Overview
This unit will expand on your prior study of x-ray equipment and imaging processes of specialised imaging technologies. The primary focus of the unit is on the technical fundamentals (both theoretical and practical) of Computed Tomography to enable safe and effective scan technique. You will examine in detail the equipment operation of computed tomography and its processes such as data acquisition, processing, reconstruction and display. You will further explore dose and image optimisation strategies and quality assurance testing, including image artefacts. You will also be introduced to the physical and operational principles of advanced and/or newly emerging medical imaging modalities such as angiography, magnetic resonance imaging, ultrasound imaging, nuclear medicine imaging, positron emission tomography CT, EOS and spectral CT.
Details
Pre-requisites or Co-requisites
Pre-requisites MEDI11006 Imaging Science 1 MEDI12002 Imaging Science 2 MEDI12005 Imaging Science 3 MEDI12011 Medical Imaging Clinical Experience 1
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2026
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Teaching team reflection
The Practical CT Equipment Use assessment encourages a high level of attendance at CT lab activities and ensures application of the CT theoretical knowledge obtained through weekly content.
Maintain the inclusion of the CT Practical Equipment Use assessment to encourage student engagement and application of CT skills with the CT equipment on-campus.
Feedback from Unit Coordinator & Team reflection
The Weeks 5 & 9 online tests assess the science and instrumentation of CT scanning, and the final supervised in-class test in Week 13 assesses this same content to a lesser extent with a focus on the 7 other imaging modalities covered in the latter part of the term. As CT is a vital component of the course accreditation Professional Capabilities requirements, the CT theoretical knowledge would be better assessed by changing the Week 9 test to a supervised in-class test to reflect the factual CT knowledge required by graduates in meeting accreditation standards.
Investigate the modification of the unit assessment strategy by changing the Week 9 Online Quiz to a supervised in-class test to best assess students' CT knowledge, and change the final assessment from an in-class test to an online quiz to assess the knowledge of the 7 additional imaging modalities that include new and emerging technologies.
- Discuss processes such as data acquisition, processing, image reconstruction, reformatting, display, quality assurance testing and artefacts in computed tomography.
- Operate computed tomography equipment, with consideration to patient dose, image quality and equipment conservation.
- Apply underlying knowledge to manipulate multi-planar and three-dimensional (3D) data sets in computed tomography.
- Discuss the design, operational features and clinical safety considerations of computed tomography (CT).
- Discuss the design, operational features and clinical safety considerations of advanced medical imaging modalities such as angiography, magnetic resonance imaging, ultrasound imaging, nuclear medicine imaging, positron emission tomography CT (PETCT), EOS and spectral CT.
This unit maps to the following components of the Medical Radiation Practice Board of Australia's Professional Capabilities for Medical Radiation Practice (2020 version):
- Domain 1A
- capability 3, enabling components a & f
- Domain 5
- capability 1, enabling components a-d & f
- capability 2, enabling component e
- capability 3, enabling component a-c
- capability 4, enabling component a & c
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Laboratory/Practical - 0% | |||||
| 2 - In-class Test(s) - 20% | |||||
| 3 - In-class Test(s) - 50% | |||||
| 4 - In-class Test(s) - 30% | |||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Communication | |||||
| 2 - Problem Solving | |||||
| 3 - Critical Thinking | |||||
| 4 - Information Literacy | |||||
| 5 - Team Work | |||||
| 6 - Information Technology Competence | |||||
| 7 - Cross Cultural Competence | |||||
| 8 - Ethical practice | |||||
| 9 - Social Innovation | |||||
| 10 - Aboriginal and Torres Strait Islander Cultures | |||||
Information for Textbooks and Resources has not been released yet.
This information will be available on Monday 16 February 2026As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
