Overview
You will work in a team to analyse, design and prepare documentation for assigned projects using commercial software in the area of electrical power and control, with a focus on renewable energy. On satisfactory completion, you will be able to investigate solution options for an engineering problem in the area of electrical power and control, as well as, plan and control project work in a team environment, and document their professional decision-making processes; research current art of the discipline, check and evaluate validity of information, and prepare professional documentation for a project. Online students will be required to attend a residential school to promote development of unit learning outcomes.
Details
Pre-requisites or Co-requisites
ENEE13021 Power System Analysis & Design (Pre-Requisite), and ENEE13019 Control Systems Analysis & Design (Pre-Requisite).
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2019
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Residential Schools
This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.
Recommended Student Time Commitment
Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student survey
Student appreciated the inclusion of solar PV in PSS/E in the unit.
Continue focus on renewable energy.
Feedback from Student survey
Students feel that the unit is too much focused on Power and Control.
To look at Power and Control components.
- Perform advanced loadflow, stability and power quality calculations using commercial software
- Tune power system controllers to obtain desired performance
- Adequately size and site renewable generation and storage, and design transmission infrastructure so as to provide a sustainable and reliable power supply
- Produce a design which satisfies Australian Standards and National Electricity rules and takes into account the principles of environmental, social, and economic sustainability
- Present a design solution in the form of a report, a presentation, and a short paper suitable for presentation at a professional engineering conference
- Communicate, work and learn, both individually and in teams, in a professional manner.
The learning outcomes are linked to Engineers Australia Stage One Competencies.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Online Test - 20% | ||||||
2 - Online Test - 20% | ||||||
3 - Portfolio - 60% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Communication | ||||||
2 - Problem Solving | ||||||
3 - Critical Thinking | ||||||
4 - Information Literacy | ||||||
5 - Team Work | ||||||
6 - Information Technology Competence | ||||||
7 - Cross Cultural Competence | ||||||
8 - Ethical practice | ||||||
9 - Social Innovation | ||||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Online Test - 20% | ||||||||||
2 - Online Test - 20% | ||||||||||
3 - Portfolio - 60% |
Textbooks
Control Systems Engineering
Edition: 7 (2014)
Authors: Norman S. Nise
Wiley
USA
ISBN: 9781118170519
Binding: Paperback
Power System Analysis and Design
Edition: 6 (2017)
Authors: J. Duncan Glover, Thomas J. Overbye, Mulukutla Sarma
Cengage
Boston Boston , MA , USA
ISBN: 978-1-305-63618-7
Binding: Paperback
Additional Textbook Information
Both copies can be purchased at the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code)
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- MATLAB and Simulink Suite Software (For students without access to a CQUni campus), see the Textbook and Resources section for more information
- PSS/E Xplore Link for download supplied on Moodle and in project specification
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
k.emami@cqu.edu.au
Module/Topic
Review of Load Flow and Power System stability using classical machine models, review of PSS/E
Chapter
Chapters 6, and 11 of Glover, Sarma, and Overbye
Events and Submissions/Topic
Module/Topic
Detailed Machine models, Simple governors and exciters, PSS/E Modelling
Chapter
Events and Submissions/Topic
Module/Topic
Review of Control Theory, Small Signal Stability - Linear State space models, effect of fast exciters, Power System Stabilisers, AEMO Specifocations for damoing
Chapter
Refer to ENEE13019 notes on transfer functions and linear modelling.
Events and Submissions/Topic
Online Quiz 1
Online test 1 Due: Week 3 Friday (29 Mar 2019) 11:45 pm AEST
Module/Topic
Review of Compensator design, modelling of voltage response of synchronous machine, exciter tuning
Chapter
Refer to ENEE13019 notes on root locus design.and time domain response. See Nise chapters 4,8 and 9
Events and Submissions/Topic
Module/Topic
Modelling of Solar PV and Wind, effect on system performance. Effects of low system inertia, storage options
Chapter
See PSS/E models document
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Chapters 4 and 5, Glover, Sarma and Overbye
Events and Submissions/Topic
Project Progress Report
Module/Topic
Transmission lines and protection
Chapter
Chapter 10 Glover, Sarma and Overbye
Events and Submissions/Topic
Module/Topic
Power Quality Standards - Power Quality Issues with Renewables
Chapter
Events and Submissions/Topic
Module/Topic
Allocation of Harmonic levels, Review of Electricity Market
Chapter
Events and Submissions/Topic
Online Quiz 2
Online Test 2 Due: Week 9 Friday (17 May 2019) 11:45 pm AEST
Module/Topic
Review of unit and portfolio requirements
Chapter
Events and Submissions/Topic
Module/Topic
Question and Answer session regarding project
Chapter
Events and Submissions/Topic
Module/Topic
Question and Answer session regarding project
Chapter
Events and Submissions/Topic
Portfolio due consisting of final report and recorded presentation. Progress report should be included as an appendix. Also self and peer assessment needs to be done as part of the final report submission.
