Overview
This unit develops skills required for conducting an audit in a maintenance organisation. The unit focuses on the application of an audit methodology for the evaluation and development of an organisation's maintenance management system. Students will establish benchmarking criteria for a maintenance organisation and critique the methodology for auditing industrial maintenance functions.
Details
Pre-requisites or Co-requisites
Prerequisites: ENMM20023, ENMM20025, ENMM20029 & ENMM20024
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2020
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Have your say
More frequent face-to-face Zoom sessions needed.
More frequent Zoom session opportunities will be looked at to enhanced students learning experience and also students will be frequently reminded to attend the sessions.
Feedback from Have your say
Simplified assessment tasks and requirements.
Assessment tasks and requirements will be reviewed and checked for further simplification without compromising the quality and standard of the assessment.
Feedback from Have your say
Assessment submission and return date.
Assessment submission dates need to be checked and balanced if possible and also submission of assessments need to be on time.
- Critique the methodology for auditing industrial maintenance functions.
- Evaluate audit procedures.
- Analyse an audit report of an organisation’s maintenance objectives, strategy and workload.
- Develop a full audit report.
- Establish bench marking criteria in a maintenance organisation
n/a
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Written Assessment - 20% | |||||
2 - Written Assessment - 70% | |||||
3 - Presentation - 10% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | ||||
---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | |
1 - Knowledge | |||||
2 - Communication | |||||
3 - Cognitive, technical and creative skills | |||||
4 - Research | |||||
5 - Self-management | |||||
6 - Ethical and Professional Responsibility | |||||
7 - Leadership | |||||
8 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Written Assessment - 20% | ||||||||
2 - Written Assessment - 70% | ||||||||
3 - Presentation - 10% |
Textbooks
There are no required textbooks.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Learning guide in the form of a Moodle book uploaded on the moodle web page
- Online lecture sessions via Zoom
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
m.uddin@cqu.edu.au
s.sharma2@cqu.edu.au
Module/Topic
Module-1
Business centered maintenance and its application to maintenance Auditing
Chapter
Topic 1 and complete the review questions at the end of the module
Events and Submissions/Topic
Online lecture via Zoom session date and time will be announced - Visit the Moodle web page and look for the Zoom session announcements.
Module/Topic
Module-1
Business centered maintenance and its application to maintenance Auditing
Chapter
Read Module 1, Topic 2, and complete the review questions at the end of the module.
Events and Submissions/Topic
Review all chapters and ask questions in the zoom session.
Module/Topic
Module-1
Business centered maintenance and its application to maintenance Auditing
Chapter
Read Module 1, Topic 3, and complete the review questions at the end of the module.
Events and Submissions/Topic
Forum activities
Module/Topic
Module-1
Business centered maintenance and its application to maintenance auditing
Chapter
Read Module 1, Topic 4, and complete the review questions at the end of the module.
Events and Submissions/Topic
Assignment-1 due Monday next week, ask questions during the Zoom session.
Module/Topic
Module-2
Examples of full, snapshot and fingerprint audits
Chapter
Read Module 2, Topic 5, and complete the review questions at the end of the module.
Assignment 1 due this week.
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Module-2
Examples of full, snapshot and fingerprint audits
Chapter
Read Module 2, Topic 6, and complete the review questions at the end of the module. Assignment due this week.
Events and Submissions/Topic
Group discussions and forum activities
Module/Topic
Module-3
Case studies of the application of the auditing procedure to a
variety of industries
Chapter
Read Module 3, Topic 7, and complete the review questions at the end of the module.
Events and Submissions/Topic
Forum activities.
Module/Topic
Module-3
Case studies of the application of the auditing procedure to a
variety of industries
Chapter
Read Module 3, Topic 8, and complete the review questions at the end of the module.
Events and Submissions/Topic
Assignment due Monday next week ask questions in the Zoom session.
Module/Topic
Module-3
Case studies of the application of the auditing procedure to a
variety of industries
Chapter
Read Module 3, Topic 9, and complete the review questions at the end of the module.
Events and Submissions/Topic
Group discussion
Module/Topic
Module-3
Case studies of the application of the auditing procedure to a
variety of industries
Chapter
Read Module 3, Topic 10, and complete the review Topic 10 and complete the review questions at the end of the module.
Events and Submissions/Topic
Forum activities
Assessment 2 due next week.
Module/Topic
Module-2
Examples of full, snapshot and fingerprint audits
Chapter
Read Module 2, Topic 11, and complete the review questions at the end of the module.
Written Assessment-2- Mini-Project submission this week
Events and Submissions/Topic
Discuss assignment
Module/Topic
Module-2
Examples of full, snapshot and fingerprint audits
Chapter
Read Module 2, Topic 12, and complete the review questions at the end of the module.
Events and Submissions/Topic
Assignment due Monday next week ask questions in the zoom session.
