Overview
In this unit you will develop skills to analyse the stresses in a structural member subjected to various actions such as axial force, torsion, bending moments and shear force using the principles of mechanics of materials. You will learn how individual structural members resist and transfer the stresses as well as ways in which they can fail. You will document the process of modelling, testing and analysis and communicate, work and learn, both individually and in teams in a professional manner. Students enrolled in distance mode are required to attend a compulsory Residential School.
Details
Pre-requisites or Co-requisites
Prerequisites: [ENEG11006 Engineering Statics OR ENEC12007 Analysis of Structures] AND [MATH11219 Engineering Mathematics] AND [ENEG11008 Materials for Engineers OR ENEG12005 Materials Science and Engineering]
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 3 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Residential Schools
This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Moodle
The lecturer was helpful and willing to help. Study resources (tutorial recordings, solution files) are helpful.
This practice will continue in the next offer.
Feedback from Moodle
Delay in Assignment return.
Every effort will be taken to return the assessments within 14 days.
Feedback from Moodle
Assessment feedback needs improvement.
A full solution of the assessment was provided to all students and each question was discussed during the tutorial class (just after the return of assignments). Students are encouraged to attend the classes/watch the video and use the online forum to clarify their questions.
Feedback from Moodle/Observation
Students engagement is low.
The low student engagement also attributes to low pass-rate and students' satisfaction. In order to address this issue a number actions are proposed: 1. Change of assessment items - more progress assessment and supervised assessment. 2. Modify the unit delivery - more tutorial time with pre-recorded lectures.
- Apply the principles and theories of mechanics of materials to the analysis of structural members
- Determine sectional properties, stresses and deflections of structural members
- Analyse structural members subjected to combined axial force, torsion, bending moment and shear force
- Determine principal stresses and discuss failure criteria for a range of engineering materials
- Demonstrate a professional level of communication and team work
The learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Written Assessment - 20% | |||||
2 - Written Assessment - 20% | |||||
3 - Practical and Written Assessment - 10% | |||||
4 - Examination - 50% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Communication | |||||
2 - Problem Solving | |||||
3 - Critical Thinking | |||||
4 - Information Literacy | |||||
5 - Team Work | |||||
6 - Information Technology Competence | |||||
7 - Cross Cultural Competence | |||||
8 - Ethical practice | |||||
9 - Social Innovation | |||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Written Assessment - 20% | ||||||||||
2 - Written Assessment - 20% | ||||||||||
3 - Practical and Written Assessment - 10% | ||||||||||
4 - Examination - 50% |
Textbooks
MECHANICS OF MATERIALS
7th Edition (SI Units) (2015)
Authors: Ferdinand P. Beer, E. Russell Johnston, Jr., John T. DeWolf, David Mazurek
Mc Graw Hill Education
New York New York , NY , USA
ISBN: 9789814595247
Binding: Hardcover
Additional Textbook Information
No
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
h.baji@cqu.edu.au
Module/Topic
Concept of Stress
Mechanical Properties of Materials
Chapter
Chapters 1 and 2
Events and Submissions/Topic
Module/Topic
Axial Loading
Chapter
Chapter 2
Events and Submissions/Topic
Module/Topic
Torsion
Chapter
Chapter 3
Events and Submissions/Topic
Module/Topic
Analysis of Beams Subjected to Bending (BMD and SFD)
Chapter
Chapter 5
Events and Submissions/Topic
Module/Topic
Mid-term Break
Chapter
Events and Submissions/Topic
Module/Topic
Pure Bending I: Simple Bending
Chapter
Sections 4.1 to 4.5
Events and Submissions/Topic
Module/Topic
Chapter
Sections 4.6 to 4.9
Events and Submissions/Topic
Assignment 1 Due: Week 6 Monday (17 Dec 2018) 5:00 pm AEST
Module/Topic
Shearing Stress and Thin-Walled Members
Chapter
Chapter 6
Events and Submissions/Topic
Module/Topic
Combined Loading
Chapter
Events and Submissions/Topic
Module/Topic
Transformation of Stress & Strain (Principal Stresses)
Chapter
Chapters 7 & 8
Events and Submissions/Topic
Residential School
Module/Topic
Deflection of Beams
Chapter
Chapter 9
Events and Submissions/Topic
Module/Topic
Column Buckling
Chapter
Chapter 10
Events and Submissions/Topic
Assignment 2 is due on Wednesday of this week.
