Overview
This unit covers topics related to occupational health and wellbeing in organisations, emphasising the principles of good work design and the integration of occupational health and safety, health promotion, wellness, work design and productivity. Topics include common occupational health hazards such as manual tasks and sedentary work behaviours, as well as psychosocial hazards such as workplace bullying, occupational violence, shift work and fatigue, which lead to occupational stress.
Details
Pre-requisites or Co-requisites
There are no requisites for this unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2024
Attendance Requirements
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University’s Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure – Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure – International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback – Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
- Evaluate the inter-relationships between the workplace, work systems, work environment and people and their impact on the health and wellbeing of individuals
- Apply knowledge of occupational health and wellbeing and psychosocial hazards to the analysis of the design of work and work systems and effectively interpret and communicate findings to organisational stakeholders
- Assess the risk of injury and/or illness from work-related psychosocial hazards and examine factors that impede workplace performance and sustainability
- Evaluate and recommend appropriate changes in work design to optimise occupational health and wellbeing, improve organisational performance and sustainability, and demonstrate respect for human dignity and diversity through an understanding of the impact of health and psychosocial factors at the workplace.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Group Discussion - 20% | ||||
| 2 - Case Study - 30% | ||||
| 3 - Written Assessment - 50% | ||||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| 1 - Knowledge | ||||
| 2 - Communication | ||||
| 3 - Cognitive, technical and creative skills | ||||
| 4 - Research | ||||
| 5 - Self-management | ||||
| 6 - Ethical and Professional Responsibility | ||||
| 7 - Leadership | ||||
| 8 - Aboriginal and Torres Strait Islander Cultures | ||||
Textbooks
There are no required textbooks.
Additional Textbook Information
There are no required textbooks for this unit. All readings will be provided in the Moodle site.
IT Resources
- CQUniversity Student Email
- Internet
- Unit Website (Moodle)
All submissions for this unit must use the referencing styles below:
For further information, see the Assessment Tasks.
k.klockner@cqu.edu.au
Module/Topic
Psychosocial Hazard Identification
Introduction to the unit, Moodle site and assessments
Psychosocial risk and workplace Health, Safety and Wellbeing
Chapter
NB: All readings will be provided via the Moodle site however some key readings are listed here.
OHS Body of Knowledge (OHS BoK) - Chapter 8.1 The Human: Basic Psychological Principles
Safe Work Australia (2015). Work Related Mental Disorders Profile
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Identification
Childhood Adverse Life Events
Neuroscience
Chapter
Centers for Disease Control and Prevention (CDC) - Adverse Childhood Experiences Study (ACE)
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Identification
Occupational Stress
Social Context of Work
Bullying, Aggression and Violence
Chapter
OHS Bok - Chapter 19 - Psychosocial Hazards and Occupational Stress
OHS BoK - Chapter 8 - The Human: Basic Principles of Social Interaction
OHS BoK - Chapter 21 - Bullying & Violence
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Identification
Physical Work Environments
Cognitive Demands
Chapter
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Identification
The Organisation of Work
Chapter
OHS BoK - Chapter 20 Fatigue
OHS Bok - Chapter 10.2.1 Organisational Culture: A Search for Meaning
OHS BoK - Chapter 10.2.2 Organisational Culture: Reviewed and Repositioned
Events and Submissions/Topic
Module/Topic
Chapter
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
OHS Law & Regulations
Codes of Practice
Chapter
WorkSafe Queensland (2022). Managing the Risk of Psychosocial Hazards at Work
Safe Work Australia (2022). Model Code of Practice: Managing Psychosocial Hazards at Work
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Assessing Psychosocial Risk
Risk Prevention
Chapter
WorkSafe Queensland (2022). Psychosocial Risk Assessment Tool
AS/NZS ISO 45003:2021 OHS Management of Psychosocial Health and Safety at Work: Guidelines for Managing Psychosocial Risks
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Work by Design
Chapter
OHS BoK Chapter 34.2 User Centred Design Approach to Control
OHS BoK Chapter 34.3 Health and Safety in Design
OHS BoK Chapter 34.4 Design of Work
Safe Work Australia (2020) Principles of Good Work Design
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Health Promotion and Wellness Programs
Chapter
Comcare Australia (2010) Effective Health and Wellness Programs
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Psychosocial Claims Management
Return to Work
Chapter
Safe Work Australia (2021). Taking Action: A Best Practice Framework for the Management of Psychological Claims in the Australian Workers' Compensation Sector
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Psychosocial Futures
Chapter
Events and Submissions/Topic
Module/Topic
Psychosocial Hazard Management
Chapter
Events and Submissions/Topic
There is no required textbook for this unit. All prescribed readings will be provided via the Moodle site.
Students are required to conduct assessments within a deidentified workplace. If you are not currently working within an organisation please contact the unit coordinator for an alternative assessment arrangement.
1 Group Discussion
This task will be completed in the Moodle site in the Assessment 1 Discussion Forum section and does not require you to upload anything for marking. Marking will be completed from your discussion in the Moodle site.
You are required to undertake the following: -
(a) In reference to the Safe Work Australia Report on Work-Related Mental Health Disorders Profile (provided via the Moodle site), you are to present a hypothesis (a supposition made on the basis of limited evidence as a starting point for further investigation) about at least three (3) psychosocial hazards which you think may be present at your workplace. You do not need to identify your workplace.
