Viewing Unit History

The information below is relevant from 07/11/2016 to 07/03/2021
Click Here to view current information

ENEC12010 - Hydraulics and Hydrology

General Information

Unit Synopsis

In this unit you will be introduced to the basic principles of hydraulics and hydrology used in civil and environmental engineering. You will apply the concepts of conservation of mass, momentum and energy. You are also introduced to flow measurements, physical modelling of hydraulic systems, and pump selection to suit given applications. The unit requires you to solve problems, prepare basic designs, and describe the construction and maintenance of pipe and open channel systems. You are introduced to monitoring and analysis of the basic components of the hydrologic cycle including rainfall, evapotranspiration, infiltration, runoff, and groundwater. In completing these tasks, you must use appropriate technical language in written communication and work individually and in teams to solve problems. Students enrolled in distance mode are required to attend a compulsory Residential School.

Details

Level Undergraduate
Unit Level 2
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Prerequisite: (MATH11218 Applied Mathematics or MATH11160 Technology Mathematics) AND (ENEG11006 Engineering Statics or PHYS11184 Engineering Physics A or ENAG11005 Mechanics)

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 3 - 2018

Term 1 - 2019 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2020 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2021 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2022 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Online Quiz(zes) 20%
2. Written Assessment 15%
3. Written Assessment 15%
4. Practical Assessment 10%
5. Examination 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

Term 1 - 2021 : The overall satisfaction for students in the last offering of this course was 4.1 (on a 5 point Likert scale), based on a 52.78% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Moodle
Feedback
More tutorial problems and solutions will help.
Recommendation
A wide range of tutorial questions, workouts and videos will be provided on a weekly basis.
Action Taken
There were more tutorial questions. Workout videos were prepared for most of the problems.
Source: Self
Feedback
There are several repetition of the contents in three water related units.
Recommendation
Repeated contents will be removed and new relevant contents will be added.
Action Taken
Repeated content was removed. More WSUD content has been added.
Source: Moodle
Feedback
Resources
Recommendation
Unit resources can be better organised. Reading resources and tutorials will be better aligned with each other.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Apply standard techniques, computational tools, and data used by engineers in conducting hydraulics analysis
  2. Solve problems involving combinations of basic hydraulic systems including pipes, pumps and open channels
  3. Explain the key components of the hydrologic cycle, and how they are monitored and analysed
  4. Determine runoff from rainfall and groundwater discharge from aquifers under specified conditions
  5. Prepare team technical reports based on thorough analysis of laboratory data and use of Civil Engineering language

All the learning outcomes are linked and comply with the Engineers Australia's Stage 1 Competency Standard.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Online Quiz(zes)
2 - Written Assessment
3 - Written Assessment
4 - Practical Assessment
5 - Examination
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Online Quiz(zes)
2 - Written Assessment
3 - Written Assessment
4 - Practical Assessment
5 - Examination