Overview
Technical Mathematics for University is designed to follow on from Intermediate Mathematics for University. The completion of both Intermediate Mathematics for University and Technical Mathematics for University will prepare you for first year tertiary mathematics in applied science and engineering. The unit will provide you with knowledge of various mathematical topics, including algebra techniques; trigonometric functions, ratios, and graphs; plane and analytical geometry; introductory vectors and introductory calculus.
Details
Pre-requisites or Co-requisites
Students need to complete MATH40228 Intermediate Mathematics for University to enrol in this unit
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2024
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Non-award unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Unit feedback
Students would appreciate more options for Zoom times.
Include a second, optional timeslot for a Zoom tutorial in the timetable listed on Moodle.
Feedback from Lecturer
Students appreciate individual support.
Continue to offer phone support and encourage students to phone or ask for a return phone call if having trouble.
- Reflect on formative assessment to improve mathematical comprehension
- Analyse information using mathematical techniques
- Communicate mathematical solutions logically and clearly
- Use mathematical concepts and techniques including algebra techniques; trigonometric functions, ratios, and graphs; plane and analytical geometry; introductory vectors and introductory calculus
- Apply appropriate mathematical techniques
- Develop solutions to applied mathematical problems.
N/A
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Written Assessment - 0% | ||||||
| 2 - Written Assessment - 30% | ||||||
| 3 - Written Assessment - 30% | ||||||
| 4 - Examination - 40% | ||||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Self Management | ||||||
| 2 - Communication | ||||||
| 3 - Information Literacy | ||||||
| 4 - Information Technology Competence | ||||||
| 5 - Problem Solving | ||||||
| 6 - Critical Thinking | ||||||
| 7 - Cross-Cultural Competence | ||||||
| 8 - Ethical Practice | ||||||
| 9 - Aboriginal and Torres Strait Islander Cultures | ||||||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| 1 - Written Assessment - 0% | |||||||||
| 2 - Written Assessment - 30% | |||||||||
| 3 - Written Assessment - 30% | |||||||||
| 4 - Examination - 40% | |||||||||
Textbooks
Technical Mathematics for University
Edition: 5 (2020)
Authors: School of Access Education
CQUniversity Publishing Unit
Rockhampton Rockhampton , QLD , Australia
ISBN: N/A
The textbook for Technical Mathematics for University (MATH40252) is available on the unit Moodle site; however, we strongly advise you to print out your own copy. You may like a hard copy to complete activities and take notes. The textbook cannot be purchased from the CQUniversity Bookshop. Your Access Coordinator will provide you with advice on printing options.
Binding: Spiral
The textbook for Technical Mathematics for University (MATH40252) is available on the unit Moodle site; however, we strongly advise you to print out your own copy. You may like a hard copy to complete activities and take notes. The textbook cannot be purchased from the CQUniversity Bookshop. Your Access Coordinator will provide you with advice on printing options.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Computer - ability to access study materials, including instructional videos & scan and upload assessment
- Microsoft Office or similar
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
m.dzator@cqu.edu.au
Module/Topic
Additional Topics in Algebra
Chapter
ALGX
Events and Submissions/Topic
Module/Topic
Trigonometric Functions and Ratios
Chapter
TRFN
Events and Submissions/Topic
ALGX Module Review: Due Week 2 Monday (15 July 2024) 11:45pm AEST
Module/Topic
Graphs of Trigonometric Functions
Chapter
TRGR
Events and Submissions/Topic
TRFN Module Review: Due Week 3 Monday (22 July 2024) 11:45pm AEST
Module/Topic
Analytic Geometry
Chapter
AGEO
Events and Submissions/Topic
TRGR Module Review: Due Week 4 Monday (29 July 2024) 11:45pmAEST
Module/Topic
Introduction to Vectors
Chapter
VECT
Events and Submissions/Topic
AGEO Module Review: Due Week 5 Tuesday (5 August 2024) 11:45pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Revision
Chapter
Events and Submissions/Topic
VECT Module Review: Due Week 6 Monday (19 August 2024) 11:45pm AEST
Module/Topic
Introductory Differentiation
Chapter
DIFF
Events and Submissions/Topic
Module/Topic
Introductory Differentiation
Chapter
DIFF
Events and Submissions/Topic
Module/Topic
Introduction to Integration
Chapter
INTG
Events and Submissions/Topic
DIFF Module Review: Due Week 9 Monday (9 September 2024) 11:45pm AEST
Module/Topic
Introduction to Integration
Chapter
INTG
Events and Submissions/Topic
Module/Topic
Revision
Chapter
Events and Submissions/Topic
INTG Module Review: Due Week 11 Monday (23 September 2024) 11:45pm AEST
Module/Topic
Revision
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Examination: The date and time of the examination will be available through MyCQU approximately six weeks before the examination period.