Portfolio - Progress, report(15%), presentation(15%) and Final Report(30%) Due: Week 12 Friday (7 June 2019) 11:45 pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
A minimum mark of 40% applies in each online test and a minimum score of 50% applies to the total portfolio mark.
1 Online Test
Questions covering load flow analysis, reactive compensation, transmission line modelling, basic power system stability including the swing equation and critical clearing times, operation of PSS/E
Week 3 Friday (29 Mar 2019) 11:45 pm AEST
Week 4 Monday (1 Apr 2019)
Accuracy and correctness of answers
- Perform advanced loadflow, stability and power quality calculations using commercial software
- Problem Solving
- Critical Thinking
2 Online Test
Questions on modelling of detailed synchronous machines, exciters, power system stabilisers, and renewable generation, use of PSS/E in modelling the aforementioned, power system quality
Week 9 Friday (17 May 2019) 11:45 pm AEST
Week 10 Monday (20 May 2019)
Accuracy and correctness of answers
- Tune power system controllers to obtain desired performance
- Problem Solving
- Critical Thinking
3 Portfolio
Portfolio consists of a progress report due at 11:45 pm on the Friday of week 6, and a final report and recorded group presentation all due at 11:45pm on the Friday of week 12. Mark sheets for these tasks will be provided on Moodle. These are group submissions however the marks will be individualised based on self and peer assessment of your contribution in the case of the reports and individual performance in the case of the presentation. The self and peer assessment is done through the university Self and Peer assessment (SPA) system. Details of this will be given on Moodle.
Weightings of these component in respect of the term totals are as follows
Progress report : 15%
Presentation : 15%
Final Report: 30%
making a total of 60% for the entire portfolio.
Week 12 Friday (7 June 2019) 11:45 pm AEST
Progress Report due 11:45PM 26 April 2019 (week 6), Final Report and recorded presentation due 11:45pm 7 June 2019 (week 12)
Exam Week Friday (21 June 2019)
Within two weeks of due date
Progress Report
1. Technical accuracy in
(a) load flow based analysis and design
(b) detailed machine modelling including choice of H value for solar thermal
(c) modelling of exciters and PSS's and Critical clearing time calculations
(d) tuning of exciter for solar thermal
2. statement of issues and evidence of intra and inter team communication, team charter and self and peer assessments
3. plan for future work including Gantt chart
4. succinctness, correct grammar, spelling formatting etc
Final Report
1. Technical accuracy in the topics mentioned under progress report plus
(a) Estimation of harmonic issues that may arise from installation of solar plant
(b) Estimation of other power quality issues such as flicker and phase unbalance
(c) Sizing of storage.
(d) modelling of renewables in PSS/E
(e) assessment of impact of solar on system stability and discussion of mitigation measures
(f) sustainability report across triple bottom line
(g) assessment of NER clauses
(h) impact on the electricity market
2. statement of issues and evidence of intra and inter team communication, team charter and modification thereof where necessary as well as self and peer assessments
3. Risk assessment
4. succinctness, correct grammar, spelling formatting etc
5. recommendations
Presentation
1. Technical aspects with respect to those mentioned under final report including sustainability and risk assessment and recommendations
2. Clarity and succinctness of slides
3. Presentation being ten minutes or less
4. Participation of all members of team and individual performance
- Perform advanced loadflow, stability and power quality calculations using commercial software
- Tune power system controllers to obtain desired performance
- Adequately size and site renewable generation and storage, and design transmission infrastructure so as to provide a sustainable and reliable power supply
- Produce a design which satisfies Australian Standards and National Electricity rules and takes into account the principles of environmental, social, and economic sustainability
- Present a design solution in the form of a report, a presentation, and a short paper suitable for presentation at a professional engineering conference
- Communicate, work and learn, both individually and in teams, in a professional manner.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Cross Cultural Competence
- Ethical practice
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.