This unit introduces you to modelling electrical components and systems. You will apply theorems and network reduction techniques to DC and AC circuits, and apply problem-solving techniques in the analysis of AC and DC circuits. You will also cover the concepts of transient response and two-port network theorems. You will apply laboratory techniques and appropriate software tools to the analysis of electrical circuits. Use fundamental electrical engineering language in context and document the process of modelling and analysis. You will present information, communicate, work and learn in a professional manner. Online students must complete practical activities by attending a compulsory residential school.
|Student Contribution Band||2|
|Fraction of Full-Time Student Load||0.125|
|Pre-requisites or Co-requisites||
Prerequisites: (PHYS11185 Engineering Physics B OR ENEG11009 Fundamentals of Energy and Electricity) AND MATH11219 Applied Calculus
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
|Class Timetable||View Unit Timetable|
Compulsory Residential School
View Unit Residential School
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
|1. Online Quiz(zes)||15%|
|2. In-class Test(s)||25%|
|3. Practical and Written Assessment||10%|
|4. Practical and Written Assessment||10%|
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
Term 1 - 2020 : The overall satisfaction for students in the last offering of this course was 4 (on a 5 point Likert scale), based on a 63.64% response rate.
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Professional Engineers.
|Assessment Tasks||Learning Outcomes|
|1 - Online Quiz(zes)||•||•||•||•|
|2 - In-class Test(s)||•||•||•|
|3 - Practical and Written Assessment||•||•|
|4 - Practical and Written Assessment||•||•|
|5 - Examination||•||•||•|
|Graduate Attributes||Learning Outcomes|
|1 - Communication||•|
|2 - Problem Solving||•||•||•||•||•||•|
|3 - Critical Thinking||•||•||•||•||•||•|
|5 - Team Work||•||•|
|6 - Information Technology Competence||•|
|8 - Ethical practice||•|
|Assessment Tasks||Graduate Attributes|
|3 - Practical and Written Assessment||•||•||•||•|
|4 - Practical and Written Assessment||•||•||•||•|
|1 - Online Quiz(zes)||•||•|
|2 - In-class Test(s)||•||•|
|5 - Examination||•||•|