Overview
In this unit, you will work in teams to model, analyse, and investigate design options for analogue and digital control systems. You will articulate typical control systems building blocks and select appropriate components and interfaces for specific applications. In addition, you will develop mathematical models to analyse the behaviour of selected dynamic systems and design controllers for these systems. You will apply MATLAB/SIMULINK or equivalent software to analyse and simulate the control systems. Also, you must complete compulsory practical activities. Refer to the Engineering Undergraduate Course Moodle site for proposed dates.
Details
Pre-requisites or Co-requisites
Prerequisites: (ENEE13020 Digital Electronics or ENEX12002 Introductory Electronics) and ENEE12016 Signals and Systems.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2022
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Unit survey
Students appreciated the well structured Moodle site and the course.
Continue this good practice.
Feedback from Unit survey
Students appreciated the well explained lectures and tutorials.
Continue this good practice.
Feedback from Unit survey
Students wanted all labs to be conducted physically without having to do them remotely.
Build multiple modules for the newly developed DC motor lab to be able to conduct the labs physically on all campuses.
Feedback from Unit survey
Students expect more explanations on certain unit content.
Add more videos explaining more complicated unit content.
- Explain the principles of automatic control systems (analogue and/or digital) and typical associated control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system (analogue and/or digital)
- Evaluate the role of the analogue and/or digital controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer-aided tools
- Investigate and report the process of analogue and/or digital controller design for a dynamic system; solved collaboratively or autonomously
- Communicate and document analogue and/or digital control system solutions, calculations and approaches, using correct terminology, symbols and diagrams.
The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:
Intermediate
Advanced
Refer to the Engineering Undergraduate Course Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Written Assessment - 20% | ||||||
2 - Laboratory/Practical - 20% | ||||||
3 - Written Assessment - 20% | ||||||
4 - Online Test - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Communication | ||||||
2 - Problem Solving | ||||||
3 - Critical Thinking | ||||||
4 - Information Literacy | ||||||
5 - Team Work | ||||||
6 - Information Technology Competence | ||||||
7 - Cross Cultural Competence | ||||||
8 - Ethical practice | ||||||
9 - Social Innovation | ||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Textbooks
Control Systems Engineering
Edition: 8th edn or later (2013 or later)
Authors: Nise, N.S.
John Wiley & Sons
Hoboken Hoboken , NJ , USA
ISBN: 978-1-118-17051-9
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
s.alahakoon@cqu.edu.au
Module/Topic
Introduction to Control Systems
Chapter
Chapter 1: Introduction
Week 1 Study Guide
Events and Submissions/Topic
Module/Topic
Representation of control systems
Chapter
Chapter 2: Modeling in the Frequency Domain
Chapter 5: Reduction of Multiple Subsystems
Week 2, 3 Study Guide
Events and Submissions/Topic
Module/Topic
Representation of control systems
Chapter
Chapter 2: Modeling in the Frequency Domain
Chapter 5: Reduction of Multiple Subsystems
Week 2, 3 Study Guide
Events and Submissions/Topic
Module/Topic
Poles, zeros and the system response
Chapter
Chapter 4: Time Response
Chapter 7: Steady-State Errors
Week 4, 5 Study Guide
Events and Submissions/Topic
Module/Topic
Poles, zeros and the system response
Chapter
Chapter 4: Time Response
Chapter 7: Steady-State Errors
Week 4, 5 Study Guide
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Stability
Chapter
Chapter 6: Stability
Events and Submissions/Topic
Module/Topic
Overview of Digital Control
Chapter
Chapter 13: Digital Control Systems
Week 7 Study Guide
Events and Submissions/Topic
Residential school option 1: Labs in this unit will be held in Gladstone campus from 29th August till 31st August 2022. Online/Mixed Mode students may opt to attend in any campus depending on convenience.
Module/Topic
PID Control and State Space Design Techniques
Chapter
Week 8 Study Guide
Events and Submissions/Topic
Residential school option 2: Labs in this unit will be held in Bundaberg, Rockhampton, Mackay and Cairns campuses from 05th till 07th September 2022. Online/Mixed Mode students may opt to attend in any campus depending on convenience.
Module/Topic
Root Locus Based Controller Design
Chapter
Chapter 8: Root Locus Techniques
Chapter 9: Design Via Root Locus
Week 9, 10 Study Guide
Events and Submissions/Topic
Module/Topic
Root Locus Based Controller Design
Chapter
Chapter 8: Root Locus Techniques
Chapter 9: Design Via Root Locus
Week 9, 10 Study Guide
Events and Submissions/Topic
Module/Topic
Frequency Response Based Controller Design
Chapter
Chapter 10: Frequency Response Techniques
Chapter 11: Design Via Frequency Response
Week 11 Study Guide
Events and Submissions/Topic
Module/Topic
Industrial Control Systems - PLCs and SCADA and Unit Review
Chapter
Events and Submissions/Topic
Module/Topic
Topic Review: Students (No timetabled session)
Chapter
Events and Submissions/Topic
End of Term Online Test may be scheduled in Week 13 (REVIEW/EXAM WEEK) or Week 14 (EXAM WEEK)
Module/Topic
Chapter
Events and Submissions/Topic
Students may require Matlab/SIMULINK in order to complete assessment items in this unit. Matlab/SIMULINK can be installed free of charge by logging into Mathworks website through an account created using the CQUni email ID.
