Overview
In this unit, you will work in a team to analyse and design electrical power and control systems by applying PSSE or equivalent industry software. You will also focus on renewables, promoting the United Nations Sustainable Development Goal 7: Affordable and Clean Energy. On satisfactory completion, you will be able to investigate solutions for contemporary engineering problems, plan and control project work in a team environment, research current practice in this discipline, execute evidence-based decision-making, check and evaluate the validity of information, and prepare professional documentation for a project.
Details
Pre-requisites or Co-requisites
Prerequisites: ENEE13021 Power System Analysis and Design AND ENEE13019 Control Systems Analysis and Design
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2023
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Unit evaluation
Students appreciated professionalism of the unit coordinator and his willingness to assist students promptly.
Continue this good practice.
Feedback from Unit evaluation
Students found the content of this unit very informative and practical.
Continue this good practice.
Feedback from Unit evaluation
Students appreciated the contents of online tests. However, they mentioned some of questions in the tests are difficult to understand and need rewording.
In the next offering, revisit the question bank and correct the wording of questions that are not clear. If necessary, be more descriptive.
Feedback from Unit evaluation
Students mentioned that the design specification of the project included inconsistent data.
In the next offering, review the project specification for any inconsistency.
- Perform advanced load flow, stability, and power quality calculations using commercial software
- Tune power system controllers to obtain the desired performance
- Design power transmission infrastructure and renewable generation and storage systems for a reliable power supply
- Apply the Australian Standards, National Electricity rules and general principles of sustainable development
- Present design outcomes professionally as a report, short conference paper and presentation
- Communicate, work and learn, both individually and in teams, in a professional manner.
The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:
Intermediate
1.4 Discernment of knowledge development and research directions within the engineering discipline. (LO: 1I 2I 3I 4I)
1.5 Knowledge of engineering design practice and contextual factors impacting the engineering discipline. (LO: 1I 2I 3I 4I)
2.2 Fluent application of engineering techniques, tools, and resources. (LO: 1I 2I 3I 4I)
3.3 Creative, innovative, and proactive demeanor. (LO: 5I 6I)
Advanced
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 1A 2A 3A 4I)
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 1A 2A 3A 4A)
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 1I 2I 3I 4A)
1.6 Understanding of the scope, principles, norms, accountabilities, and bounds of sustainable engineering practice in the specific discipline. (LO: 4A)
2.1 Application of established engineering methods to complex engineering problem-solving. (LO: 1I 2I 3I 4A)
2.3 Application of systematic engineering synthesis and design processes. (LO: 3A 4A)
2.4 Application of systematic approaches to the conduct and management of engineering projects. (LO: 4A)
3.2 Effective oral and written communication in professional and lay domains. (LO: 5A)
3.4 Professional use and management of information. (LO: 3A 4A)
3.5 Orderly management of self, and professional conduct. (LO: 4I 5I 6A)
3.6 Effective team membership and team leadership. (LO: 5A 6A)
Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate, and A - Advanced.
Refer to the Engineering Undergraduate Course Moodle site for further information on Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course-level mapping information https://moodle.cqu.edu.au/course/view.php?id=1511
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Online Test - 20% | ||||||
| 2 - Online Test - 20% | ||||||
| 3 - Portfolio - 60% | ||||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Communication | ||||||
| 2 - Problem Solving | ||||||
| 3 - Critical Thinking | ||||||
| 4 - Information Literacy | ||||||
| 5 - Team Work | ||||||
| 6 - Information Technology Competence | ||||||
| 7 - Cross Cultural Competence | ||||||
| 8 - Ethical practice | ||||||
| 9 - Social Innovation | ||||||
| 10 - Aboriginal and Torres Strait Islander Cultures | ||||||
Textbooks
Control Systems Engineering
Edition: 8th edn (2019)
Authors: Norman S. Nise
Wiley
Hoboken Hoboken , NJ , USA
ISBN: 9781119561880
Binding: Paperback
Power System Analysis and Design
Edition: 6 (2017)
Authors: J. Duncan Glover, Thomas J. Overbye, Mulukutla Sarma
Cengage
Boston Boston , MA , USA
ISBN: 978-1-305-63618-7
Binding: Paperback
Additional Textbook Information
Textbooks can be accessed online at the CQUniversity Library website. If you prefer your own copy, you can purchase either paper or eBook versions at the CQUni Bookshop here: http://bookshop.cqu.edu.au (search on the Unit code)
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- MATLAB and Simulink Suite Software (For students without access to a CQUni campus), see the Textbook and Resources section for more information
- PSS/E Xplore Link for download supplied on Moodle and in project specification
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
k.emami@cqu.edu.au
Module/Topic
Review of Load Flow and fault calculations, models of power system components review of PSS/E
Chapter
Chapters 6-9, of Glover, Sarma, and Overbye
Events and Submissions/Topic
Module/Topic
Power system dynamics, classical machine model, swing equation, critical clearing time, detailed machine models,, simulation using PSSE
Chapter
Events and Submissions/Topic
Module/Topic
