Overview
This unit focuses on the development of the requisite skills for cabinet making. Through practical workshops, you will apply the knowledge and skills of cabinet making necessary to teach Industrial Technology and Design in the senior years of schooling (10 - 12). You will design, develop, create, adapt and evaluate projects utilising critical aspects of knowledge of the industrial design processes for cabinet making.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Residential Schools
This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from students
Although there was info on trimmers & plunge routers, there was nothing on table routers or CNC trimmers, which local schools in our area have, and are very relevant in the furnishing industry.
Provide more information and content
- Plan and develop a series of design based activities for construction.
- Understand the use, development and impact of design concepts through the construction of a series of design based activities.
- Apply appropriate problem solving procedures to enact the construction of a designed product.
- Investigate how to plan, sequence, implement and assess design application processes used in the production of projects incorporated in the senior year's of industrial technology and design teaching area.
- Recognise and apply basic skills sequences and procedures using design processes required for teaching cabinet making technologies.
- Critically evaluate specific applications of tools and equipment used in the manufacture of products for cabinet making.
- Apply appropriate workplace health and safety and maintenance practices when engaging in design and manufacturing activities.
- Communicate and work professionally in peer learning teams.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Portfolio - 50% | ||||||||
2 - Practical Assessment - 50% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Communication | ||||||||
2 - Problem Solving | ||||||||
3 - Critical Thinking | ||||||||
4 - Information Literacy | ||||||||
5 - Team Work | ||||||||
6 - Information Technology Competence | ||||||||
7 - Cross Cultural Competence | ||||||||
8 - Ethical practice | ||||||||
9 - Social Innovation | ||||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Portfolio - 50% | ||||||||||
2 - Practical Assessment - 50% |
Textbooks
Furnishing: An Industry Study
Edition: 4th edn (2014)
Authors: Baker, S & Schlyder, D
PCS Publications
Toowoomba Toowoomba , Queensland , Australia
ISBN: 9781876135874
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: American Psychological Association 6th Edition (APA 6th edition)
For further information, see the Assessment Tasks.
b.connolly@cqu.edu.au
Module/Topic
Early development of the furnishing industry in Australia and the structure of
Australia's Furnishing Industry
Chapter
Reading: Furnishing: An Industry Study pp.1-12
Events and Submissions/Topic
Quiz 2%
Module/Topic
Safe Working polices& practices in the Furnishing Industry.
Chapter
Readings: Furnishing: An Industry Study pp.29-63
Events and Submissions/Topic
Quiz 2%
Module/Topic
Safe Identifying hand tools and hand tool safety.
Chapter
Readings: Furnishing: An Industry Study pp.76-89
Events and Submissions/Topic
Quiz 2%
Module/Topic
Portable power tools.
Chapter
Readings: Furnishing: An Industry Study pp.90-112
Events and Submissions/Topic
Quiz 2%
Module/Topic
Basic woodworking machines.
Chapter
Readings: Furnishing: An Industry Study pp.113-140
Events and Submissions/Topic
Quiz 2%
Module/Topic
Enjoy your break.
Chapter
Events and Submissions/Topic
Module/Topic
Materials. (timber, wood products, adhesives, hardware items, glass, plastics and surface finishes).
Chapter
Readings: Furnishing: An Industry Study pp.141-185
Events and Submissions/Topic
Quiz 2%
Module/Topic
Different ways timber can be join using a range of joints and how to construct the
joints.
Chapter
Readings: Furnishing: An Industry Study pp.171-185
Events and Submissions/Topic
Quiz 2%
Module/Topic
Surface preparation, identifying and rectifying defects, selecting and applying stoppings and selecting suitable abrasive paper and using correct sanding methods.
Chapter
Readings: Furnishing: An Industry Study pp.76-89
Events and Submissions/Topic
Quiz 2%
Module/Topic
Revision Part A.
Chapter
Revisit past readings: Furnishing: An Industry Study.
Events and Submissions/Topic
Quiz 2%
Module/Topic
Revision Part B.
Chapter
Revisit past readings:Furnishing: An Industry Study.
