Overview
This unit introduces the design of roads and associated documentation. You are introduced to traffic analysis, safety, efficiency, environmental and cultural issues and sustainability of road design. You will analyse traffic survey data and interpret survey results, applying them to analysis of traffic flows and estimation of system capacity. You also apply design codes and manuals to common design problems involving geometric design of roads, road drainage, intersection design and pavement design and rehabilitation. You also collaborate with your team members to prepare plans, compile specifications and estimate quantities and costs.
Details
Pre-requisites or Co-requisites
Prerequisites: [ENEC12009 Engineering Surveying OR ENAR12005 Surveying and Mapping] AND [MATH11218 Applied Mathematics OR MATH11160 Technology Mathematics]
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student Unit Evaluation
Industry based software learning was acknowledged as the best aspect of the unit.
Continue to implement hands on demonstrations with suitable exercise on the Industry based software such as AutoCAD Civil 3D and CIRCLY.
Feedback from Student Unit Evaluation
Civil 3D activities were flagged for improvement. Suggestion include an introduction of the software in the first year.
A strategy will be implemented by the lecturer to provide more customised video recordings.
Feedback from Student Unit Evaluation
The requirements of the assessment grading criteria was not clear.
A strategy will be implemented by the lecturer to provide more clarity for grading criteria.
- Organise and conduct traffic surveys, analyse collected data and interpret the results
- Apply standard techniques to forecasting future traffic demand
- Design and document geometric alignments of transportation infrastructure using appropriate Australian guidelines
- Evaluate the pavement sublayer materials properties using appropriate Australian guidelines
- Design a basic road pavements using appropriate Australian guidelines
- Demonstrate a professional level of communication
The learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Written Assessment - 30% | ||||||
| 2 - Written Assessment - 40% | ||||||
| 3 - Written Assessment - 30% | ||||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Communication | ||||||
| 2 - Problem Solving | ||||||
| 3 - Critical Thinking | ||||||
| 4 - Information Literacy | ||||||
| 5 - Team Work | ||||||
| 6 - Information Technology Competence | ||||||
| 7 - Cross Cultural Competence | ||||||
| 8 - Ethical practice | ||||||
| 9 - Social Innovation | ||||||
| 10 - Aboriginal and Torres Strait Islander Cultures | ||||||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| 1 - Written Assessment - 30% | ||||||||||
| 2 - Written Assessment - 40% | ||||||||||
| 3 - Written Assessment - 30% | ||||||||||
Textbooks
Mastering AutoCAD Civil 3D: Autodesk Official Press: 2016
(2015)
Authors: Davenport & Voiculescu
John Wiley and Sons
Hoboken Hoboken , NJ , USA
ISBN: 9781119059745
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- AutoCAD Civil 3D
- Pavement Design Software CIRCLY
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
j.egwurube@cqu.edu.au
Module/Topic
Introduction to Traffic Studies
Chapter
- AGTM03-17 Chapter 2
- Garber & Hoel Chapter 4
Events and Submissions/Topic
Module/Topic
Traffic Data Analysis
Chapter
- AGTM03-17 Chapter 2
- Garber & Hoel Chapter 4
Events and Submissions/Topic
Module/Topic
Travel Demand Forecasting
Chapter
Garber & Hoel Chapter 12
Events and Submissions/Topic
Module/Topic
AutoCAD Civil 3D
Chapter
Civil 3D Chapter 1
Events and Submissions/Topic
Module/Topic
Geometric Design 1: Design Objectives
Chapter
AGRD03-16 Chapter 2
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Geometric Design 2: Sight Distances
Chapter
- AGRD03-16 Chapter 5
- Garber & Hoel Chapter 3
Events and Submissions/Topic
Module/Topic
Geometric Design 3: Horizontal Alignment
Chapter
- AGRD03-16 Chapter 7
- Civil 3D Chapter 6
- Garber & Hoel Chapter 15
Events and Submissions/Topic
Module/Topic
Geometric Design 4: Vertical Alignment and earthwork
Chapter
- AGRD03-16 Chapter 8
- Civil 3D Chapter 7
- Garber & Hoel Chapter 15
Events and Submissions/Topic
Module/Topic
Pavement Materials
Chapter
- AGPT02-17 Chapter 6
- TMR Supplement Guide Chapter 6
Events and Submissions/Topic
Module/Topic
Pavement design Traffic
Chapter
- AGPT02-17 Chapter 7
- TMR Supplement Guide Chapter 7
Events and Submissions/Topic
Module/Topic
Empirical Pavement Design
Chapter
- AGPT02-17 Chapter 8
- TMR Supplement Guide Chapter 8
Events and Submissions/Topic
Module/Topic
Pavement design Software CIRCLY
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Obtain your free 3 years AutoCAD Civil 3D 2017 via https://www.autodesk.com/education/free-software/autocad-civil-3d
- Answer Moodle quiz in the relevant modules.
Communication with Lecturer
- All course related questions must be asked through appropriate forums or during the scheduled class time.
- No email will be responded for any quarries related to this course unless those are private in circumstances.
- All emails related to this course should have the course code (ENEC14016) in the subject line. Any email without course code in the subject line may not be responded.
Example: ENEC12011: Quiz
Additional details are provided in the Moodle course site
1 Written Assessment
The aim of this assessment is to allow the students to demonstrate their understanding of various concepts, theories and processes developed in Traffic Engineering topics covered in the course.
