ENAE12006 - Electrical Machines and Drives

General Information

Unit Synopsis

In this unit, you will be introduced to different types of electrical machines that convert electrical energy to other forms of energy. You will cover construction and operational characteristics of DC and AC electrical machines. You will also get a basic understanding of machine protection and control schemes. You will work, learn and communicate ethically and professionally, to investigate and solve problems and present solutions. You will communicate technical aspects and operation of electrical machines and clearly document solutions to problems. You will attend a Residential School to complete the laboratory experiment component of the unit.

Details

Level Undergraduate
Unit Level 2
Credit Points 6
Student Contribution Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Pre-requisite: ENEE12015 Electrical Power Engineering OR ENAE12007 Electrical Power Systems

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 1 - 2018

Term 1 - 2018 Profile
Mixed Mode
Term 1 - 2019 Profile
Mixed Mode

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 25%
2. Written Assessment 25%
3. Practical and Written Assessment 30%
4. Online Quiz(zes) 20%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Procedures for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

Term 1 - 2018 : The overall satisfaction for students in the last offering of this course was 4.5 (on a 5 point Likert scale), based on a 76.92% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit Evaluation
Feedback
Changing the unit from project to a graded unit should remain.
Recommendation
Good practice will be continued.
Action Taken
Good practice will be continued.
Source: Unit Evaluation
Feedback
Ability to relate to work related engineering processes.
Recommendation
More examples of industry applications should be used in the unit materials.
Action Taken
More examples are included in the unit materials.
Source: Unit Evaluation
Feedback
Learning content was very interesting and the labs were set out very well. Great range of content from Powerpoints, Lectures and tutorials.
Recommendation
Good practice will be continued.
Action Taken
Good practice will be continued.
Source: Unit evaluation
Feedback
Students have appreciated the unit layout and the presentation of the content in-line with the recommended textbook.
Recommendation
This good practice will be continued.
Action Taken
Nil.
Source: Unit evaluation
Feedback
Students have appreciated having quizzes at regular intervals relating to the topics of the previous 2 weeks. They also appreciated the on time availability and responsiveness of the lecturer.
Recommendation
This good practice will be continued.
Action Taken
Nil.
Source: Unit evaluation
Feedback
Quizzes need to be open for students over an extended length of time. It must be configured to capture any correct answer/s irrespective of round-off errors etc.
Recommendation
The quizzes availability and questions will be modified accordingly.
Action Taken
Nil.
Source: Unit evaluation
Feedback
Allocate more time for the group assignment.
Recommendation
The group assignment deadlines will be set accordingly.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Describe construction and operational characteristics of DC and AC electrical machines
  2. Identify the schemes used to protect and control electric drives
  3. Analyse and formulate industrial drive problems and solve them in a professional manner
  4. Verify the operational characteristics of electrical machines through laboratory experiments
  5. Communicate effectively using terminology, symbols and diagrams associated with electrical machines through professional documentation
  6. Work, learn and communicate in an ethical, professional manner both individually and in teams, using information literacy skills to investigate problems and present solutions

Learning Outcomes are linked to Engineers Australia Stage 1 Competencies.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Written Assessment
3 - Practical and Written Assessment
4 - Online Quiz(zes)
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Written Assessment
2 - Written Assessment
3 - Practical and Written Assessment
4 - Online Quiz(zes)