This unit introduces you to the design of concrete structures, including structural components such as beams, slabs, columns, footings and retaining walls. You will identify loads and load paths for gravity and lateral loading. Construction materials are also reviewed in the context of sustainability and environmental issues. You will also plan, prepare and carry out tests on structural concrete components, interpret the results and prepare test reports. Building design and serviceability requirements are integrated in the design process. Individual and team work focuses on development of professionalism, ethical practice, problem solving and communication. Students enrolled in distance mode are required to attend a compulsory Residential School.
Level | Undergraduate |
---|---|
Unit Level | 3 |
Credit Points | 6 |
Student Contribution Band | SCA Band 2 |
Fraction of Full-Time Student Load | 0.125 |
Pre-requisites or Co-requisites |
Prerequisites: ENEC12012 Stress Analysis AND MATH11218 Applied Mathematics Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework). |
Class Timetable | View Unit Timetable |
Residential School |
Compulsory Residential School View Unit Residential School |
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Assessment Task | Weighting |
---|---|
1. Written Assessment | 20% |
2. In-class Test(s) | 40% |
3. Practical and Written Assessment | 40% |
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
Term 2 - 2022 : The overall satisfaction for students in the last offering of this course was 100.00% (`Agree` and `Strongly Agree` responses), based on a 33.33% response rate.
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
The learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities.
You can find the mapping for this on the Engineering Undergraduate Course website.
Assessment Tasks | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Written Assessment | • | • | • | • | • | |
2 - In-class Test(s) | • | • | • | • | • | |
3 - Practical and Written Assessment | • | • | • | • | • | • |
Graduate Attributes | Learning Outcomes | |||||
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
1 - Communication | • | • | • | • | • | • |
2 - Problem Solving | • | • | • | • | • | • |
3 - Critical Thinking | • | • | • | • | • | |
4 - Information Literacy | • | • | • | • | • | • |
5 - Team Work | • | • | • | • | • | • |
6 - Information Technology Competence | • | • | • | • | • | • |
7 - Cross Cultural Competence | • | • | • | • | • | • |
8 - Ethical practice | • | • | • | • |
Assessment Tasks | Graduate Attributes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
1 - Written Assessment | • | • | • | • | • | • | • | |||
3 - Practical and Written Assessment | • | • | • | • | • | • | • | • | ||
2 - In-class Test(s) | • | • | • | • |