This assessment (30% of the total unit marks) has two components
- Individual Assignment (15%)
- Online Quiz (15%)
Individual Assignment
- This is an assignment type where students are required to organised and conduct a traffic survey.
- The brief detail requirements will be made available on the unit's Moodle website in week 1.
- The survey fundamentals will cover topics of Weeks 1-3.
Online Test
This assessment task consists of one online Test (Quizzes) covering topics of Weeks 1-3. The main characteristics of the online Test are:
- You are allowed to attempt the test only two times within a given time frame as specified in the unit Schedule on Moodle;
- There will be between 10 and 20 Numerical questions;
- Questions will be randomly generated
-
You are allowed a maximum of two attempts.
-
The score will be the average grade from the number of attempts
- You have 90 minutes from when you start your attempt to submit your answers.
- Feedback is immediate regarding whether your answer is correct or incorrect but no detailed information on the process is given
Week 5 Friday (10 Aug 2018) 5:00 pm AEST
Week 7 Monday (27 Aug 2018)
Each main steps in task will be assessed separately for the criterion accuracy and correct results.
- Correct application of mathematics and arithmetic
- Reference to correct Standards and/or principles
- Answers clearly identified
- Correct results
In addition, the assignment as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in analysis are present in correct order
- Clear presentation of mathematical and arithmetical working linking given details of the problem to the results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of choices made in the analysis (why is procedure required, why this particular procedure)
- Interpretation of results, eg limitations, direction of vectors
Professional presentation
- The work (job) is clearly identified (problem, date, analysis)
- Clear statement of each problem and its details and requirements
- Logical layout of analysis
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results.
- Organise and conduct traffic surveys, analyse collected data and interpret the results
- Apply standard techniques to forecasting future traffic demand
- Demonstrate a professional level of communication
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
2 Written Assessment
The aim of this assessment is to allow the students to demonstrate their understanding of various concepts, theories and processes developed in Traffic systems topics covered in the course.
This assessment (40% of the total unit marks) has two components
- Individual Design task (25%)
- Online Quiz (15%)
Individual Assignment
- This is a design task to allow students demonstrate their understanding of geometric design principles in accordance to Australian standard.
- A Project Brief detailing the requirements will be made available on the unit's Moodle website in week 3.
Online Test
This assessment task consists of one online Test (Quizzes) covering topics of Weeks 4-8. The main characteristics of the online Test are:
- You are allowed to attempt the test only two times within a given time frame as specified in the unit Schedule on Moodle;
- There will be between 10 and 20 Numerical questions;
- Questions will be randomly generated
-
You are allowed a maximum of two attempts.
-
The score will be the average grade from the number of attempts
- You have 90 minutes from when you start your attempt to submit your answers.
- Feedback is immediate regarding whether your answer is correct or incorrect but no detailed information on the process is given
Week 9 Friday (14 Sept 2018) 5:00 pm AEST
After 10 working days
Each main steps in task will be assessed separately for the criterion accuracy and correct results.
- Correct application of mathematics and arithmetic
- Reference to correct Standards and/or principles
- Answers clearly identified
- Correct results
In addition, the assignment as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in analysis are present in correct order
- Clear presentation of mathematical and arithmetical working linking given details of the problem to the results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of choices made in the analysis (why is procedure required, why this particular procedure)
- Interpretation of results, eg limitations, direction of vectors
Professional presentation
- The work (job) is clearly identified (problem, date, analysis)
- Clear statement of each problem and its details and requirements
- Logical layout of analysis
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results.
- Apply standard techniques to forecasting future traffic demand
- Design and document geometric alignments of transportation infrastructure using appropriate Australian guidelines
- Demonstrate a professional level of communication
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
3 Written Assessment
The aim of this assessment is to allow the students to demonstrate their understanding of various concepts, theories and processes developed in Traffic systems topics covered in the course.
This assessment (30% of the total unit marks) has two components
- Individual Design task (15%)
- Online Quiz (15%)
Individual Assignment
- This is a design task to allow students demonstrate their understanding of pavement design in accordance to Australian standard.
- A Project Brief detailing the requirements will be made available on the unit's Moodle website in week 6.
Online Test
This assessment task consists of one online Test (Quizzes) covering topics of Weeks 9-12. The main characteristics of the online Test are:
- You are allowed to attempt the test only two times within a given time frame as specified in the unit Schedule on Moodle;
- There will be between 10 and 20 Numerical questions;
- Questions will be randomly generated
-
You are allowed a maximum of two attempts.
-
The score will be the average grade from the number of attempts
- You have 90 minutes from when you start your attempt to submit your answers.
- Feedback is immediate regarding whether your answer is correct or incorrect but no detailed information on the process is given.
Review/Exam Week Wednesday (10 Oct 2018) 5:00 pm AEST
After 10 working days
Each main steps in task will be assessed separately for the criterion accuracy and correct results.
- Correct application of mathematics and arithmetic
- Reference to correct Standards and/or principles
- Answers clearly identified
- Correct results
In addition, the assignment as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in analysis are present in correct order
- Clear presentation of mathematical and arithmetical working linking given details of the problem to the results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of choices made in the analysis (why is procedure required, why this particular procedure)
- Interpretation of results, eg limitations, direction of vectors
Professional presentation
- The work (job) is clearly identified (problem, date, analysis)
- Clear statement of each problem and its details and requirements
- Logical layout of analysis
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results.
- Evaluate the pavement sublayer materials properties using appropriate Australian guidelines
- Design a basic road pavements using appropriate Australian guidelines
- Demonstrate a professional level of communication
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
