CQUniversity Unit Profile
ENEC12010 Hydraulics and Hydrology
Hydraulics and Hydrology
All details in this unit profile for ENEC12010 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

In this unit, you will be introduced to the basic principles of hydraulics and hydrology used in civil and environmental engineering. You will apply the concepts of conservation of mass, momentum, and energy. You are also introduced to flow measurements, physical modeling of hydraulic systems, and pump selection to suit given applications. You will solve problems, prepare basic designs, and describe the construction and maintenance of pipes and open channel systems. You will learn about monitoring and analysis of the basic components of the hydrologic cycle. You will also use HEC-RAS or equivalent software to create a digital twin of a hydraulic system, and validate your model's output by participating in a remote design studio. In completing these tasks, you must use appropriate technical language in written communication and work individually and in teams to solve problems.

Details

Career Level: Undergraduate
Unit Level: Level 2
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Prerequisite: MATH11218 Applied Mathematics or MATH11160 Technology MathematicsPrerequisite or Corequisite: ENEG11006 Engineering Statics

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 1 - 2023

Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Online Test
Weighting: 30%
2. Written Assessment
Weighting: 35%
3. Written Assessment
Weighting: 35%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from Moodle

Feedback

Exam

Recommendation

The value of the formal exam will be reviewed and its suitable alternative will be explored.

Feedback from Self

Feedback

Laboratory experiments

Recommendation

A digital twin of the laboratory experiments was incorporated into the practical experiments in the last term. The exercise will be integrated more with the other learning contents.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Apply standard techniques, computational tools, and data used by engineers in conducting hydraulics analysis
  2. Solve problems involving combinations of basic hydraulic systems including pipes, pumps, and open channels
  3. Explain the key components of the hydrologic cycle and how they are monitored and analysed
  4. Estimate runoff from rainfall and create design hydrographs
  5. Work autonomously and in teams to develop numerical models, validate them with lab experimental data and apply the models to solve engineering problems.

The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:

Introductory
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 1N 2N 3N 4N)
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 1N 2N 3N 4N)
1.6 Understanding of the scope, principles, norms, accountabilities, and bounds of sustainable engineering practice in the specific discipline. (LO: 3N)
3.6 Effective team membership and team leadership. (LO: 5N)
Intermediate
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 1N 2N 3I 4N)
1.5 Knowledge of engineering design practice and contextual factors impacting the engineering discipline. (LO: 3I)
2.1 Application of established engineering methods to complex engineering problem-solving. (LO: 1I 2I 3I 4N)
2.2 Fluent application of engineering techniques, tools, and resources. (LO: 1I)
2.3 Application of systematic engineering synthesis and design processes. (LO: 1I)
3.2 Effective oral and written communication in professional and lay domains. (LO: 5I)
3.4 Professional use and management of information. (LO: 5I)

Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate, and A - Advanced.
Refer to the Engineering Undergraduate Course Moodle site for further information on Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course-level mapping information https://moodle.cqu.edu.au/course/view.php?id=1511

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Online Test - 30%
2 - Written Assessment - 35%
3 - Written Assessment - 35%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures
Textbooks and Resources

Textbooks

Prescribed

UNDERSTANDING HYDRAULICS

Third Edition (2011)
Authors: Les Hamill
Palgrave Macmillan UK - Academic
ISBN: 978-0-230-24275-3
Binding: Other

Additional Textbook Information

The prescribed textbook can be accessed online at the CQUniversity Library website. Access may be limited. If you would prefer your own copy, purchase either paper or eBook versions at the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code)

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
  • EPANET Software
  • HECRAS software
Referencing Style

All submissions for this unit must use the referencing style: Harvard (author-date)

For further information, see the Assessment Tasks.

Teaching Contacts
Raj Sharma Unit Coordinator
r.sharma@cqu.edu.au
Schedule
Week 1 Begin Date: 06 Mar 2023

Module/Topic

Hydrological cycle

Chapter

Chapter 12 and ARR 2019

Events and Submissions/Topic

Week 2 Begin Date: 13 Mar 2023

Module/Topic

Estimation of Hydrological Parameters

Chapter

Chapter 12 and ARR 2019

Events and Submissions/Topic

Week 3 Begin Date: 20 Mar 2023

Module/Topic

Temporal pattern of rainfall and losses

Chapter

Chapter 12 and ARR 2019

Events and Submissions/Topic


Week 4 Begin Date: 27 Mar 2023

Module/Topic

Rainfall to runoff

Chapter

Chapter 13 and ARR 2019

Events and Submissions/Topic


Week 5 Begin Date: 03 Apr 2023

Module/Topic

Assignment I- Application of ARR 2019

Chapter

Application of ARR 2019

Events and Submissions/Topic

Online Test A


Application of Engineering Hydrology Due: Week 5 Wednesday (5 Apr 2023) 11:45 pm AEST
Vacation Week Begin Date: 10 Apr 2023