Assignment 2 Due: Week 11 Wednesday (30 Jan 2019) 5:00 pm AEST
Module/Topic
Revision
Chapter
Events and Submissions/Topic
Practical report is due on Friday of this week.
Practical Reports Due: Week 12 Friday (8 Feb 2019) 5:00 pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
Objective.
The aim of this assignment is to allow the students to demonstrate their understanding of various concepts, theories and processes studied/developed in the topics covered until week 5 from the Study Schedule.
Assignment 1 will be available by start of Week 1 through unit website.
Week 6 Monday (17 Dec 2018) 5:00 pm AEST
Two weeks after the due date feedback will be returned.
Each question in this assignment will be assessed for the criterion accuracy and correct results.
- Correct application of mathematics and arithmetic
- Answers clearly identified
- Correct result
In addition, the assignment as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in analysis are present in correct order
- Clear presentation of mathematical and arithmetical working linking given details of the problem to the results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of choices made in the analysis (why is procedure required, why this particular procedure)
- Interpretation of results as necessary (such as limitations)
Professional presentation
- The task is clearly identified (problem, date, analyst)
- Clear statement of each problem and its details and requirements
- Logical layout of analysis
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results.
- Apply the principles and theories of mechanics of materials to the analysis of structural members
- Determine sectional properties, stresses and deflections of structural members
- Analyse structural members subjected to combined axial force, torsion, bending moment and shear force
- Determine principal stresses and discuss failure criteria for a range of engineering materials
- Demonstrate a professional level of communication and team work
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
2 Written Assessment
Objective:
The aim of this assignment is to allow the students to demonstrate their understanding of various concepts, theories and processes studied/developed in the topics covered from week 6 to week 11 from the Study Schedule.
Assignment 2 will be available by end of week 6 through unit website.
Week 11 Wednesday (30 Jan 2019) 5:00 pm AEST
Two weeks after the due data feedback is returned.
Each question in this assignment will be assessed for the criterion accuracy and correct results.
- Correct application of mathematics and arithmetic
- Answers clearly identified
- Correct result
In addition, the assignment as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in analysis are present in correct order
- Clear presentation of mathematical and arithmetical working linking given details of the problem to the results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of choices made in the analysis (why is procedure required, why this particular procedure)
- Interpretation of results as necessary (such as limitations)
Professional presentation
- The task is clearly identified (problem, date, analyst)
- Clear statement of each problem and its details and requirements
- Logical layout of analysis
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results.
- Apply the principles and theories of mechanics of materials to the analysis of structural members
- Determine sectional properties, stresses and deflections of structural members
- Analyse structural members subjected to combined axial force, torsion, bending moment and shear force
- Determine principal stresses and discuss failure criteria for a range of engineering materials
- Demonstrate a professional level of communication and team work
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
3 Practical and Written Assessment
Objective:
Practical exercises assist the student to achieve the Learning Outcomes for this unit. Students required to complete the laboratory activities as per instruction given in the Practical Instruction Sheets. The Practical Instruction Sheets and report requirements will be given on the unit website.
Week 12 Friday (8 Feb 2019) 5:00 pm AEST
Two weeks after the due date the feedback is returned.
Each reports will be assessed separately for the criterion accuracy and correct procedure as required in the Instruction.
- Correct application of mathematics and arithmetic
- Results clearly identified and explained
- Correct results/explanation
In addition, the report as a whole will be assessed against the following criteria:
Evidence of correct procedures
- All necessary steps in experiment and reporting are followed in correct order
- Clear presentation of results obtained
- Evidence of checking results (mathematical, graphical, logic-common sense)
Evidence of understanding of the topic
- Explanation of possible error in the experiment
- Interpretation of results
Professional presentation
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results
- Apply the principles and theories of mechanics of materials to the analysis of structural members
- Determine sectional properties, stresses and deflections of structural members
- Analyse structural members subjected to combined axial force, torsion, bending moment and shear force
- Demonstrate a professional level of communication and team work
- Communication
- Problem Solving
- Information Literacy
- Team Work
Examination
Calculator - non-programmable, no text retrieval, silent only
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.