Events and Submissions/Topic
Quiz 2%
Module/Topic
Review readings and complete Assignment 1B.
Chapter
Events and Submissions/Topic
Module/Topic
Assignment 1B due 01/06/2018
Chapter
Events and Submissions/Topic
Portfolio Due Friday (01 Jun 18) 05:00 PM AEST
Assessment 1A and 1B Due: Week 12 Friday (1 June 2018) 5:00 pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Compulsory Residential School 09/07/18 to 11/07/18 if needed 12/07/18 to 14/07/18 at CQUniversity Rockhampton City Campus.
Chapter
The central aim of this course is to provide an understanding of design principles and their application towards problem solving pedagogy in a technology context, whether that be in a theory classroom or workshop. Further development of students hand skills.
Events and Submissions/Topic
1 Portfolio
Assessment Item 1 A
10 Multi-Choice Quizzes: 20% total marks Quizzes will be based on weekly readings from the assigned text book. Quizzes will be available on the Moodle website each Monday and remain open until the following Monday at midnight. Students will be allowed a maximum of 1 hour and two attempts to complete each quiz. The highest scoring attempt will be used for grading. Please note that results from all 10 quizzes contribute to the overall mark of 20%
Assessment Item 1B
Written Assignment: Unit Plan due: 01/06/18 30% total marks
Students are required to develop a Unit Plan and Project suitable for either a Year 11 or Year 12 Furnishing class. The assignment will consist of a Unit Plan that has a: Rationale for the Project, what Year Level the Project is targeting, an accurate Dimensioned Working Drawing of the Project, a Detailed Work Procedure, Lesson Plans for the duration of the Project and a Criteria Sheet. An example of a suitable unit plan has been made available under the Resources Tab on the Moodle Website.
Week 12 Friday (1 June 2018) 5:00 pm AEST
Assessment will be returned after moderation and grade cerification
Students are assessed on the following criteria:
- Ability to present graphical information
- Ability to express and develop an idea
- Ability to present work effectively
- Plan and develop a series of design based activities for construction.
- Understand the use, development and impact of design concepts through the construction of a series of design based activities.
- Apply appropriate problem solving procedures to enact the construction of a designed product.
- Investigate how to plan, sequence, implement and assess design application processes used in the production of projects incorporated in the senior year's of industrial technology and design teaching area.
- Recognise and apply basic skills sequences and procedures using design processes required for teaching cabinet making technologies.
- Critically evaluate specific applications of tools and equipment used in the manufacture of products for cabinet making.
- Apply appropriate workplace health and safety and maintenance practices when engaging in design and manufacturing activities.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
2 Practical Assessment
Practical Assessment: Compulsory Residential School Residential school introduces students to learning experiences and projects which target Engineering. Students will be using hand tools, machinery and equipment.Residential School gives students the opportunity to develop their hand skills, knowledge & understanding of workshop procedures and processes. Students will be assessed on the quality and presentation of their projects, in addition to their knowledge and understanding and application of workshop processes, and their ability to work independently with limited assistance.
Compulsory Residential School 09/07/18 - 11/07/18 if needed 12/07/18 - 14/07/18
Results to be returned by end Compulsory Residential School
Students will be assessed over the Res School in relation to the following:
- Practical expertise
- Quality and presentation of their projects
- Knowledge and understanding and application of workshop processes
- ability to work independently with limited assistance
No submission method provided.
- Plan and develop a series of design based activities for construction.
- Understand the use, development and impact of design concepts through the construction of a series of design based activities.
- Apply appropriate problem solving procedures to enact the construction of a designed product.
- Investigate how to plan, sequence, implement and assess design application processes used in the production of projects incorporated in the senior year's of industrial technology and design teaching area.
- Recognise and apply basic skills sequences and procedures using design processes required for teaching cabinet making technologies.
- Critically evaluate specific applications of tools and equipment used in the manufacture of products for cabinet making.
- Apply appropriate workplace health and safety and maintenance practices when engaging in design and manufacturing activities.
- Communicate and work professionally in peer learning teams.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.