Overview
This unit is the capstone to the Networks and Information Security specialisation of the Master of Information Technology course. You are required to demonstrate the skills that you have developed throughout your specialisation, and apply these skills to an authentic task group network security project including the design and technology implementation of a network security plan that meets client's requirements. As part of a work portfolio, you will be required to produce project management artefacts typical of a commercial network security project.
Details
Pre-requisites or Co-requisites
Prerequisites COIT20262 Advanced Network Security COIT20263 Information Security Management COIT20264 Network Design PPMP20007 Project Management Concepts
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student unit evaluation.
Students praised the use of individual portfolios to develop their reflective and metacognitive skills.
Prepare some guidelines to help students optimise the creation and development of their portfolios.
Feedback from Student unit evaluation In class.
Some students perceived that the time allocated to the group presentation was not enough.
Increase the time of the group presentation.
- Apply the concepts learned in network security specialisation units informed by research and professional best-practice
- Assess systems for security exposures; and accordingly, select and implement appropriate countermeasures and controls
- Plan and manage a network security project, particularly the prioritisation of tasks, scheduling of time and resources, and the generation of supporting documentation
- Review and critically evaluate team and individual performance, reflecting on the processes followed and identifying areas for continuous improvement
- Communicate effectively by using written and oral presentation, understanding the needs of various stakeholders
- Demonstrate productive participation and contribution to a project team or work environment.
- Project Management (PRMG)
- IT Management (ITMG)
- Information Security (SCTY)
- Security Administration (SCAD)
- IT Governance (GOVN)
- Technical specialism (TECH)
- IT Infrastructure (ITOP)
- Systems Installation/Decommissioning (HSIN)
- Network Support (NTAS)
- Network Planning (NTPL)
- Network Design (NTDS)
- System Design (DESN).
- Penetration testing (PENT)
- Information Assurance (INAS)
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Report - 40% | ||||||
2 - Portfolio - 20% | ||||||
3 - Written Assessment - 20% | ||||||
4 - Presentation - 20% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Knowledge | ||||||
2 - Communication | ||||||
3 - Cognitive, technical and creative skills | ||||||
4 - Research | ||||||
5 - Self-management | ||||||
6 - Ethical and Professional Responsibility | ||||||
7 - Leadership | ||||||
8 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Report - 40% | ||||||||
2 - Portfolio - 20% | ||||||||
3 - Written Assessment - 20% | ||||||||
4 - Presentation - 20% |
Textbooks
There are no required textbooks.
Additional Textbook Information
No textbooks are required.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing styles below:
For further information, see the Assessment Tasks.
e.arenas@cqu.edu.au
Module/Topic
Introduction to project by mentor
Form project groups
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Project selection
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
- Make entries in the Portfolio covering activities performed in this week
- Submit Project Plan
- Submit and present Progress Report-1
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
- Make entries in the Portfolio covering activities performed in this week
- Submit and present Progress Report-2
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
- Make entries in the Portfolio covering activities performed in this week
- Submit and present Progress Report-3
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
- Make entries in the Portfolio covering activities performed in this week
- Submit and present Progress Report-4
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
Make entries in the Portfolio covering activities performed in this week
Module/Topic
Weekly meeting with the project mentor
Chapter
No prescribed textbooks for this unit
Events and Submissions/Topic
- Submit Portfolio
- Submit FINAL Project Report
- Project presentation
Project Report and Technical Implementation Due: Week 12 Friday (5 Oct 2018) 12:00 am AEST
Portfolio Due: Week 12 Friday (5 Oct 2018) 12:00 am AEST
Group Project Presentation Due: Week 12 Friday (5 Oct 2018) 12:00 am AEST
Module/Topic
Chapter
No exam
Events and Submissions/Topic
Module/Topic
Chapter
No exam
Events and Submissions/Topic
Dr Edilson Arenas, PhD
School of Engineering and Technology, Higher Education Division
CQUniversity Australia, 120 Spencer Street, Melbourne, Victoria, 3000, Australia
Phone +61 03 96160570 | Email e.arenas@cqu.edu.au
1 Report
This is a practical activity that requires demonstration of the implementation of your group’s network security plan. You must identify key threats and challenges, and implement technology to address them. The technology has to address key challenges to the organisation’s network environment. You should pick an area of network, infrastructure or security that you have already applied in your studies and that you would like to explore in-depth and implement. You need to show how that was implemented and how the tests were carried. You are also required to submit the technical documentation including a test plan, test results and any network security policies and/or procedures that result from your implementation test.
