Moodle. This is an individual, not a group assignment.
Week 10 Friday (24 Jan 2025) 11:45 pm AEST
Your assignment must be submitted in the format specified in the assignment. See Moodle unit website for details.
Week 12 Friday (7 Feb 2025)
We aim to return marks and feedback to you by this date.
Your answers will be marked based on technical correctness, completeness, clarity, originality and relevance. Proper use of referencing conventions are expected and marks may be deducted for failure to comply. For discussion or research-based questions, if you decide to submit a graphic (e.g. a screenshot or a diagram) in support of your answer, the graphic must be relevant to your discussion, be appropriately referenced, and must have sufficient resolution to show all its details clearly and be of a reasonable size for normal reader viewing, with any text within the graphic being legible and readable. Originality means the work is your own and is expressed in your own words. An answer is unacceptable if it is composed mostly of quoted material from other sources and may receive no marks as a result.
Questions that ask you to show your work or calculations or the steps you took to arrive at your answers may have marks deducted if such information is not provided. If a question asks for an explanation or discussion followed by "(essential)," it means that at least 50% of the allocated mark is for the explanation or discussion; the rest is for the balance of the answer.
- Analyse the application of wireless network technologies in different scenarios
- Compare and contrast the protocols and standards in routing and switching
- Evaluate the complexities involved in transitioning to new technologies such as IPv6.
3 In-class Test(s)
The final assessment is a supervised in-class test that must be completed in class on campus - student attendance is therefore required. The test consists of 20 questions including a mix of multiple-choice and short answer items drawn from the range of topics studied during the term. The test is time-limited to 2 hours, will be open-book, and will be available during the final tutorial session of the term (Week 12).
The questions may include tests of terms and concepts learned during term, may ask you to solve practical problems relating to routing and switching operations, or could require you to provide an explanation of protocols or functions or networking and routing concepts. The format includes multiple-choice style questions, plus questions requiring you to type in answers in your own words.
Further details will be released in second half of term.
Due date is at the conclusion of your scheduled tutorial session during Week 12
Formal results will become available on Certification Day.
Many answers will be marked automatically by the Quiz. A few are marked by hand.
Answers not marked automatically will be marked based on technical correctness, completeness, clarity, originality and relevance. Originality means the work is your own and is expressed in your own words. An answer is unacceptable if it is composed mostly of quoted material from other sources, and may receive no marks as a result. Use of ChatGPT or any other language-based generative-AI technology is not permitted at any time.
Questions that ask you to show your working or calculations or the steps you took to arrive at your answers, may have marks deducted if such information is not provided. If a question asks for an explanation or discussion followed by "(essential)", it means that at least 50% of the allocated mark is for the explanation or discussion, the rest is for the balance of the answer.
- Apply your knowledge in Network Routing to solve problems in wired and wireless networks
- Develop IP addressing plans for organisational networks
- Analyse the application of wireless network technologies in different scenarios
- Compare and contrast the protocols and standards in routing and switching
- Evaluate the complexities involved in transitioning to new technologies such as IPv6.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
