Overview
You should be able to work in teams to model, analyse and investigate design options for analogue and digital control systems. On satisfactory completion, you should be able to articulate typical control systems building blocks, and select appropriate components and interfaces for specific applications. In addition, you will be able to develop mathematical models to analyse the behaviour of selected dynamic systems and to design controllers for these systems. Distance Education (Flex) students will be required to attend a residential school to promote development of unit learning outcomes.
Details
Pre-requisites or Co-requisites
Prerequisites: (ENEE13020 Digital Electronics AND ENEE13018 Analogue Electronics) OR ENEX12002 Introductory Electronics.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2017
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from By email, student face to face and telephone conversations.
Students appreciate videoed lectures which explain the learning objectives for that particular session provided by unit co-ordinator lecturer.
Unit coordinator/lecturer to continue to use videoed lectures as a learning mechanism to deliver the learning objectives for unit.
Feedback from By email, student face to face and telephone conversations.
Students appreciate the unit co-ordinators use of Zoom videoconferencing workshops as a mechanism to discuss content of the unit, to identify problems with their understanding of the technical aspects of the unit content, to seek and be provided with information advice and feedback with regards to tutorial problems and assessment items.
Unit coordinator/lecturer to continue to use Zoom videoconferencing workshops as a mechanism to discuss content of the unit, to identify problems with their understanding of the technical aspects of the unit content, to seek and be provided with information advice and feedback with regards tutorial problems and assessment items.
Feedback from By email, student face to face and telephone conversations.
Students appreciate timely, detailed and focused feedback on their assessment submissions.
Unit coordinator/lecturer to continue to provide timely, detailed and focused feedback on students assessment submissions.
- Explain the principles of automatic control systems and typical control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system
- Discuss the role of the controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Professional Engineers.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Written Assessment - 20% | ||||||
2 - Practical Assessment - 10% | ||||||
3 - Practical Assessment - 10% | ||||||
4 - Written Assessment - 20% | ||||||
5 - Written Assessment - 0% | ||||||
6 - Examination - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Communication | ||||||
2 - Problem Solving | ||||||
3 - Critical Thinking | ||||||
4 - Information Literacy | ||||||
5 - Team Work | ||||||
6 - Information Technology Competence | ||||||
7 - Cross Cultural Competence | ||||||
8 - Ethical practice | ||||||
9 - Social Innovation | ||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Written Assessment - 20% | ||||||||||
2 - Practical Assessment - 10% | ||||||||||
3 - Practical Assessment - 10% | ||||||||||
4 - Written Assessment - 20% | ||||||||||
5 - Written Assessment - 0% | ||||||||||
6 - Examination - 40% |
Textbooks
Control Systems Engineering
Edition: 7th edn (2013)
Authors: Nise, N.S.
John Wiley & Sons
Hoboken Hoboken , NJ , USA
ISBN: 978-1-118-17051-9
Binding: Hardcover
Additional Textbook Information
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Access to a digital camera
- Access to a document scanner and pdf convereter
- A speaker and mic or a head set
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
p.keleher@cqu.edu.au
Module/Topic
Introduction to Control Systems, Laplace Transforms & Their inverses, transfer function
Chapter
1 & 2 (2.1-2.3)
Events and Submissions/Topic
Module/Topic
Modelling in Electrical and Mechanical Systems
Chapter
2 (2.4-2.8)
Events and Submissions/Topic
Module/Topic
Modelling in the Time Domain
Chapter
3
Events and Submissions/Topic
Module/Topic
Reduction of Multiple Subsystems
Chapter
5
Events and Submissions/Topic
Module/Topic
Poles, Zeros and System Response
Chapter
4
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Stability
Chapter
6 & 7
Events and Submissions/Topic
Module/Topic
Steady State Error
Chapter
7
Events and Submissions/Topic
Module/Topic
Control Systems - PLCs and SCADA
Chapter
No text reference
Events and Submissions/Topic
Module/Topic
Controller Design: Root Locus
Chapter
8 & 9
Events and Submissions/Topic
Module/Topic
Frequency Response techniques
Chapter
10 & 11
Events and Submissions/Topic
Module/Topic
Analysis of Discrete Controller Design
Chapter
13
Events and Submissions/Topic
Module/Topic
Discrete Controller Design
Chapter
13
Events and Submissions/Topic
Module/Topic
Review of topics.
