Overview
In Exposures and Health Risk you will use current methods to analyse contemporary issues in occupational health and hygiene. The unit content will emphasise the role of toxicology, the nature of illness and injury caused by exposure to hazards and practical ways to assess risk. You will develop practical solutions for the advanced elimination and risk management of occupational health and hygiene hazards. On successful completion of this unit, you will be able to use a systems oriented approach to apply your knowledge to new issues of health risk as they arise in the workplace.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 2 - 2018
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Self reflection/student feedback
The assessment title "portfolio" has a quiz component. This would be easier for students if it was its own assessment item.
Increase the number of assessments from 2 to 3 to reflect the different assessment components.
- Analyse actual occupational health cases and demonstrate individual initiative and effective teamwork skills in problem solving.
- Apply a systems approach to complex problem solving in diverse occupational health environments.
- Apply the principles of critical assessment of severity and urgency in occupational health.
- Evaluate problems in occupational health, including indoor and outdoor environments.
- Research and evaluate toxicology and the principles of the monitoring of place and person.
- Appraise current knowledge of the nature of illness and injury associated with exposure to certain hazards.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Written Assessment - 40% | ||||||
2 - Group Work - 40% | ||||||
3 - Online Quiz(zes) - 20% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Knowledge | ||||||
2 - Communication | ||||||
3 - Cognitive, technical and creative skills | ||||||
4 - Research | ||||||
5 - Self-management | ||||||
6 - Ethical and Professional Responsibility | ||||||
7 - Leadership | ||||||
8 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Written Assessment - 40% | ||||||||
2 - Group Work - 40% |
Textbooks
There are no required textbooks.
Additional Textbook Information
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
r.kift@cqu.edu.au
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Prescribed readings
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Information Booklet Due: Week 12 Monday (1 Oct 2018) 11:45 pm AEST
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
1 Written Assessment
The lecturer will give you a list of real case studies. You are to choose one and identify one hazard that is a chemical hazard and one hazard that is a biological hazard.
You will be required to:
- Identify all potential health and hygiene realted hazards in this case study.
- Identify the two hazards that the report will focus on including the class of hazard that they are (one must be a chemical hazard and one biological).
- Explain what the routes of exposure are and the states of matter (if relevant) that the hazard occurs as.
- Explain why the hazard presents a risk to workers’ health. This section must be justified using the literature such as legislation, texts and journal articles. You may include information about the toxicology of the chemicals, exposure, acute and chronic health effects as well as the health effects to workers and to industry as a whole.
- Describe the different ways that the hazards would be monitored and analysed. This must be related to the case study given and include information about the standard methodology that is used for both the monitoring techniques and comparison of the findings against a benchmark or standard. You must include information about how the sampling and analysis would actually be carried out for each hazard.
- Describe the relevant Legislation, Codes and Standards which apply to these hazards and the issues involved with meeting these requirements.
- Use the hierarchy of control to outline the ways that the hazards can be controlled.
The report should be written as a Consultant might write to a Client.
Length- 3000 words
Week 8 Monday (3 Sept 2018) 11:45 pm AEST
Week 10 Monday (17 Sept 2018)
This assessment will be graded with the following criteria:
- Correctly identifies all possible hazards, explains the route of exposure for the two selected hazards (15%)
- Explains exposure and effect, and describes the potential health effects (20%)
- Describes the way that you would carry out monitoring for the hazards (15%)
- Outlines relevant legislative requirements and identifies the issues of compliance (15%)
- Proposes appropriate control measures (15%)
- Report structure and presentation including referencing (20%)
- Apply a systems approach to complex problem solving in diverse occupational health environments.
- Apply the principles of critical assessment of severity and urgency in occupational health.
- Evaluate problems in occupational health, including indoor and outdoor environments.
- Research and evaluate toxicology and the principles of the monitoring of place and person.
- Appraise current knowledge of the nature of illness and injury associated with exposure to certain hazards.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
2 Group Work
Working as a group you are required to develop a booklet on one physical hazard. You will be required to design a technical information/educational information booklet with the main emphasis of the assignment on the quality of the content presented:
Your assignment should include (but not be restricted to):
- Introduction to the workplaces where the exposure occurs, important factors and specific concepts related to the working environment and exposure. In this section you are to make it clear who the target audience for this booklet is.
- The physics/chemical breakdown of the hazard (what it is) and its relationship to the related health effects, mechanisms of injury and inpact (a literature based discussion with references).
- An explanation of the health effects of exposure, its manifestation and progression. Draw on theoretical sources such as journal articles, website, documents etc. (reference and acknowledge all sources).
- The monitoring techniques, equipment, methodologies, benchmarks and standards that should be used in relation to the evaluation of the hazards. This section should be supported by information from a variety of sources.
- Describe the relevant Legislation, Codes and Standards which apply to the hazard and the issues involved with meeting these requirements.
- Control (using the hierarchy of control) and containment measures that could be introduced to reduce workplace exposure and prevent the occurrence of the adverse health effects or reducing its severity (all suggestions referenced).
Bear in mind that this Unit has an emphasis on the evaluation of occupational hazards, utilising standards, accepted methodologies, specialised equipment and benchmarks, so it is expected that your information booklet will focus on developing an accurate, useful, and technically detailed information source that will cover the aspects mentioned previously. You are encouraged to use graphics and other relevant resources in order to develop a visually appealing yet informative resource.
Ensure you reference and acknowledge all sources of information, graphics, etc. You may use Harvard, Vancouver or another recognised referencing style for this assessment.
Length- 12 pages max (inclusive of all pages).
You will be assigned a group and allocated a physical hazard in Week 7 this will be communicated via the Moodle page.
You will be required to assess each team members' (including your own) performance. This will occur via the Moodle site after the submission of the group assignment. The average mark received from this assessment will be used to scale the group mark.
Week 12 Monday (1 Oct 2018) 11:45 pm AEST
Exam Week Monday (15 Oct 2018)
This booklet will be graded with the following criteria
- Identifies and explains the background to the hazard to be covered, including the identification of the workplaces where exposure can be an issue (15%)
- Explains exposure and effect, and describes the potential health effects (20%)
- Describes the way that you would carry out monitoring for the hazards (20%)
- Outlines relevant legislative requirements and identifies the issues of compliance (10%)
- Proposes appropriate control measures (15%)
- Booklet structure and presentation including referencing (20%)
- Analyse actual occupational health cases and demonstrate individual initiative and effective teamwork skills in problem solving.
- Apply a systems approach to complex problem solving in diverse occupational health environments.
- Research and evaluate toxicology and the principles of the monitoring of place and person.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
3 Online Quiz(zes)
In week 6 and in week 12 you will be required to access a Moodle quiz. (20% of total marks, 10% for each quiz)
Each quiz will be based on the information that has been covered in lectures until (and including) that week.
2
Other
Week 6 quiz will close at 11:45pm on 26/08/18. Week 12 quiz will close at 11:45pm on 09/10/18
Marks will be awarded for correct answers
- Apply the principles of critical assessment of severity and urgency in occupational health.
- Evaluate problems in occupational health, including indoor and outdoor environments.
- Appraise current knowledge of the nature of illness and injury associated with exposure to certain hazards.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.