Overview
This capstone unit will allow you to apply knowledge in mine design, automation and social innovation to the conversion of a traditional mine site to an automated mine site. You will apply relevant legislation to an audit of the operation’s design elements to ensure they are suitable for automation. Your review will particularly address signals and communications between automated equipment and central dispatching. You will prepare a stakeholder management plan to keep the local community fully advised of potential impacts and proposed socially innovative solutions.
Details
Pre-requisites or Co-requisites
Pre-requisites: ENAR12013 Mine Planning and Design ENEX13001 Instrumentation and Industrial Automation ENEG11007 Engineering Industry Project Investigation
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2022
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
- Research current legislation related to automation of resource systems
- Design changes to a mine site to meet the signals and communication constraints required for automation
- Audit the design elements of an existing mining operation in terms of its compliance with safety, legislation and productivity
- Develop a stakeholder management plan to address community concerns related to the automation of a current mining operation
- Communicate the results of investigations via a professional level presentation and a written report.
The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:
Intermediate
Advanced
Refer to the Engineering Undergraduate Course Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Presentation - 20% | |||||
2 - Case Study - 20% | |||||
3 - Portfolio - 20% | |||||
4 - Report - 40% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Communication | |||||
2 - Problem Solving | |||||
3 - Critical Thinking | |||||
4 - Information Literacy | |||||
5 - Team Work | |||||
6 - Information Technology Competence | |||||
7 - Cross Cultural Competence | |||||
8 - Ethical practice | |||||
9 - Social Innovation | |||||
10 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Presentation - 20% | ||||||||||
2 - Case Study - 20% | ||||||||||
3 - Portfolio - 20% | ||||||||||
4 - Report - 40% |
Textbooks
There are no required textbooks.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
b.donnelly@cqu.edu.au
Module/Topic
Research automation on mine sites.
Chapter
Automated Drill Rigs
Review signals and communication systems used on mine sites to collect data and control automated mining equipment.
Events and Submissions/Topic
Module/Topic
Research automation on mine sites.
Chapter
Automated Haul Trucks
Review signals and communication systems used on mine sites to collect data and control automated mining equipment.
Events and Submissions/Topic
Module/Topic
Research automation on mine sites.
Chapter
Research legislation related to automation of mining equipment
Research hazards, incidents and controls related to automated mining equipment.
Research standards and guidelines for automated systems used on mine sites.
Events and Submissions/Topic
Module/Topic
Systems suitable for automation
Chapter
Identify principle hazards and systems where personnel can be removed from principle hazards
Review signals and communication systems and redundancy for improving safety
Events and Submissions/Topic
Module/Topic
Case study of mine automation system
Chapter
Review the introduction of an automated system at a mine site including, hazards, safety, productivity and costs.
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Case study of mine automation system
Chapter
Review the introduction of an automated system at a mine site, including hazards, safety, productivity and costs.
Review the introduction of an automated system at a mine site, including the social impacts of significant changes to the number of roles and role responsibilities.
Identify potential training requirements.
Events and Submissions/Topic
Module/Topic
Stakeholder management plan
Chapter
Review the stakeholder management plan for the case study.
Events and Submissions/Topic
Module/Topic
Propose a new automation system for an existing mining operation.
Chapter
Identify potential for improved safety, productivity and sustainability.
Events and Submissions/Topic
Module/Topic
Implementation Plan
Chapter
Develop an implementation plan including,
Data collection and control systems
Equipment requirements
Procedures
Events and Submissions/Topic
Module/Topic
Stakeholder management plan
Chapter
Develop a stakeholder management plan for a proposed automation system.
Review social impacts of significant changes to the number of roles and role responsibilities.
Identify potential training requirements.
Events and Submissions/Topic
Module/Topic
Presentation of the proposed mine automation system
Chapter
Events and Submissions/Topic
Module/Topic
Report preparation and submission.
Chapter
Events and Submissions/Topic
Report on Proposed automated system in mining Due: Week 12 Friday (7 Oct 2022) 11:55 pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Presentation
Present a proposal for a new automated system on a mine site. The proposal should cover equipment requirements, communications requirements, stakeholder management plan and an implementation plan.
The presentation will be held during class or online to allow students to receive feedback on their Case Study prior to submission of the case study report.
Marking and feedback will be completed using google docs on the day of the presentation.
No Assessment Criteria
- Research current legislation related to automation of resource systems
- Communication
- Critical Thinking
- Information Literacy
2 Case Study
Undertake a case study of an existing automated mining system such as production drilling or mine haul trucks.
Your case study should include a literature review and address the following topics,
- how the mine implemented the system
- the social impact of the system
- what changes to equipment and communications were required
- the impact on productivity and safety
Identify what could have been improved in implementing the automated system at the mine.
This assessment is designed to strengthen your understanding of automated mining systems. You will need to research how a mining operation implements an automated system at a mining operation.
To achieve this, you will need to:
- review the detailed assignment question found in Moodle
- check the marking criteria sheet found in Moodle
- review relevant literature and resources (textbooks, websites, etc.) to understand better the processes and procedures associated with automated systems
- research the primary literature to locate relevant current primary sources (scientific journal articles written in the last ten years)
- complete the case study in your own words making effective use of reliable sources of information
Your assignment should be produced electronically using word processing and spreadsheet software. Submit your work through the assessment link on Moodle.
