Overview
This unit introduces you to key concepts and principles required to analyse problems involving heat exchange and energy conversion. You will analyse and design heat exchangers and analyse performance of compressors, internal combustion engines, gas turbines and jet propulsion. You will analyse combustion processes and estimate pollutant emissions, and analyse and design nozzles to promote safe and efficient combustion. You will prepare technical reports that demonstrate critical evaluation of results and experimental uncertainties. You are required to show your ability to work productively, both individually and collaboratively, to solve problems, and document and communicate their work clearly in a professional manner. On-campus students will be required to attend laboratory sessions to promote development of unit learning outcomes. Distance students will be required to attend a residential school to promote development of unit learning outcomes.
Details
Pre-requisites or Co-requisites
Prereq: ENEM13014 Thermodynamics or ENEM12003 Thermodynamics
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Residential Schools
This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student feedback.
The unit was well run.
The unit will be run in the same manner to support students' learning.
Feedback from Student feedback.
The tutorial solutions could be improved.
Videos of the tutorial questions being solved are available from previous offerings of this unit. Developing a new video for each tutorial problem is currently being investigated.
Feedback from Student feedback.
Assessment of learning in labs through interviews was well received.
It is recommended that the practice of assessing the learning of labs through an interview is continued.
- Explain principles of heat transfer and conversion between heat energy and mechanical power and apply these principles to solution of heat transfer and energy conversion problems
- Analyse, design and explain the performance of heat exchangers
- Analyse and explain the performance of compressors, internal combustion engines, gas turbines and jet propulsion
- Analyse and explain combustion processes and estimate pollutant emissions for internal combustion engines and gas turbines
- Analyse, design and explain nozzles to promote safe and efficient combustion
- Demonstrate individual capability to analyse, solve and explain energy conversion problems
This core Unit in the Mechanical Engineering course will help students meet the Engineers Australia's stage One Competencies by the completion of the degree.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Written Assessment - 25% | ||||||
| 2 - Practical and Written Assessment - 25% | ||||||
| 3 - Examination - 50% | ||||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Communication | ||||||
| 2 - Problem Solving | ||||||
| 3 - Critical Thinking | ||||||
| 4 - Information Literacy | ||||||
| 5 - Team Work | ||||||
| 6 - Information Technology Competence | ||||||
| 7 - Cross Cultural Competence | ||||||
| 8 - Ethical practice | ||||||
| 9 - Social Innovation | ||||||
| 10 - Aboriginal and Torres Strait Islander Cultures | ||||||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| 1 - Written Assessment - 25% | ||||||||||
| 2 - Practical and Written Assessment - 25% | ||||||||||
| 3 - Examination - 50% | ||||||||||
Textbooks
Applied Thermodynamics for Engineering Technologists
Edition: 5th (1993)
Authors: Eastop, T.D. and McConkey, A.
Pearson, Prentice Hall
Harlow Harlow , Essex , UK
ISBN: 9780582091931
Binding: Paperback
Thermodynamics and Transport Properties of Fluids (SI Units)
Edition: 5th (1995)
Authors: Rogers, G.F.C. & Mayhew, Y.R.
Blackwell
ISBN: 9780631197034
Binding: Paperback
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Video and audio equipment to join online tutorials
All submissions for this unit must use the referencing styles below:
For further information, see the Assessment Tasks.