Unit Coordinator
Dr Michael Dzator
Phone: 07 4940 7451
Email: m.dzator@cqu.edu.au
Location: Mackay Ooralea Campus
1 Written Assessment
At the conclusion of each module, complete the corresponding Module Review (available from the unit Moodle site). The Module Reviews are formative and must be completed individually. The purpose of Module Reviews is to help monitor your progress throughout the term, allowing you to identify concepts that you may need to review. You must achieve a total of at least 50% across the seven Module Reviews in order to pass this assessment, and because this is a pass/fail assessment, you must pass this assessment in order to be eligible to pass the unit.
Module Reviews are due on the day and week specified in the Unit Profile Schedule. A more detailed version of this schedule can be found on the unit Moodle site.
The Module Reviews will be marked and returned via Moodle within 10 days of the due date or the submission date, whichever is later.
Marks for each question will be allocated for the following:
- using appropriate setting out
- showing all correct steps in the solution
- answering the question asked, where appropriate
- finding the correct answer.
- Reflect on formative assessment to improve mathematical comprehension
- Analyse information using mathematical techniques
- Communicate mathematical solutions logically and clearly
- Use mathematical concepts and techniques including algebra techniques; trigonometric functions, ratios, and graphs; plane and analytical geometry; introductory vectors and introductory calculus
- Apply appropriate mathematical techniques
- Develop solutions to applied mathematical problems.
- Self Management
- Communication
- Problem Solving
- Ethical Practice
2 Written Assessment
Assignment 1 is a non-supervised assignment and must be completed individually. This assignment is compulsory and covers the first 5 modules of the unit: ALGX, TRFN, TRGR, AGEO and VECT. Assignment 1 will be made available at the end of Week 3 on the unit Moodle site.
Week 7 Monday (26 Aug 2024) 11:45 pm AEST
Assignment 1 will be marked and returned via the unit Moodle site within two weeks of the due date or date submitted, whichever is later.
Marks for each question will be allocated for the following:
- using appropriate setting out
- showing all correct steps in the solution
- answering the question asked, where appropriate
- finding the correct answer.
- Analyse information using mathematical techniques
- Communicate mathematical solutions logically and clearly
- Use mathematical concepts and techniques including algebra techniques; trigonometric functions, ratios, and graphs; plane and analytical geometry; introductory vectors and introductory calculus
- Apply appropriate mathematical techniques
- Develop solutions to applied mathematical problems.
- Self Management
- Communication
- Problem Solving
- Ethical Practice
3 Written Assessment
Assignment 2 is a non-supervised assignment and must be completed individually. This assignment is compulsory and covers the modules DIFF and INTG. Assignment 2 will be made available at the end of Week 8 on the unit Moodle site.
Week 12 Monday (30 Sept 2024) 11:45 pm AEST
Assignment 2 will be marked and returned via the unit Moodle site within two weeks of the due date or date submitted, whichever is later.
Marks for each question will be allocated for the following:
- using appropriate setting out
- showing all correct steps in the solution
- answering the question asked, where appropriate
- finding the correct answer
- Analyse information using mathematical techniques
- Communicate mathematical solutions logically and clearly
- Use mathematical concepts and techniques including algebra techniques; trigonometric functions, ratios, and graphs; plane and analytical geometry; introductory vectors and introductory calculus
- Apply appropriate mathematical techniques
- Develop solutions to applied mathematical problems.
- Self Management
- Communication
- Problem Solving
- Ethical Practice
Examination
Calculator - all non-communicable calculators, including scientific, programmable and graphics calculators are authorised
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