Module/Topic

Chapter

Events and Submissions/Topic


Week 6 Begin Date: 17 Apr 2023

Module/Topic

Hydrostatics

Chapter

Chapter 1

Events and Submissions/Topic


Week 7 Begin Date: 24 Apr 2023

Module/Topic

Fluid in motion        

Chapter

Chapter 4

Events and Submissions/Topic


Week 8 Begin Date: 01 May 2023

Module/Topic

Flow through a single pipeline

Chapter

Chapter 6

Events and Submissions/Topic


Week 9 Begin Date: 08 May 2023

Module/Topic

Flow through a pipe network

Chapter

Chapter 6 

Events and Submissions/Topic


Week 10 Begin Date: 15 May 2023

Module/Topic

Open Channel flow

Chapter

Chapter 8

Events and Submissions/Topic

Week 11 Begin Date: 22 May 2023

Module/Topic

Open Channel Flow 

Chapter

Chapters 8 and 9.4

Events and Submissions/Topic

Online Test B

Week 12 Begin Date: 29 May 2023

Module/Topic

Project Report

Chapter

Events and Submissions/Topic

Numerical simulations and Physical Experiments of Hydraulic Problems Due: Week 12 Friday (2 June 2023) 11:45 pm AEST
Review/Exam Week Begin Date: 05 Jun 2023

Module/Topic

Chapter

Events and Submissions/Topic


Exam Week Begin Date: 12 Jun 2023

Module/Topic

Chapter

Events and Submissions/Topic

Assessment Tasks

1 Online Test

Assessment Title
Online Test

Task Description

This assessment task consists of one Online Test with two parts. The main characteristics of the Online Test are:

  1. There will be two parts of the online test: Part A and Part B.
  2. Parts A and B of the test cover the contents of weeks 1-4 and 5-10, respectively.
  3. You will have 120 minutes from when you start your attempt to submit your answers.
  4. You will be allowed to attempt each part of the test two times within a given time frame. The highest of the two attempts will be your final score for the part of the test.
  5. There shall be a minimum of two hours between the two attempts.
  6. Each part will have 15 numerical-type questions, each carrying one mark. Questions may vary from student to student and may change with different attempts.
  7. Each part will contribute 15% towards your final grade. (Part A 15% + Part B 15 % = 30% from Online Test).
  8. You must get a combined 15/30 from parts A and B to pass this assessment. 


Assessment Due Date

Part A will be open from 09:00am AEST Monday to 05:00 pm AEST Friday of the Week 5. Part B will be open from 09:00am AEST Monday to 05:00 pm AEST Friday of the Week 11.


Return Date to Students

Marks will be available immediately after the end of the tests.


Weighting
30%

Minimum mark or grade
Combined minimum 50% from tests A and B.

Assessment Criteria

Answers will be automatically marked correct or incorrect. 


Referencing Style

Submission
Online

Learning Outcomes Assessed
  • Apply standard techniques, computational tools, and data used by engineers in conducting hydraulics analysis
  • Solve problems involving combinations of basic hydraulic systems including pipes, pumps, and open channels
  • Explain the key components of the hydrologic cycle and how they are monitored and analysed
  • Estimate runoff from rainfall and create design hydrographs

2 Written Assessment

Assessment Title
Application of Engineering Hydrology

Task Description

Design hydrographs are widely used to solve engineering applications such as the design of hydraulic structures, flood control measures and flood risk mapping. You will use ARR 2019 to create the design hydrograph for a given location. 


Assessment Due Date

Week 5 Wednesday (5 Apr 2023) 11:45 pm AEST


Return Date to Students

After 14 days of the submission.


Weighting
35%

Minimum mark or grade
50%

Assessment Criteria

Assessment will be marked based on a) understanding of the problem, b) use of the correct approach, c) accuracy of results, d) presentation of results and e) communication.


Referencing Style

Submission
Online

Learning Outcomes Assessed
  • Explain the key components of the hydrologic cycle and how they are monitored and analysed
  • Estimate runoff from rainfall and create design hydrographs
  • Work autonomously and in teams to develop numerical models, validate them with lab experimental data and apply the models to solve engineering problems.

3 Written Assessment

Assessment Title
Numerical simulations and Physical Experiments of Hydraulic Problems

Task Description

Most of the hydrology and hydraulics problems are too complex to be solved manually so different software is used. For this assignment, you will use EPANET and HECRAS software to solve given hydraulics problems and verify the results with the experimental results. 



Assessment Due Date

Week 12 Friday (2 June 2023) 11:45 pm AEST


Return Date to Students

After the certification of grades


Weighting
35%

Minimum mark or grade
50%

Assessment Criteria

Assessment will be marked based on a) understanding of the problem, b) use of the correct approach, c) accuracy of results, d) presentation of results e) communication and f) teamwork.


Referencing Style

Submission
Online

Learning Outcomes Assessed
  • Apply standard techniques, computational tools, and data used by engineers in conducting hydraulics analysis
  • Solve problems involving combinations of basic hydraulic systems including pipes, pumps, and open channels
  • Work autonomously and in teams to develop numerical models, validate them with lab experimental data and apply the models to solve engineering problems.

Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?