j.hyde@cqu.edu.au
Module/Topic
Heat Transfer
Chapter
Chapter 16
Events and Submissions/Topic
Tutorial Problems: 16.1, 16.5, 16.6, 16.8
Module/Topic
Heat Transfer
Chapter
Chapter 16
Events and Submissions/Topic
Tutorial Problems: 16.16, 16.18, 16.20, 16.21, 16.22
Module/Topic
Heat Transfer
Chapter
Chapter 16
Events and Submissions/Topic
Tutorial Problems: 16.30, 16.37, 16.38, 16.44, 16.46
Module/Topic
Internal Combustion Engines
Chapter
Chapter 13
Events and Submissions/Topic
Residential school for Mixed Mode students
Tutorial Problems: 13.1, 13.2, 13.6, 13.8, 13.9
Module/Topic
Internal Combustion Engines
Chapter
Chapter 13
Events and Submissions/Topic
Tutorial Problems: 13.10, 13.11,13.13
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Combustion
Chapter
Chapter 7
Events and Submissions/Topic
Tutorial Problems: 7.1, 7.3, 7.5, 7.6
Module/Topic
Combustion
Chapter
Chapter 7
Events and Submissions/Topic
Tutorial Problems: 7.8, 7.9, 7.12
Module/Topic
Gas Turbine
Chapter
Chapter 9
Events and Submissions/Topic
Tutorial Problems: 9.1, 9.2, 9.3, 9.5
Module/Topic
Nozzles and Jet Propulsion
Chapter
Events and Submissions/Topic
Tutorial Problems: 10.1, 10.2, 10.3, 10.4
Assignment Due: Week 9 Monday (7 May 2018) 9:00 am AEST
Module/Topic
Nozzles and Jet Propulsion
Chapter
Chapter 10
Events and Submissions/Topic
Tutorial Problems: 10.7, 10.8, 10.9
Module/Topic
Compressors
Chapter
Chapter 12
Events and Submissions/Topic
Tutorial Problems: 12.3, 12.5, 12.9
Module/Topic
Review
Chapter
All
Events and Submissions/Topic
Tutorial Problems: 7.7, 10.5, 12.10
Module/Topic
Review
Chapter
All
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
The residential school for Mixed Mode students is from Monday 26th March until Thursday 30th March. A schedule of activities will be made available in Moodle.
1 Practical and Written Assessment
Each student will be required to complete the following:
- Performance study of heat exchangers (group-work) (Pass/Fail)
- Performance study of diesel engine (group-work) (Pass/Fail)
- Performance study of petrol engine (group-work) (Pass/Fail)
- Individual interview at completion of laboratory activities (25%)
The residential school for Mixed Mode students will be held in Rockhampton, 26-29 March 2018.
A detailed schedule for on-campus and Mixed Mode students will be supplied separately in Moodle.
The laboratory activities and interview are compulsory, non-attendance will be marked as zero and will result in a Fail for the entire unit.
As per the schedule provided in Moodle.
Feedback provided during the labs and on completion of the interview.
For the three Pass/Fail components students are expected to participate in the lab activity in order to enhance their understanding of the concepts demonstrated by the lab activity.
Students will be interviewed by the Unit Coordinator. In the interview students will be asked a series of questions which test their understanding of the lab activities, the concepts behind each lab activity and an understanding of how the theories apply to everyday machinery which use these concepts. Each student's mark will depend on their ability to answer the questions. Example questions will be available in Moodle. Interviews will be in person or via video conferencing technology (Zoom). The interview may be recorded.
No submission method provided.
- Explain principles of heat transfer and conversion between heat energy and mechanical power and apply these principles to solution of heat transfer and energy conversion problems
- Analyse, design and explain the performance of heat exchangers
- Analyse and explain the performance of compressors, internal combustion engines, gas turbines and jet propulsion
- Analyse and explain combustion processes and estimate pollutant emissions for internal combustion engines and gas turbines
- Analyse, design and explain nozzles to promote safe and efficient combustion
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Ethical practice
2 Written Assessment
The assignment will be based on topics covered in weeks one to seven; namely, Heat Transfer, Internal Combustion Engines and Combustion.
Week 9 Monday (7 May 2018) 9:00 am AEST
Week 11 Monday (21 May 2018)
After all students have submitted.
Correct analysis method
Appropriate use of diagrams
Correct final answer
Presentation
Referencing
Performance standards for the assessment criteria will be available in Moodle.
- Explain principles of heat transfer and conversion between heat energy and mechanical power and apply these principles to solution of heat transfer and energy conversion problems
- Analyse, design and explain the performance of heat exchangers
- Analyse and explain the performance of compressors, internal combustion engines, gas turbines and jet propulsion
- Analyse and explain combustion processes and estimate pollutant emissions for internal combustion engines and gas turbines
- Analyse, design and explain nozzles to promote safe and efficient combustion
- Demonstrate individual capability to analyse, solve and explain energy conversion problems
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Information Technology Competence
- Ethical practice
Examination
Calculator - all non-communicable calculators, including scientific, programmable and graphics calculators are authorised
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