Week 12 Friday (5 Oct 2018) 12:00 am AEST
On certification day
The project report and technical documentation will be assessed upon the quality of the content. This includes the presentation layout and the depth and breadth of your project recommendations adhering to the implementation of a secured computer network.
Note: Please refer to the unit website in Moodle for further information and detailed marking criteria.
- Apply the concepts learned in network security specialisation units informed by research and professional best-practice
- Assess systems for security exposures; and accordingly, select and implement appropriate countermeasures and controls
- Plan and manage a network security project, particularly the prioritisation of tasks, scheduling of time and resources, and the generation of supporting documentation
- Communicate effectively by using written and oral presentation, understanding the needs of various stakeholders
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Ethical and Professional Responsibility
2 Portfolio
This is an individual task. Use your portfolio to capture things like:
- Activities that you performed during the week
- Your contributions to the overall project requirements
- Challenges faced
- Reflections and experiences in conducting the project
- Bibliography such as technical journals, websites, trade magazines, etc. you used to support your work
Week 12 Friday (5 Oct 2018) 12:00 am AEST
Exam Week Friday (19 Oct 2018)
You are required to submit your portfolio in week 12 for assessment; however, it is essential to maintain this document throughout the term as it is the only component of the unit assessed individually. Failure to submit a portfolio will disadvantage your overall marks. We recommend to make entries in the portfolio on each occasion you undertake work on the project for personal reflections and lessons learned. You are expected to make a portfolio entry at least once a week.
The Moodle site provides further information and specific marking criteria.
- Review and critically evaluate team and individual performance, reflecting on the processes followed and identifying areas for continuous improvement
- Demonstrate productive participation and contribution to a project team or work environment.
- Communication
- Cognitive, technical and creative skills
- Self-management
- Ethical and Professional Responsibility
3 Written Assessment
This group assessment comprises two items:
- Project Plan due in week 4
- Four progress reports due in weeks 4, 6, 8, and 10
See exact dates in Moodle
Assessment returned two weeks after submission. See exact dates in Moodle
Project plan (12 marks)
Due: Friday, Week 4
You are required to submit a project plan outlining the project scope, objectives, constraints, statement of work, project team members, RACI matrix, GANTT Chart, project risks, and proposed mitigation plan.
Periodic Project Progress Reports (four reports @ 2 marks each for a total of 8 marks)
Due: Fridays, Week 4, 6, 8, and 10
This is a group assessment.
Each group must submit four periodic project progress reports using a standard template provided on the unit website in Moodle.
On-campus students: Each member of your group MUST give an in-class presentation of each project progress report.
Distant or Flexible students: The Unit Coordinator will provide you necessary instructions to present your group's periodic progress reports.
- Apply the concepts learned in network security specialisation units informed by research and professional best-practice
- Assess systems for security exposures; and accordingly, select and implement appropriate countermeasures and controls
- Plan and manage a network security project, particularly the prioritisation of tasks, scheduling of time and resources, and the generation of supporting documentation
- Review and critically evaluate team and individual performance, reflecting on the processes followed and identifying areas for continuous improvement
- Communication
- Research
- Self-management
- Leadership
4 Presentation
Each group must present their project in plenary session in week 12 of the term
Week 12 Friday (5 Oct 2018) 12:00 am AEST
Exam Week Friday (19 Oct 2018)
Each member of the group must submit their group’s PowerPoint slide through the appropriate link in Moodle. Please refer to the unit website in Moodle for detailed information about the presentation session and marking criteria.
On-campus students: The date and time of this presentation will be determined by your local lecturer/tutor.
Distant students: The time of the presentation and technology employed will be determined on an individual basis.
- Communicate effectively by using written and oral presentation, understanding the needs of various stakeholders
- Demonstrate productive participation and contribution to a project team or work environment.
- Communication
- Cognitive, technical and creative skills
- Self-management
- Leadership
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.