Written Assessment-2, Due: Week 12 Monday (1 June 2020) 11:55 pm AEST
Module/Topic
Chapter
Written Assessment Assignment-3- Presentation is due this week
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
The assignment question/s will be uploaded on the Moodle web page of this unit two weeks prior to start of the term. This assessment relates to Module 1, of this unit. Some of the required information may be difficult to obtain due to its confidential nature. If this is the case the information can be change by a factor to maintain relevance yet provide the confidentiality required, or information may also need to be obtained through interviews or estimations. The objectives of this assignment is to :
· Check your understanding of practical application of theoretical information
- Develop understanding of maintenance theory and introduce techniques to relate theory to practical application
· Introduce and develop multi-literacy skills through the concept of assignment writing, referencing and submission
· Collect data on current performance of the maintenance organisation within the company targeted in the assignment, so as to assist with the application of the audit process (assignment 3)
Your assignment is to be submitted in ‘report format.’ You will find an ‘example assignment report template’ in your Module 1. Use standard format for choosing a file name of your assignment.
Please note that the assignment has a word limit and is subjected to penalty.
There are 3 questions in this assignment These are available on Moodle website.
For further information please visit the Moodle Website of this course.
Week 5 Monday (6 Apr 2020) 11:55 pm AEST
Use standard file name format, Example –Smith_J_ENMM20032_Ass1.doc
Week 6 Monday (20 Apr 2020)
In case theer is a delay, please keep in contact with the Unit coordinator
Marks for each part of question will be available from the moodle website.
However, the following assessment criteria will be used for marking the
assignment:
- Demonstration of knowledge and understanding of concepts
- Evidence of research beyond own experience and course
- Clarity of expression, including use of terminology, ease of reading, spelling and grammar, orderly and logical presentation and use of
- diagrams to illustrate points.
- Quality of technical presentation including neatness, appropriate use of figures and tables and references.
- Use of correct and accurate referencing.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Critique the methodology for auditing industrial maintenance functions.
- Evaluate audit procedures.
- Analyse an audit report of an organisation’s maintenance objectives, strategy and workload.
- Develop a full audit report.
- Establish bench marking criteria in a maintenance organisation
2 Written Assessment
The assignment question/s will be uploaded on the Moodle web page of this unit two weeks prior to start of the term.
This assignment has 2 questions (Question 1 and Question 2). In question 1 it has 14 elements (a to n) and which relate to Module 1 to 11 of the Learning Guide. Question 2 asks to make recommendations for a revised maintenance organisation that will address the short comings identified in question 1.
This assignment draws on the learnings from the 4 units in the Maintenance management certificate program. In particular, the methodologies used in the collection, display and analysis of relevant information. The objectives of the assignment are to:
·Check your understanding on the practical applications of the collection, display and analysis of data that relates to the maintenance function
· Explore cause and effects options within and between the analysed elements
· Analyse the causes and develop solutions to asset and maintenance management problems
· Develop a prioritised action list based on analysis of the data and in line with best practice
· Develop multi-literacy skills through reflection, written communication and referencing
Week 12 Monday (1 June 2020) 11:55 pm AEST
Use standard file name format, Example –Smith_J_ENMM20032_Ass2.doc
Marks of this assignment will be posted on the moodle only after the moderation meeting
This is a criterion-based assessment item. Please note that it is highly
recommended that you read beyond the course materials to complete assessment
items. Your submission for this assessment will be evaluated by the following
criteria:
- Demonstration of knowledge and understanding of concepts.
- Evidence of research beyond own experience and course
- Clarity of expression, including use of terminology, ease of reading, spelling
and grammar, orderly and logical presentation and use of diagrams to
illustrate points.
- Quality of technical presentation including neatness, appropriate use of
figures and tables and references.
- Use of correct and accurate referencing.
For further information and marking guide please visit Moodle web site.
Please note that the assignment has a word limit and is subjected to penalty.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
- Critique the methodology for auditing industrial maintenance functions.
- Evaluate audit procedures.
- Analyse an audit report of an organisation’s maintenance objectives, strategy and workload.
- Develop a full audit report.
- Establish bench marking criteria in a maintenance organisation
3 Presentation
The assignment will be uploaded on the moodle web page of this course
two weeks prior to start of the term. This assignment requires the preparation of a power Point slides presentation of your mini-project. It should be aimed at senior management for the purpose of gaining support for your recommendations it should last approx. 15 min duration. Slides should show key points with speaker notes provide the information used to speak to each point.
The objectives of Assignment 2 are also to:
- Develop multi-literacy skills including reflection, communication and presentation skills
- Prepare a PowerPoint Presentation
Be sure to clearly and accurately reference other’s ideas, words, figures/tables etc. in accordance with the CQUniversity’s Harvard referencing guide.
Review/Exam Week Monday (8 June 2020) 11:55 pm AEST
When saving your assignments for submission on Moodle please ensure you use the following file format: example: John Smith_S000111_ENMM20032_Assignment_3.doc
Marks posted on the moodle will be subjected to moderation process.
This is a criterion-based assessment item. Please note that it is highly
recommended that you read beyond the course materials to complete assessment
items. Your submission will be evaluated by the following criteria:
- Selection of problem, description of problem and supporting evidence.
- Plan for the solution of the problem, including selection of relevant
techniques and use of resources.
- application of analysis to the problem.
- Conclusion.
- Quality of technical presentation including neatness of presentation,
- appropriate use of figures and tables and referencing.
- overall PowerPoint Presentation.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Leadership
- Analyse an audit report of an organisation’s maintenance objectives, strategy and workload.
- Develop a full audit report.
- Establish bench marking criteria in a maintenance organisation
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.