Overview
This unit is the second of two in the Safety Science Thesis suite of units. During this unit you will learn about the process of conducting safety science research by executing your research plan (post ethics approval) from Thesis 1, that is, data collection and analysis, writing and presenting your research findings to a wider audience. You will also be able to engage with your peer researchers as they progress through their research journey.
Details
Pre-requisites or Co-requisites
Prerequisite: SAFE20022
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2017
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Residential Schools
This unit has a Compulsory Residential School for distance mode students and the details are:
Click here to see your Residential School Timetable.
Recommended Student Time Commitment
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a pass/fail (non-graded) unit. To pass the unit, you must pass all of the individual assessment tasks shown in the table above.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
- Undertake and write an extensive literature review on a topic of safety science.
- Conduct research (supported by ethics committee approval) that uses appropriate research methods and data analysis techniques to address research questions.
- Discuss the implications of the research project for theory and practice in safety science.
- Demonstrate an in-depth knowledge of a topic in safety science.
This is the second unit of two research thesis units and is designed to complete the foundational
work that students carried out in Thesis 1. The two Thesis units are designed to introduce students to
the process of conducting research, enabling them to carry out an independent research study. In Thesis
2 the students will continue to work with their allocated supervisor who will support them in the conduct of
their research, the undertaking of an extensive literature review and assist in the preparation of a final
piece of work which can deliver the student's research findings to a wider audience. Students will also be
able to continue to discuss the unit content and their research progress with their fellow peer
researchers through Moodle site discussion groups.
Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Written Assessment - 0% | ||||
2 - Presentation and Written Assessment - 0% |
Alignment of Graduate Attributes to Learning Outcomes
Graduate Attributes | Learning Outcomes | |||
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1 - Knowledge | ||||
2 - Communication | ||||
3 - Cognitive, technical and creative skills | ||||
4 - Research | ||||
5 - Self-management | ||||
6 - Ethical and Professional Responsibility | ||||
7 - Leadership | ||||
8 - Aboriginal and Torres Strait Islander Cultures |
Alignment of Assessment Tasks to Graduate Attributes
Assessment Tasks | Graduate Attributes | |||||||
---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
1 - Written Assessment - 0% | ||||||||
2 - Presentation and Written Assessment - 0% |
Textbooks
There are no required textbooks.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
- Zoom account (Free)
All submissions for this unit must use the referencing style: Harvard (author-date)
For further information, see the Assessment Tasks.
s.dell@cqu.edu.au
Module/Topic
Discussion of expectations for this unit.
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Vacation Week
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Student - supervisor discussion as required
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Students will be required to attend a weekly zoom meeting with their supervision team (generally 20 to 30 minutes per week). Generally this will involve three to four staff including a meeting coordinator. Students will be required to keep minutes of this meeting and share them with the team prior to the next scheduled meeting.
1 Written Assessment
Students will undertake a comprehensive literature review in relation to their chosen subject area.
Week 8 Friday (5 May 2017) 11:45 pm AEST
Week 10 Friday (19 May 2017)
Assessment is based on:
- the level of critical discussion of the literature;
- the quality of the narrative of the review;
- the extent to which the literature review answers important questions; and
- the clarity of writing and organisation of material.
- Undertake and write an extensive literature review on a topic of safety science.
- Demonstrate an in-depth knowledge of a topic in safety science.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
2 Presentation and Written Assessment
Students will carry out their research projects as per plans determined in Thesis 1 and consultation with their project supervisors. Students will then write up their research project in the form of a manuscript worthy of being published. Further details of this assessment will be available in Moodle.
Week 12 Friday (2 June 2017) 11:45 pm AEST
Exam Week Friday (16 June 2017)
Assessment is based on:
- the extent to which the research answers important questions;
- the level of critical discussion of the literature;
- the soundness of the method;
- the use of appropriate data analysis or other techniques;
- the comprehensiveness of the data analysis or other techniques;
- the level of critical discussion of the findings of the research; and
- the clarity of the writing and the organisation of the materia.
- Conduct research (supported by ethics committee approval) that uses appropriate research methods and data analysis techniques to address research questions.
- Discuss the implications of the research project for theory and practice in safety science.
- Demonstrate an in-depth knowledge of a topic in safety science.
- Knowledge
- Communication
- Cognitive, technical and creative skills
- Research
- Self-management
- Ethical and Professional Responsibility
- Leadership
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.