Overview
In this unit, you will learn to work both individually and in teams in the planning, analysis, and design of power systems and their associated control systems using state-of-the-art methods. You will design power systems to incorporate the growing penetration of renewable energy sources. In order to do this, you will develop advanced skills to effectively design, analyse, and augment power systems to maximise reliability, security, and sustainability. Upon successful completion of this unit, you will be able to analyse systems incorporating renewable energy sources both dynamically and in steady-state using industry-standard software such as Power System Simulator for Engineering (PSSE). You will be able to tune control systems to satisfy Australian network standards and you will become competent to meet the challenges and opportunities of 21st-century power systems as they continue to evolve. You will apply skills in ENEE20001 to work towards the United Nations sustainable development goal. Online students are required to attend a residential school.
Details
Pre-requisites or Co-requisites
ENEE14005 Capstone Power and Control Design is an Anti-Requisite for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2023
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Live lectures
Students appreciated the interaction with the Lecturer.
Keep facilitating student involvement during live sessions.
Feedback from Tutorials
Students value face-to-face and software support during tutorial sessions.
Develop supporting roles of tutors further.
- Conduct load-flow and fault analyses of complex power systems in order to augment the system to optimise power flows and voltage profiles
- Model advanced dynamics of complex power systems to determine transient stability limits
- Perform dynamic stability analysis of complex power systems in order to improve power system damping
- Model renewable power plants in steady-state and transient situations to quantify their impact on system security
- Discuss the impact of power system augmentations on economic, social, and environmental sustainability
- Work autonomously and in teams on complex power engineering projects including providing leadership
- Document and communicate professional engineering information including computer-based simulations and drawings using appropriate electrical engineering standards, terminology, and symbols.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | ||||||
---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | |
1 - In-class Test(s) - 20% | |||||||
2 - In-class Test(s) - 40% | |||||||
3 - Project (applied) - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | ||||||
---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | |
1 - Knowledge | |||||||
2 - Communication | |||||||
3 - Cognitive, technical and creative skills | |||||||
4 - Research | |||||||
5 - Self-management | |||||||
6 - Ethical and Professional Responsibility | |||||||
7 - Leadership | |||||||
8 - Aboriginal and Torres Strait Islander Cultures |
Textbooks
POWER SYSTEM ANALYSIS AND DESIGN, SI Edition
6th Edition (2016)
Authors: J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma
Cengage Learning
Boston Boston , MA , USA
ISBN: 9781305636187
Binding: Other
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Access to a document scanner and a pdf converter
- Computer with Windows OS, headphones & microphone
- The free version of PSS/E software - downloadable from the internet
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
n.das@cqu.edu.au
Module/Topic
Review of power systems, models of generators, lines, loads, transformers, load flow analysis: methods, reactive compensation, reactors, capacitors, SVCs, Load flow analysis using PSS/E
Chapter
Glover, Sarma, and Overbye
Chapter 3, sections3.1 to 3.6
Chapter 5
Chapter 6 sections 6.1-6.9
Events and Submissions/Topic
Module/Topic
Load flow planning studies, modelling with symmetrical components, balanced and unbalanced fault analysis, analysis of unbalanced systems, negative sequence operating limits, hand calculations
Chapter
Glover, Sarma and Overbye
Chapter 8
Chapter 9
Events and Submissions/Topic
Module/Topic
Use of PSS/E in fault modelling and calculation, comparison with hand calculations.
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Introduction to power system stability, machine inertia, and the swing equation. Classical machine models. Single machine infinite bus stability, equal area criterion, numerical integration of the swing equation, multi-machine systems, modelling in PSS/E
Chapter
Glover, Sarma and Overbye
Chapter 11, sections 11.1- 11.5
Events and Submissions/Topic
Module/Topic
Detailed machine models, exciters, and governors, modelling in PSS/E.
Case Studies.
Modelling of wind, solar, PV, and solar Thermal.
Chapter
Glover, Sarma and Overbye
Chapter 11, section 11.6'
Chapter 12, Sections 12.1, 12.2
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Review of linear control theory, transfer functions, poles and zeros, open-loop and closed-loop systems, root locus, design of compensators using root locus, Bode plots
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Progress Report Due: Week 6 Friday (25 Aug. 2023) 11:59 pm AEST
Module/Topic
Linear state-space models, significance of eigenvalues, transfer function to state space conversions, small signal state-space model of a power system.
