Viewing Unit History

The information below is relevant from 12/07/2021 to 09/07/2023
Click Here to view current information

ENEC13017 - Advanced Structural Analysis

General Information

Unit Synopsis

You will learn analysis of indeterminate structures and the implications this has for structural analysis. You will also determine reactions, internal forces, and displacements of structures and analyse truss and beams with moving loads. You will be introduced to the fundamentals of the structural analysis using the matrix method and you will use commercially available software to analyse structures.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites
Prerequisites: ENEG11006 Engineering Statics and ENEC12012 Stress Analysis

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 1 - 2023

Term 2 - 2023 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton
Term 2 - 2024 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Online Quiz(zes) 20%
2. Written Assessment 20%
3. Written Assessment 20%
4. Online Test 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 2 - 2022 : The overall satisfaction for students in the last offering of this course was 66.67% (`Agree` and `Strongly Agree` responses), based on a 45.00% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Have your say survey
Feedback
Assessments returned on time to students.
Recommendation
The practice of quick feedback turnaround will be continued.
Action Taken
The good practice continued.
Source: Have your say survey
Feedback
Some quiz questions and related content hard to understand.
Recommendation
Quiz assessments to be revisited.
Action Taken
All quiz assessments were revised.
Source: Student Survey
Feedback
The lecturer was extremely supportive and made considerable effort in helping students who required help in completing their assessments.
Recommendation
Continue this good practice.
Action Taken
Nil.
Source: Student Email
Feedback
Students appreciate the in-depth and practical discussions during the tutorial sessions.
Recommendation
Continue this good practice.
Action Taken
Nil.
Source: Unit Coordinator
Feedback
The authentic assessments helped students in understanding practical aspects but some students felt that some tasks are heavy.
Recommendation
Expand supplementary resources like exemplars and templates to give greater clarity to students when completing the assessment tasks. Improve the link between assessment tasks and learning outcomes and expand on feedback given to students.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Conduct structural idealisation of practical structures
  2. Analyse statically indeterminate structures to determine support reactions, internal forces, and nodal displacements
  3. Solve structural analysis problems using software packages
  4. Analyse indeterminate structure using the direct stiffness method
  5. Demonstrate a professional level of communication.

The Learning Outcomes for this unit are linked with the Engineers Australia Stage 1 Competency Standards for Professional Engineers in the areas of 1. Knowledge and Skill Base, 2. Engineering Application Ability and 3. Professional and Personal Attributes at the following levels:

Introductory
2.4 Application of systematic approaches to the conduct and management of engineering projects. (LO: 3N 4N )
3.4 Professional use and management of information. (LO: 4N )
3.5 Orderly management of self, and professional conduct. (LO: 3N 4N )
Intermediate
1.3 In-depth understanding of specialist bodies of knowledge within the engineering discipline. (LO: 2N 3I 4I )
1.4 Discernment of knowledge development and research directions within the engineering discipline. (LO: 3N 4I )
2.3 Application of systematic engineering synthesis and design processes. (LO: 1N 2I )
3.2 Effective oral and written communication in professional and lay domains. (LO: 5I )
Advanced
1.1 Comprehensive, theory-based understanding of the underpinning natural and physical sciences and the engineering fundamentals applicable to the engineering discipline. (LO: 1I 2I 3I 4A )
1.2 Conceptual understanding of the mathematics, numerical analysis, statistics, and computer and information sciences which underpin the engineering discipline. (LO: 2I 4A )
1.5 Knowledge of engineering design practice and contextual factors impacting the engineering discipline. (LO: 1N 2I 3I 4A )
2.1 Application of established engineering methods to complex engineering problem solving. (LO: 1N 2I 3A 4A )
2.2 Fluent application of engineering techniques, tools, and resources. (LO: 3A 4A )

Note: LO refers to the Learning Outcome number(s) which link to the competency and the levels: N – Introductory, I – Intermediate and A - Advanced.
Refer to the Engineering Undergraduate Course Moodle site for further information on the Engineers Australia's Stage 1 Competency Standard for Professional Engineers and course level mapping information
https://moodle.cqu.edu.au/course/view.php?id=1511

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Online Quiz(zes) • •
2 - Written Assessment • • • •
3 - Written Assessment • • •
4 - Online Test • •
Alignment of Graduate Attributes to Learning Outcomes
• Introductory Level
• Intermediate Level
• Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication • • • • •
2 - Problem Solving • • • •
3 - Critical Thinking • • • •
4 - Information Literacy • • • • •
6 - Information Technology Competence • •
8 - Ethical practice •
Alignment of Assessment Tasks to Graduate Attributes
• Introductory Level
• Intermediate Level
• Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Online Quiz(zes) • • • •
2 - Written Assessment • • • •
3 - Written Assessment • • • •
4 - Online Test • • • •