(b) Discuss how these hazards and their associated risks to workers may manifest and what impact this may have on workplace health, safety and wellbeing.
Week 5 Friday (5 Apr 2024) 11:45 pm AEST
Week 7 Friday (26 Apr 2024)
The following marking criteria will be used, and a marking matrix will be provided in the Moodle site: -
(a) In reference to the Safe Work Australia Report on Work-Related Mental Health Disorders Profile (provided via the Moodle site), you are to hypothesis and discuss at least three (3) psychosocial hazards which you think may be present at your workplace (6%),
(b) Discuss how these hazards and their associated risks to workers may manifest and what impact this may have on workplace health, safety and wellbeing (14%).
- Evaluate the inter-relationships between the workplace, work systems, work environment and people and their impact on the health and wellbeing of individuals
- Apply knowledge of occupational health and wellbeing and psychosocial hazards to the analysis of the design of work and work systems and effectively interpret and communicate findings to organisational stakeholders
2 Case Study
This assessment builds on your assessment 1 and will see you assessing psychosocial risks within a workplace. You are therefore going to use your [deidentified] workplace for the following case study: -
Step 1. Apply the Safe Work Australia Psychosocial Risk Assessment Tool within your workplace,
Step 2. Outline and discuss any psychosocial hazards and associated risks you identified through the use of the tool which may impede workplace health, safety and wellbeing.
Step 3. Review and discuss what existing policies and procedures and/or other systems your workplace currently has in place to prevent and/or manage psychosocial hazards, noting any gaps you perceive in the organisational wide prevention or management systems for psychosocial hazards.
Word limit - no more than 1500 words.
Week 8 Friday (3 May 2024) 11:45 pm AEST
Week 10 Friday (17 May 2024)
The following assessment criteria will be used, and a detailed marking matrix will be provided in the Moodle site.
(a) Application of the Safe Work Australia Psychosocial Risk Assessment Tool to your workplace (6%);
(b) Outline and discuss of any psychosocial hazards and associated risks you identified through the use of the tool which may impede workplace health, safety and wellbeing (12%)
(c) Review and discussion what existing policies and procedures and/or other systems the workplace currently has in place to prevent and/or manage psychosocial hazards, noting any gaps you perceive in the organisational wide prevention or management systems for psychosocial hazards (12%).
- Evaluate the inter-relationships between the workplace, work systems, work environment and people and their impact on the health and wellbeing of individuals
- Apply knowledge of occupational health and wellbeing and psychosocial hazards to the analysis of the design of work and work systems and effectively interpret and communicate findings to organisational stakeholders
- Assess the risk of injury and/or illness from work-related psychosocial hazards and examine factors that impede workplace performance and sustainability
- Evaluate and recommend appropriate changes in work design to optimise occupational health and wellbeing, improve organisational performance and sustainability, and demonstrate respect for human dignity and diversity through an understanding of the impact of health and psychosocial factors at the workplace.
3 Written Assessment
Your Assessment 3 task is to submit a recorded PowerPoint presentation and an associated written slide deck which covers the following criteria: -
(a) Present your evidence informed findings from the application of the Safe Work Australia Psychosocial Risk Assessment Tool that you did in assessment 2. Evaluate and outline any psychosocial hazards and associated risks you identified which may impede workplace health, safety and wellness in your workplace.
(b) Present your recommendations for the implementation of further workplace changes and any further management strategies based on your findings which are aimed at reducing the psychosocial hazards and enhancing the management of these risks in your workplace.
In your presentation you should include a discussion on the value of good work design and consider actions across the spectrum of prevention, early intervention, and the management of psychological injuries. Your argument for change needs to be persuasive and evidence informed.
Submission - A 10–15-minute recorded presentation (Zoom or other platform) and associated PowerPoint slide deck (up to 20 slides).
As a class cohort there may be an opportunity to share your final presentation with your fellow students, this option will be discussed with the class during the term.
Week 12 Friday (31 May 2024) 11:45 pm AEST
Review/Exam Week Friday (7 June 2024)
The following assessment criteria will be used, and a detailed marking matrix will be provided in the Moodle site.
(a) Present your evidence informed findings from your application of the Safe Work Australia Psychosocial Risk Assessment Tool in assessment 2, for your workplace. Evaluate and outline any psychosocial hazards and associated risks you identified which may impede workplace health, safety and wellness (15%),
(b) Then present recommendations for the implementation of further workplace changes and any further management strategies based on your findings which are aimed at reducing the psychosocial hazards and associated risks in your workplace. Your recommendations should include a discussion on the value of good work design and consider actions across the spectrum of prevention, early intervention, and the management of psychological injuries. Your argument for change needs to be persuasive and evidence informed (35%).
[10 minute-video presentation and associated PowerPoint slide deck]
- Assess the risk of injury and/or illness from work-related psychosocial hazards and examine factors that impede workplace performance and sustainability
- Evaluate and recommend appropriate changes in work design to optimise occupational health and wellbeing, improve organisational performance and sustainability, and demonstrate respect for human dignity and diversity through an understanding of the impact of health and psychosocial factors at the workplace.
As a CQUniversity student you are expected to act honestly in all aspects of your academic work.
Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.
When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.
Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.
As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.
What is a breach of academic integrity?
A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.
Why is academic integrity important?
A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.
Where can I get assistance?
For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.
What can you do to act with integrity?
