ENEM13018 - Materials and Manufacturing

General Information

Unit Synopsis

This unit offers extended information on material behaviours and manufacturing properties, principles of manufacturing processes and technologies. The unit aims to deepen the understanding of the material selection process and enables you to identify appropriate manufacturing processes for a particular product design and development. You will study a wide variety of manufacturing processes such as bulk deformation processes, material removal processes, finishing and joining processes, micro/nano scale manufacturing, and other modern manufacturing techniques and learn product design, quality management, and manufacturing in a competitive environment. You will apply information literacy skills to obtain relevant engineering information and identify appropriate standards and practices.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites
Prerequisites: (ENEG11008 Materials for Engineers or ENEG12005 Materials Science & Engineering) and MATH11218 Applied Mathematics or MATH11219 Engineering Mathematics. 

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Optional Residential School
View Unit Residential School

Unit Availabilities from Term 1 - 2024

Term 2 - 2024 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Written Assessment 20%
3. Written Assessment 20%
4. Online Test 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 2 - 2022 : The overall satisfaction for students in the last offering of this course was 71.43% (`Agree` and `Strongly Agree` responses), based on a 25.00% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit Evaluation
Feedback
Topics were practical and interesting to learn.
Recommendation
To keep the unit content and assessments widely industry-oriented for better career outcomes for graduates.
Action Taken
The proposed recommendation has been implemented vigorously. All assessment items are gradually updated and set on current practices of manufacturing.
Source: Unit Evaluation
Feedback
The industry site visit was helpful to understand several manufacturing processes.
Recommendation
Continue industry site visits for all campuses and for all students. Visits are organised and coordinated by local academics. A written report on the visit constitutes Assignment 3 which is worth 20% of marks.
Action Taken
Industry site visits were organised for all campus locations. The visits were successful with kind collaboration among industry partners.
Source: Unit Evaluation
Feedback
More videos or demonstrations of manufacturing processes would be appropriate.
Recommendation
Recommended sourcing more demo videos for wider learning.
Action Taken
Fruitful and concise demo videos concentrated on manufacturing processes have been posted in weekly sections of Moodle site.
Source: Unit Evaluation and UC
Feedback
Short lectures and tutorials.
Recommendation
Proposed to revert back to 2-hour lectures and 2-hour tutorials to provide students with more time to assimilate the subject matter.
Action Taken
Two-hour lecture classes were reinstalled and two-hour tutorial classes allowed enough time.
Source: Unit Evaluation
Feedback
Inadequate explanation of assessments
Recommendation
Revise assessments and ensure they clearly convey what is required.
Action Taken
Text in assessment items has been improved for better clarity resulting in escalating HD and D grades.
Source: Unit Evaluation
Feedback
Due time return of marked assessments
Recommendation
Recommended returning marked assessments by the due date, as well as greater feedback helping further learning.
Action Taken
Enough written feedback has been provided but still, there is a scope for individual discussion.
Source: Unit Evaluation
Feedback
Enough supplementary materials were provided to the students for their learning.
Recommendation
The same practice will be continued in next offering.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The clarification of some Quizzes were not adequate.
Recommendation
The QUIZ questions will be revised to ensure clear clarification.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
Assignment 2 requires multiple sources for data collection to solve.
Recommendation
Further guidance will be provided for student.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The industry site visits were helpful to learn manufacturing processes in practice.
Recommendation
Recommended to keep site visits ongoing.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The unit content was appropriate for a Mechanical Engineering degree.
Recommendation
The same practice will be continued in next offering.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Establish the relationships between the microstructures of materials and their mechanical and manufacturing properties
  2. Explain various bulk deformation and material removal processes as applicable to ductile and brittle materials and the machine tools that are used to carry out these operations
  3. Calculate the forces, torques and power requirements for various processing of different materials for bulk deformation
  4. Analyse the mechanics of metal cutting and the control of various process parameters to achieve optimum material removal and machining economics
  5. Apply the knowledge of engineering metrology, instrumentation and quality assurance of manufacturing of products
  6. Apply information literacy skills, obtain relevant engineering information and identify appropriate standards and practices
  7. Work, learn and communicate in an ethical, professional manner, both individually and in teams.

The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:

Intermediate
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 2I 3I 4I )
1.4 Discernment of knowledge development and research directions within the engineering discipline. (LO: 2I 3I 4I 5N )
1.6 Understanding of the scope, principles, norms, accountabilities and bounds of sustainable engineering practice in the specific discipline. (LO: 1I 2I 3I 4I 5I 6I 7I )
2.3 Application of systematic engineering synthesis and design processes. (LO: 2I 5I )
2.4 Application of systematic approaches to the conduct and management of engineering projects. (LO: 3I 4I 6I 7I )
3.1 Ethical conduct and professional accountability. (LO: 5I 6I 7I )
3.3 Creative, innovative and pro-active demeanour. (LO: 2I 3I 4I 5I 6I )
3.5 Orderly management of self, and professional conduct. (LO: 3I 4I 5I )

Advanced
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 1N 2A 3I 4I )
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 1I 2A 3A 4I 5N )
1.5 Knowledge of engineering design practice and contextual factors impacting the engineering discipline. (LO: 2A 3A 4A 5N 6I )
2.1 Application of established engineering methods to complex engineering problem solving. (LO: 2I 3A 4I 5N )
2.2 Fluent application of engineering techniques, tools and resources. (LO: 2A 3I 4I 6I )
3.2 Effective oral and written communication in professional and lay domains. (LO: 1N 2I 3I 4I 5I 6A 7A )
3.4 Professional use and management of information. (LO: 2N 3A 4A 6N 7N )

Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate and A - Advanced.
Refer to the Engineering Undergraduate Course Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information
https://moodle.cqu.edu.au/course/view.php?id=1511

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Online Test
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10