Note: All submissions are processed through the similarity detection software, Turnitin. You must ensure that all of the work is your own, in line with University requirements. Correctly reference all sources of information using the CQU Harvard referencing style guide.
Week 8 Monday (5 Sept 2022) 11:59 pm AEST
Week 10 Monday (19 Sept 2022)
Structure
Cover Page showing unit code and name, student name and number, date, assignment number, lecturer, and university. An interesting picture related to the assignment work (cite and reference source). Correctly formatted table of contents, including a page for figures and tables. Include page headers and footers. State the assignment question at the beginning of your case study to give context to your report. Include a list of references at the end of the assignment.
Content
Where appropriate, include clearly labelled diagrams detailing such things as,
- the dimensions of equipment and excavations
- angles of slopes
- orebody thickness and overburden dimensions
- shapes of underground openings
- geometry of samples
Use clear and coherent sentences. Ensure photographs, pictures and diagrams are correctly labelled and introduced within the preceding text. Use in-text citations and correctly reference all sources of information. Include multiple references from journal papers from the CQU library (do not reference as a webpage). Use mining terminology correctly. A more detailed and specific marking criteria sheet will be available to download from within the assignment link on moodle.
- Design changes to a mine site to meet the signals and communication constraints required for automation
- Audit the design elements of an existing mining operation in terms of its compliance with safety, legislation and productivity
- Problem Solving
- Critical Thinking
- Information Technology Competence
3 Portfolio
The learning portfolio will allow students to reflect on and discuss what they are learning. It also allows them to record work and reading not presented for assessment as part of the submitted assignments. Crucially students are required to register and demonstrate evidence of all of the learning outcomes detailed for this unit, particularly teamwork, cultural sensitivity and ethical values. The learning portfolio will consist of two components,
- a study diary, including reflections
- evidence of learning outcomes
The submission link on moodle will have a learning portfolio template. Students are not expected to cite or reference work in this piece of assessment, as it is a workbook-style assessment that students will update weekly.
Week 12 Friday (7 Oct 2022) 11:59 pm AEST
Exam Week Friday (21 Oct 2022)
Make regular weekly entries in the study diary.
Record interactions that seem relevant to this unit. Interactions may be with the lecturer, other students and work colleagues. Interactions may be telephone conversations, e-mails, postings on forums, face to face meetings.
Collect and record evidence of how the learning outcomes for this unit have been met.
Submit updates of the learning portfolio with each assignment submission.
- Research current legislation related to automation of resource systems
- Design changes to a mine site to meet the signals and communication constraints required for automation
- Audit the design elements of an existing mining operation in terms of its compliance with safety, legislation and productivity
- Develop a stakeholder management plan to address community concerns related to the automation of a current mining operation
- Communicate the results of investigations via a professional level presentation and a written report.
- Communication
- Problem Solving
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
- Social Innovation
4 Report
Write a report proposing a new automated mining system for an existing mining operation.
Your report should include a literature review and address the following topics,
- an implementation plan
- a stakeholder management plan
- proposed changes to equipment and communications
- forecast impact on productivity and safety
Identify how the proposed automated system will be integrated into existing systems at the mine.
This assessment is designed to strengthen your understanding of automated mining systems. You will need to research a mining operation and its potential for implementing a new automated system.
To achieve this, you will need to:
- review the resources found in Moodle
- check the marking criteria sheet found in Moodle
- review relevant literature and resources (textbooks, websites, etc.) to understand better the systems, processes and procedures used at the mine
- research the primary literature to locate relevant current primary sources (scientific journal articles written in the last ten years)
- complete the report in your own words making effective use of reliable sources of information
Your assignment should be produced electronically using word processing and spreadsheet software. Submit your work through the assessment link on Moodle.
Note: All submissions are processed through the similarity detection software, Turnitin. You must ensure that all of the work is your own, in line with University requirements. Correctly reference all sources of information using the CQU Harvard referencing style guide.
Week 12 Friday (7 Oct 2022) 11:55 pm AEST
Exam Week Friday (21 Oct 2022)
Structure
Cover Page showing unit code and name, student name and number, date, assignment number, lecturer, and university. An interesting picture related to the assignment work (cite and reference source). Correctly formatted table of contents, including a page for figures and tables. Include page headers and footers. An executive summary or abstract at the beginning of your report. Include a list of references at the end of the assignment. Use appendices where appropriate.
Content
Where appropriate, include clearly labelled diagrams detailing such things as,
- the dimensions of equipment and excavations
- angles of slopes
- orebody thickness and overburden dimensions
- shapes of underground openings
- geometry of samples
Use clear and coherent sentences. Ensure photographs, pictures and diagrams are correctly labelled and introduced within the preceding text. Use in-text citations and correctly reference all sources of information. Include multiple references from journal papers from the CQU library (do not reference as a webpage). Use mining terminology correctly. A more detailed and specific marking criteria sheet will be available to download from within the assignment link on moodle.
- Develop a stakeholder management plan to address community concerns related to the automation of a current mining operation
- Communicate the results of investigations via a professional level presentation and a written report.
- Communication
- Critical Thinking
- Information Literacy
- Team Work
- Information Technology Competence
- Cross Cultural Competence
- Ethical practice
- Social Innovation
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.