1 Written Assessment
Refer to the Moodle site for complete details of the assessment item.This is only a basic outline of the features relating to the assessment task. This assessment task will comprise questions, which require you to provide descriptive answers and detailed mathematical solutions in order to demonstrate your knowledge and understanding of the concepts and processes; including you providing your opinions, analysis and interpretation. Failure to adopt this approach will result in you obtaining a lower grade for your submission as you will not be appropriately demonstrating your knowledge and understanding. This assignment is from the content covered in weeks 1 to 5.
Week 5 Friday (12 Aug 2022) 11:59 pm AEST
Scan and upload to the link provided in unit Moodle site.
Week 7 Friday (2 Sept 2022)
Marked Assignment will be returned for student's feedback within two weeks of the due date.
Refer to the Moodle site for complete details of the Assignment Assessment Criteria sheet.This is only a basic outline of the features relating to the assessment task. Each submission will be assessed for presentation and layout, correct procedure, analysis and accuracy and appropriate referencing. The major assessment criteria relate to Analysis & Interpretation, Communication and Information Literacy. Ensure you access and read the details outlined in the Assignment Assessment Criteria sheet before commencing the assessment item. As you undertake the assessment item ensure you address all assessment criteria outlined. Also, at the completion of the assessment item, prior to submission, undertake an audit to ensure you have appropriately addressed all assessment criteria.
- Explain the principles of automatic control systems (analogue and/or digital) and typical associated control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system (analogue and/or digital)
2 Written Assessment
Refer to the Moodle site for complete details of the assessment task. This is only a basic outline of the features relating to the assessment task. This assessment task will comprise questions, which require you to provide descriptive answers and detailed mathematical solutions in order to demonstrate your knowledge and understanding of the concepts and processes; including you providing your opinions, analysis and interpretation. Failure to adopt this approach will result in you obtaining a lower grade for your submission as you will not be appropriately demonstrating your knowledge and understanding. This assignment is from the content covered in weeks 1 to 11.
Week 11 Friday (30 Sept 2022) 11:59 pm AEST
Make your individual submission to the link provided in Moodle site as a PDF/WORD file.
Review/Exam Week Friday (14 Oct 2022)
Feedback will be provided through unit Moodle site.
Refer to the Moodle site for complete details of the Assignment Assessment Criteria sheet. This is only a basic outline of the features relating to the assessment task. Each submission will be assessed for presentation and layout, correct procedure, analysis and accuracy and appropriate referencing. The major assessment criteria relate to Analysis & Interpretation, Communication and Information Literacy. Ensure you access and read the details outlined in the Assignment Assessment Criteria sheet before commencing the assessment item. As you undertake the assessment item ensure you address all assessment criteria outlined. Also, at the completion of the assessment item, prior to submission, undertake an audit to ensure you have appropriately addressed all assessment criteria.
- Evaluate the role of the analogue and/or digital controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer-aided tools
3 Laboratory/Practical
Dates for the compulsory residential school will be notified to students through residential school calendar and the course Website. Students will be formed into teams for all residential school activities and each team must submit professional technical laboratory reports compiled into one Zipped file covering each laboratory experiment they will carry out during the residential school. The details of the experiments will be notified to students through the unit Website. Please also refer to assessment criteria for more details.
Week 10 Friday (23 Sept 2022) 11:59 pm AEST
Submit to the link in the unit website in Moodle as a WORD or PDF file.
Week 12 Friday (7 Oct 2022)
Feedback given through unit website in Moodle
Marking of the team reports will be done according to the following criteria.
The accuracy and relevance of information
Application of knowledge
Language and grammar used in answering questions
Proper referencing of sources of information
Inclusion of all relevant Equations, images, data and tables, and the quality of presentation and layout.
- Investigate and report the process of analogue and/or digital controller design for a dynamic system; solved collaboratively or autonomously
- Communicate and document analogue and/or digital control system solutions, calculations and approaches, using correct terminology, symbols and diagrams.
4 Online Test
This online test may cover all topics from weeks 1 to 12 and may consist of a mix 4-6 numerical as well as descriptive answer questions.
This online test will be held during the University exam period (Week 13 or 14). The exact date and time will be confirmed by the end of week 9. This online test has a duration of 3 hrs. You will be provided with an additional 30 minutes to read the paper and to scan and upload the answer scripts. The Moodle submission link will become inactive 3.5 hrs after the start time. You are encouraged to sit the test from a location with a good Internet connection and where you have access to a scanner. If you are unable to find a scanner, you can use your mobile phone to scan and upload the answer scripts. Please find a list of Camera Scan apps below that is suitable for this.
- Adobe Scan (DC) https://adobescan.app.link/d/1n1NntFHTkb
- Microsoft Lens https://apps.apple.com/au/app/microsoft-lens-pdf-scanner/id975925059
- SwiftScan https://swiftscan.app/en/index.html
- CamScanner https://www.camscanner.com/
- ClearScan https://clearscanapp.com/
Submitted through unit Moodle site as a PDF file.
No Assessment Criteria
- Explain the principles of automatic control systems (analogue and/or digital) and typical associated control system building blocks
- Articulate the principles and applications of sensors and amplifiers; final control elements in an automatic control system (analogue and/or digital)
- Evaluate the role of the analogue and/or digital controller in a control system
- Model and analyse the behaviour of dynamic systems and the controller in combination using appropriate mathematical, graphical and computer-aided tools
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.