Review of Control Theory, transfer functions, Linear State space models, exciters and governors, modelling of exciters and governors, in PSSE, AEMO Specifications for damping
Chapter
Refer to ENEE13019 notes on transfer functions and linear modelling, Nise chapters 2,3 , Glover et al chapters 11 and 12 and PSSE Models document
Events and Submissions/Topic
Module/Topic
Review of Compensator design, modelling of voltage response of synchronous machine, exciter tuning, effect of fast exciters on dynamic stability
Chapter
Refer to ENEE13019 notes on root locus design.and time domain response. See Nise chapters 4,8 and 9
Events and Submissions/Topic
Module/Topic
Modelling of Solar PV and Wind, effect on system performance, AS4777 Effects of low system inertia, storage options, low voltage ride through issues
Chapter
PSS/E models document and AS4777
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
AS/NZS 61000.3.2:2003
Events and Submissions/Topic
Module/Topic
Other aspects of power quality - flicker and negative sequence, estimation, effect of and on renewable generation
Chapter
National Electricity Rules (NER) chapter 5
AS/NZS61000.3.7:2001
Events and Submissions/Topic
Project Progress Report (15% of Portfolio) Due: Week 7 Friday (28 April 2023) 11:45 pm AEST
Module/Topic
Introduction to the NER clauses for connection, NER clauses S5.2.5.1 - S5.2.5.6
Chapter
NER chapter 5
Events and Submissions/Topic
Module/Topic
Introduction to the NER clauses for connection, NER clauses S5.2.5.7 - S5.2.5.14 and S5.2.6.1, S5.2.6.2
Chapter
Events and Submissions/Topic
Module/Topic
Introduction to the Australian electricity market, market impact of renewables, Sustainability triple bottom line
Chapter
Events and Submissions/Topic
Module/Topic
Review of unit and portfolio requeirements
Chapter
Events and Submissions/Topic
Module/Topic
Question and Answer session regarding project
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Online Test
Questions covering load flow analysis, reactive compensation, transmission line modelling, basic power system stability including the swing equation and critical clearing times, operation of PSS/E
Week 3 Friday (24 Mar 2023) 11:45 pm AEST
Week 4 Monday (27 Mar 2023)
Accuracy and correctness of answers
- Perform advanced load flow, stability, and power quality calculations using commercial software
2 Online Test
Questions on modelling of detailed synchronous machines, exciters, power system stabilisers, and renewable generation, use of PSS/E in modelling the aforementioned, power system quality
Week 10 Friday (19 May 2023) 11:45 pm AEST
Week 11 Monday (22 May 2023)
Accuracy and correctness of answers
- Tune power system controllers to obtain the desired performance
3 Portfolio
Portfolio consists of a progress report due at 11:45 pm AEST on the Friday of week 7, and a final report and recorded group presentation all due at 11:45 pm AEST on the Friday of week 13. Grading criteria for these tasks will be provided on Moodle. These are group submissions however the marks will be individualised based on self and peer assessment of your contribution in the case of the reports and individual performance in the case of the presentation. The self and peer assessment is done through the university Self and Peer assessment (SPA) system. Details of this will be given on Moodle.
Weightings of these component in respect of the term totals are as follows
Progress report : 15%
Presentation : 15%
Final Report: 30% including 5% from self and peer assessment
making a total of 60% for the entire portfolio.
Review/Exam Week Friday (9 June 2023) 11:45 pm AEST
Progress Report due 11:45 PM 28 April 2023 (week 7), Final Report and recorded presentation due 11:45 pm 9 June 2023 (week 13)
Within two weeks of due date
Progress Report
1. Technical accuracy in
(a) load flow based analysis and design
(b) detailed machine modelling
(c) modelling of exciters and PSS's and Critical clearing time calculations
(d) tuning of exciters
2. statement of issues and evidence of intra and inter team communication, team charter and self and peer assessments
3. plan for future work including Gantt chart
4. succinctness, correct grammar, spelling formatting etc
Final Report
1. Technical accuracy in the topics mentioned under progress report plus
(a) Estimation of harmonic issues that may arise from installation of solar plant
(b) Estimation of other power quality issues such as flicker and phase unbalance
(c) Sizing of storage.
(d) modelling of renewables in PSS/E
(e) assessment of impact of solar on system stability and discussion of mitigation measures
(f) sustainability report across triple bottom line
(g) assessment of NER clauses
(h) impact on the electricity market
(i) addressing Progress Report feedback in a separate section
2. statement of issues and evidence of intra and inter team communication, team charter and modification thereof where necessary as well as self and peer assessments
3. Risk assessment
4. succinctness, correct grammar, spelling formatting etc
5. recommendations
Presentation
1. Technical aspects with respect to those mentioned under final report including sustainability and risk assessment and recommendations
2. Clarity and succinctness of slides
3. Presentation being ten minutes or less
4. Participation of all members of team and individual performance
- Perform advanced load flow, stability, and power quality calculations using commercial software
- Tune power system controllers to obtain the desired performance
- Design power transmission infrastructure and renewable generation and storage systems for a reliable power supply
- Apply the Australian Standards, National Electricity rules and general principles of sustainable development
- Present design outcomes professionally as a report, short conference paper and presentation
- Communicate, work and learn, both individually and in teams, in a professional manner.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