Effect of high gain exciter on damping, Power system
stabilisers.
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Effect of high gain exciter on damping, Power System Stabilisers. Tuning of exciters using root locus techniques.
General review of PSS tuning methods.
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Review of the Australian Electricity market, the role of renewables, sustainability and the triple bottom line, issues related to high penetration of renewables.
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Transmission Line Design and Protection
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Review of the unit, requirements of portfolio submission, practice presentations, feedback on progress reports.
Chapter
Refer to Lecture Notes
Events and Submissions/Topic
Module/Topic
Consultation
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
End-of-Term In-Class Test - date and time to be confirmed by Week 9, and published on Moodle.
Module/Topic
Chapter
Events and Submissions/Topic
1 In-class Test(s)
- This is an open-book test covering all the lectures and tutorials up to the end of week 4.
- The test will be held during the Week 5 lecture time and the duration will be 60 min.
- The test will be monitored through a Zoom session and students will have to provide written answers to the test questions.
- Each student stays home with a device (preferably a laptop) essentially having a camera through which the student will be invigilated in a Zoom session during the test.
- The test paper will be loaded to Moodle.
- The student uses blank A4 papers (single side) to write answers.
- At the end of the test, each student first takes photos of all written pages and emails them to the invigilator.
- Later students scan the pages and upload them to Moodle by the due time specified in Due Date Information section.
Week 5 Monday (7 Aug 2023) 1:00 pm AEST
We strive to return assessments to students within 2 weeks.
A total of 100 marks is allocated to this assessment. Students are assessed on the accuracy of calculated results and the correctness of the method used.
- Conduct load-flow and fault analyses of complex power systems in order to augment the system to optimise power flows and voltage profiles
2 Project (applied)
For this assessment, you will design a specified power system for which the analysis will be mainly done using PSS/E simulations. The project description will be available in the Moodle link of the unit.
Week 12 Friday (6 Oct 2023) 11:59 pm AEST
This will be the due date for the final report and the recorded presentation.
We strive to return assessments to students within 2 weeks.
A total of 100 marks is allocated to this assessment. Students are assessed on the accuracy of calculated results and the correctness of the method used. Below is the contribution of each assessment item to the final mark of this assessment:
- Total progress report (30%)
- Presentation (25%)
- Final Report (45%)
- Conduct load-flow and fault analyses of complex power systems in order to augment the system to optimise power flows and voltage profiles
- Model advanced dynamics of complex power systems to determine transient stability limits
- Perform dynamic stability analysis of complex power systems in order to improve power system damping
- Model renewable power plants in steady-state and transient situations to quantify their impact on system security
- Discuss the impact of power system augmentations on economic, social, and environmental sustainability
- Work autonomously and in teams on complex power engineering projects including providing leadership
- Document and communicate professional engineering information including computer-based simulations and drawings using appropriate electrical engineering standards, terminology, and symbols.
3 In-class Test(s)
- The students are to solve four problems on the associated topics covering all the lectures and tutorials up to the end of week 8.
- The test duration will be 150 min.
- The end-of-term test will be monitored through a Zoom session and students will have to provide written answers to the exam questions.
- The test will be time scheduled and will take place for everyone at the same time.
- Each student will perform the test with a device (preferably a laptop) essentially having a camera through which the student will be invigilated in a Zoom session during the examination.
- The test paper will be uploaded to Moodle.
- The student uses blank A4 papers (single side) to write answers.
- At the end of the test, each student first takes photos of all written pages and emails them to the invigilator.
- Later, students scan the pages and upload them to Moodle by the due time specified in the Due Date Information section.
The End-of-Term In-Class Test will be conducted during the CQU exam period. The exact date and time will be confirmed by Week 9 and published in Moodle.
We strive to return assessments to students within 2 weeks.
A total of 100 marks is allocated to this assessment. Students are assessed on the accuracy of calculated results and the correctness of the method used.
- Model advanced dynamics of complex power systems to determine transient stability limits
- Perform dynamic stability analysis of complex power systems in order to improve power system damping
- Model renewable power plants in steady-state and transient situations to quantify their impact on system security
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.