ENAG11009 - Drafting for Engineers

General Information

Unit Synopsis

In this unit, students will learn the fundamentals of engineering drawing. They will produce freehand sketches and CAD drawings using orthographic projection conventions and sectioning conventions complying with Australian Standards. Students will develop skills in 3D solid modelling and rendering as well as produce detail drawings and assembly drawings. They will demonstrate an effective, professional level of communication and support peer group learning.

Details

Level Undergraduate
Unit Level 1
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites There are no pre-requisites for the unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 2 - 2019

There are no availabilities for this unit on or after Term 2 - 2019

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 0%
2. Written Assessment 30%
3. Written Assessment 30%
4. Written Assessment 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2019 : The overall satisfaction for students in the last offering of this course was 3.6 (on a 5 point Likert scale), based on a 38.1% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Staff and student feedback
Feedback
The online tutorials were beneficial to students.
Recommendation
Recommend online tutorials be continued.
Action Taken
We followed the same practice in this offering.
Source: Student feedback
Feedback
Assessment task explanation and marking criteria could be improved.
Recommendation
Task description and marking criteria will be updated and provided in week 1.
Action Taken
We followed the same practice in this offering.
Source: Student feedback
Feedback
The distribution of time allotted to the topics could be improved.
Recommendation
The schedule for the unit will be checked and updated.
Action Taken
We checked and updated the schedule for the unit.
Source: Student feedback
Feedback
Assessment feedback could not be found.
Recommendation
All assessment feedback is available via the assessment links. The Moodle system is set to send students an email when the assessments are graded. For the next term, in addition to the automatic email, a general news item will be posted on the Moodle site informing students when feedback is available.
Action Taken
We posted a general news on the Moodle when the feedback for the students is available.
Source: Student feedback
Feedback
The materials could be improved for those with no AutoCAD experience and for some other parts of the unit.
Recommendation
Recommend unit material be reviewed and improved where needed. And provide links to the large amount of Autodesk tutorials and other help to supplement the unit's textbook, videos and online tutorial sessions.
Action Taken
We improved and updated the unit contents, videos and online tutorial materials.
Source: Student feedback
Feedback
Students found the openness that everyone received the same information to queries was good.
Recommendation
The practice will continue in the future offering.
Action Taken
Nil.
Source: Have you say
Feedback
Video tutorials were very informative and supportive throughout the subject
Recommendation
We will continue a similar approach in the future offering to support student's learning.
Action Taken
Nil.
Source: Have you say
Feedback
The Moodle site is set very well.
Recommendation
The practice will continue in the future offering.
Action Taken
Nil.
Source: Have you say
Feedback
Return 'on time' assessment feedback.
Recommendation
The School is working on returning all assessments on time.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Produce freehand sketches to visually define engineering artefacts
  2. Develop and interpret drawings that use orthographic projection conventions and sectioning conventions complying with AS1100 Drawing Standards
  3. Scale, layout, draw and dimension engineering CAD drawings to provide sufficient information to manufacture artefacts
  4. Draw and interpret 2D and 3D drawings using surface modelling, 3D solid modelling and rendering with CAD software
  5. Produce component detail drawings and assembly drawings including parts lists for engineering artefacts to AS1100 standards
  6. Demonstrate an effective, professional level of communication and support collaborative peer group learning

This unit assists students to develop the Engineers Australia Stage 1 Competencies for Engineering Associates.

Knowledge and Skill Base: Learning Outcomes 1, 2, 3, 4 and 5 assist development of Elements 1.2 and 1.3.

Engineering Application Ability: Learning Outcomes 1, 2, 3, 4 and 5 assist development of Elements 2.1 and 2.2.

Professional and Personal Attributes: Learning Outcome 6 assists development of Elements 3.1, 3.2, 3.4, 3.5 and 3.6

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Written Assessment
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Written Assessment