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
You must provide detailed solutions to the problems indicated in the assignment in order to demonstrate your knowledge and understanding of the concepts and processes. This assignment is from the content covered in weeks 1 to 2.
Week 4 Friday (4 Aug 2017) 10:00 pm AEST
Monday (28 Aug 2017)
Uploaded into Moodle
Each question will be assessed for presentation and layout, correct procedure and accuracy. Further information will be available on the Assignment sheet in Moodle.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Explain the principles of automatic control systems and typical control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system
- Discuss the role of the controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
2 Practical Assessment
You must provide detailed laboratory reports by adopting the format outlined on the unit Moodle site. Failure to adopt the format will result in you obtaining a lower grade for your submission as you will not be appropriately demonstrating your knowledge and understanding.
Week 10 Friday (22 Sept 2017) 10:00 pm AEST
Distance students need to attend a compulsory residential school and internal students have laboratories scheduled through the term. Details will be provided during the term and you will be advised of the laboratory session times on the Moodle site.
Week 11 Friday (29 Sept 2017)
Distance students need to attend a compulsory residential school and internal students have laboratories scheduled through the term. Details will be provided during the term; see Moodle site for details.
Your lab report will be assessed for presentation and layout, correct procedure and accuracy. Further information will be be provided in Moodle
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
3 Practical Assessment
You must provide detailed laboratory reports by adopting the format outlined on the unit Moodle site. Failure to adopt the format will result in you obtaining a lower grade for your submission as you will not be appropriately demonstrating your knowledge and understanding.
Week 11 Friday (29 Sept 2017) 10:00 pm AEST
Distance students need to attend a compulsory residential school and internal students have laboratories scheduled through the term. Details will be provided during the term and you will be advised of the laboratory session times on the Moodle site.
Review/Exam Week Friday (13 Oct 2017)
Distance students need to attend a compulsory residential school and internal students have laboratories scheduled through the term. Details will be provided during the term on the Moodle site.
Your lab report will be assessed for presentation and layout, correct procedure and accuracy. Further information will be be provided in Moodle
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
4 Written Assessment
You must provide detailed solutions to the problems indicated in the assignment in order to demonstrate your knowledge and understanding of the concepts and processes. This assignment is based on the content covered from weeks 1- 7.
Week 9 Friday (15 Sept 2017) 10:00 pm AEST
Week 11 Friday (29 Sept 2017)
Each question will be assessed for presentation and layout, correct procedure and accuracy. Further information will be available on the Assignment sheet in Moodle.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Explain the principles of automatic control systems and typical control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system
- Discuss the role of the controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
5 Written Assessment
You must provide detailed solutions to all tutorial problems in order to demonstrate your knowledge and understanding of the concepts and processes. Only tutorial problems (no lecture notes or other notes) are to be included in the workbook and each set of tutorial problems needs to be clearly identified from the next.
Week 12 Friday (6 Oct 2017) 10:00 pm AEST
Workbooks results are released after the examination marking has been completed for the unit. However it is extremely important to monitor the Moodle site and your emails as you will be notified if you need to make changes to your submission; owing to omissions or errors you have made which will need to be promptly addressed within 2 days of receipt of notification.
The workbook is assessed on its merit of meeting the requirements of demonstrating your knowledge and understanding of the concepts and processes. Note that assessment will take into account presentation and layout.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Explain the principles of automatic control systems and typical control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system
- Discuss the role of the controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer aided tools
- Investigate and report the process of controller design for a dynamic system
- Communicate and document control system solutions, calculations and approaches, solved collaboratively or autonomously, using correct terminology, symbols and diagrams.
Examination
Dictionary - non-electronic, concise, direct translation only (dictionary must not contain any notes or comments).
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.