Overview
Structural Design I is an advanced civil engineering unit that introduces the analysis and design of complex reinforced and prestressed concrete structures. In this unit, you will develop knowledge on state-of-the-art construction materials and design technologies in the context of structural engineering and environmental sustainability. You will be expected to conceptualise the vertical and horizontal load resisting mechanism of concrete structural systems, interpret and apply the relevant Australian Standards, and ensure the designed structure/structural components also meet the serviceability and stakeholder requirements. The use of commercial computer software is required to analyse and design these structures. In this unit, you will document the processes involved in modelling, analysis, design, and communication, and work and learn, both individually and in teams in a professional manner.
Details
Pre-requisites or Co-requisites
Anti-Requisite: ENEC14014 Structural and Geotechnical Design
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2020
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Moodle
Well organised and delivered unit.
This practice will be continued in the future offering as well.
Feedback from Moodle
Lecturers are supportive and available for consultation when required.
This practice will be continued in the future offering as well.
- Determine various types of loads acting on a structural system, provide a rationale for load combinations applied, and conceptualise the load resisting concrete structural systems
- Formulate, plan, manage, and complete projects, individually or in teams, in an ethical and professional manner considering stakeholder requirements and principals of sustainable development
- Design complex reinforced concrete structural components using appropriate Australian Standards
- Design prestressed concrete structural components using appropriate Australian Standards
- Use appropriate software to analyse and/or design the structural components subjected to different load combinations
- Demonstrate a professional level of communication and leadership.
The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Professional Engineers.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Written Assessment - 35% | ||||||
2 - Written Assessment - 35% | ||||||
3 - Take Home Exam - 30% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Knowledge | ||||||
2 - Communication | ||||||
3 - Cognitive, technical and creative skills | ||||||
4 - Research | ||||||
5 - Self-management | ||||||
6 - Ethical and Professional Responsibility | ||||||
7 - Leadership | ||||||
8 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Written Assessment - 35% | ||||||||
2 - Written Assessment - 35% | ||||||||
3 - Take Home Exam - 30% |
Textbooks
Reinforced and Prestressed Concrete
3rd Edition (2018)
Authors: Yew-Chaye Loo and Sanaul Huq Chowdhury
Cambridge University Press
Melbourne Melbourne , VIC , Australia
ISBN: 9781108405645
Binding: Paperback
Additional Textbook Information
If you prefer to study with a paper copy, they are available at the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code). eBooks are available at the publisher's website.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
No referencing style set.
t.suntharavadivel@cqu.edu.au
Module/Topic
Introduction of RC Design
Limit State Design and Load Combinations
Design Properties of Concrete and Reinforcement
Durability and Fire Resistance
Structural Analysis
Chapter
Events and Submissions/Topic
Module/Topic
Design of Rectangular Beam
- Ultimate Limit State requirements
- Serviceability Limit State requirements
Chapter
Events and Submissions/Topic
Module/Topic
Design of T-Beams and irregular shapes
Chapter
Events and Submissions/Topic
Module/Topic
Design of Slab
- One-way and two-way slabs
- Suspended Slabs
Chapter
Events and Submissions/Topic
Module/Topic
Design of Columns
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Design of Walls and Footings
Strut-and-tie Modelling
Chapter
Events and Submissions/Topic
Module/Topic
Introduction to PC Design
- Principle of prestressing
- Type of prestress
Chapter
Events and Submissions/Topic
Module/Topic
Analysis and Design of PC (Magnel Diagram)
Chapter
Events and Submissions/Topic
Module/Topic
Determine the Tendon Details
Chapter
Events and Submissions/Topic
Module/Topic
Ultimate Moment Checks and Losses
Chapter
Events and Submissions/Topic
Module/Topic
End-block Design
Chapter
Events and Submissions/Topic
Module/Topic
Revision
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Read ENEC20001: General Information available from the unit website.
1 Written Assessment
You will be asked to design a low-rise RC building as per a client's requirements. The project briefing will be released on Friday, Week 2.
Week 7 Monday (31 Aug 2020) 5:00 pm AEST
Submit a single PDF/Word file. Late submission penalty is 5% per day of the allotted marks. Extension requests greater than 14 days will be denied except under exceptional circumstances.
Week 9 Tuesday (15 Sept 2020)
Each question will be assessed for the criterion accuracy and correct answers.
- Correct application of mathematics and arithmetic
- Answers clearly identified and explained
- Correct results/explanation
In addition, the following criteria also will be considered:
Evidence of correct procedures
- All necessary steps in the analysis are followed in the correct order
- Clear presentation of mathematical working
Evidence of an understanding of the topic
- Use of correct principles and theories
- Interpretation of results as necessary
Professional presentation
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results
- Determine various types of loads acting on a structural system, provide a rationale for load combinations applied, and conceptualise the load resisting concrete structural systems
- Formulate, plan, manage, and complete projects, individually or in teams, in an ethical and professional manner considering stakeholder requirements and principals of sustainable development
- Design complex reinforced concrete structural components using appropriate Australian Standards
- Use appropriate software to analyse and/or design the structural components subjected to different load combinations
- Demonstrate a professional level of communication and leadership.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
2 Written Assessment
You will be asked to design a PC beam as per a client's requirements. The project briefing will be released on Friday, Week 6.
Week 12 Monday (5 Oct 2020) 5:00 pm AEST
Submit a single PDF/Word file. Late submission penalty is 5% per day of the allotted marks. Extension requests greater than 14 days will be denied except under exceptional circumstances.
Exam Week Tuesday (20 Oct 2020)
Each question will be assessed for the criterion accuracy and correct answers.
- Correct application of mathematics and arithmetic
- Answers clearly identified and explained
- Correct results/explanation
In addition, the following criteria also will be considered:
Evidence of correct procedures
- All necessary steps in the analysis are followed in the correct order
- Clear presentation of mathematical working
Evidence of an understanding of the topic
- Use of correct principles and theories
- Interpretation of results as necessary
Professional presentation
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results
- Determine various types of loads acting on a structural system, provide a rationale for load combinations applied, and conceptualise the load resisting concrete structural systems
- Formulate, plan, manage, and complete projects, individually or in teams, in an ethical and professional manner considering stakeholder requirements and principals of sustainable development
- Design prestressed concrete structural components using appropriate Australian Standards
- Use appropriate software to analyse and/or design the structural components subjected to different load combinations
- Demonstrate a professional level of communication and leadership.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
3 Take Home Exam
End-of-Term Examination will be conducted in the form of an online test during the examination week.
Duration of the Test: 3 hours
Important: Students need to complete this online test at the prescribed time (notified via unit Moodle site). It is expected the student should on their web-camera for invigilation during the test.
Students may require to submit their workings on the conclusion of the examination (Scanned copy).
Exam day and time will be informed via Moodle site
Each question will be assessed for the criterion accuracy and correct answers.
- Correct application of mathematics and arithmetic
- Answers clearly identified and explained
- Correct results/explanation
In addition, the following criteria also will be considered:
Evidence of correct procedures
- All necessary steps in the analysis are followed in the correct order
- Clear presentation of mathematical working
Evidence of an understanding of the topic
- Use of correct principles and theories
- Interpretation of results as necessary
Professional presentation
- Appropriate use of diagrams, clear diagrams
- Correct use of terminology, conventions
- Clear English in the explanation of procedure and interpretation of results
- Design complex reinforced concrete structural components using appropriate Australian Standards
- Design prestressed concrete structural components using appropriate Australian Standards
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Self-management
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.