CQUniversity Unit Profile

In Progress

Please note that this Unit Profile is still in progress. The content below is subject to change.
ENEX12001 Electrical Power and Machines
Electrical Power and Machines
Save or Print as PDF
All details in this unit profile for ENEX12001 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

In this unit, you will model basic power system components and electrical machines using simplified linear equivalent circuits. You will explain the relationship between power and energy, and calculate power and energy in power networks and electrical machines. You will apply problem-solving techniques in the analysis of balanced three-phase power circuits using per-unit methodology. You will also investigate and compare the construction and operational characteristics of direct current (DC) and alternating current (AC) electrical machines. You will explain different drive system topologies for the electrical machines. You will explain electrical machine protection and control schemes. In this unit, you must complete compulsory practical activities. Refer to the Engineering Undergraduate Course Moodle site for proposed dates.

Details

Career Level: Undergraduate
Unit Level: Level 2
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Prerequisite: (ENEG11009 Fundamentals of Energy and Electricity or PHYS11185 Engineering Physics B) AND MATH11218 Applied Mathematics.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 2 - 2023

Mackay
Mixed Mode

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Residential Schools

This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.

Website

This unit has a website, within the Moodle system, which is available two weeks before the start of term. It is important that you visit your Moodle site throughout the term. Please visit Moodle for more information.

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Regional Campuses
Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Metropolitan Campuses
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Written Assessment
Weighting: 20%
2. Online Quiz(zes)
Weighting: 25%
3. Practical and Written Assessment
Weighting: 25%
4. Online Test
Weighting: 30%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.

CQUniversity Policies

All University policies are available on the CQUniversity Policy site.

You may wish to view these policies:


This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from In class student feedback

Feedback

Students appreciated the amount of support and help they have recieved from the unit coordinator throughout the term.

Recommendation

Maintain this good practice in future offerings.

Feedback from Unit Coordinator

Feedback

The difficulty of online quiz questions should be moderated according to the unit contents.

Recommendation

In future offerings, revisit the online quiz question bank and adjust the difficulty of the questions according to the class activities, and unit contents, especially to the tutorial workings.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Model basic power system components and machines using simplified linear equivalent circuits
  2. Explain the relationship between power and energy; calculate power and energy in power networks and electrical machines
  3. Compare and explain features of DC and AC electrical machines with regard to their construction and operational characteristics
  4. Compare and explain features of drive systems, protection and control schemes for electric machines
  5. Apply appropriate laboratory techniques and software tools to understand power systems and electrical machines
  6. Create professional documentation of the solutions, designs and analysis processes using electrical terminology, diagrams and symbols that conform to Australian or International Standards
  7. Work individually and collaboratively in a team to produce high-quality outputs.

The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:

Introductory
1.4 Discernment of knowledge development and research directions within the engineering discipline. (LO: 1N 2N 3N 4N 5N )
1.5 Knowledge of engineering design practice and contextual factors impacting the engineering discipline. (LO: 4N )

Intermediate
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 1I 2I 3I 4I 5I )
1.6 Understanding of the scope, principles, norms, accountabilities and bounds of sustainable engineering practice in the specific discipline. (LO: 3I 4I 5I )
2.1 Application of established engineering methods to complex engineering problem solving. (LO: 1I 2I 3I 4I 5I )
3.1 Ethical conduct and professional accountability. (LO: 6I 7I )
3.2 Effective oral and written communication in professional and lay domains. (LO: 3I 4I 5I )
3.3 Creative, innovative and pro-active demeanour. (LO: 5I 6I 7I )

Advanced
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 1I 2I 3A 4A 5I )
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 1I 2A 3A 4A 5A )
2.2 Fluent application of engineering techniques, tools and resources. (LO: 2A 3A 4A 5A )
3.4 Professional use and management of information. (LO: 1A 2A 3A 4A 5A 6A )
3.5 Orderly management of self, and professional conduct. (LO: 5A 6A 7A )
3.6 Effective team membership and team leadership. (LO: 5A 6A 7A )

Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate and A - Advanced.

Refer to the Engineering Undergraduate Course Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information
https://moodle.cqu.edu.au/course/view.php?id=1511

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment - 20%
2 - Online Quiz(zes) - 25%
3 - Practical and Written Assessment - 25%
4 - Online Test - 30%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures
Textbooks and Resources

Textbooks

Prescribed

Electrical machines, drives and power systems

6th edn - new international edition (2013)
Authors: Wildi, T
Pearson Education
Upper Saddle River Upper Saddle River , NJ , USA
Binding: Paperback
View textbooks at the CQUniversity Bookshop

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
Academic Integrity Statement

Information for Academic Integrity Statement has not been released yet.

This unit profile has not yet been finalised.