Viewing Unit History

The information below is relevant from 09/03/2015 to 10/07/2016
Click Here to view current information

ENEE13020 - Digital Electronics

General Information

Unit Synopsis

Students should be able to work in teams to model, analyse, design and verify digital electronic design projects. On satisfactory completion students should be able to discuss the application of digital electronics devices in information processing applications. In addition, they should be able to interpret functional requirements, research implementation options, analyse circuit performance, construct models for testing, verify system performance, and prepare project documents using symbols and terminologies that comply with Australian standards.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

PHYS11185 Engineering Physics B OR ENAG11002 Energy and Electricity

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Optional Residential School
View Unit Residential School

Unit Availabilities from Term 3 - 2015

Term 1 - 2017 Profile
Bundaberg
Cairns
Distance
Gladstone
Mackay
Rockhampton
Term 1 - 2018 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2019 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2020 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2021 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2022 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 25%
2. Written Assessment 35%
3. Written Assessment 25%
4. Practical Assessment 15%
5. Written Assessment 0%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

Term 1 - 2021 : The overall satisfaction for students in the last offering of this course was 4.3 (on a 5 point Likert scale), based on a 42.31% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit's survey
Feedback
Clear communications from the lecturer about the expectations for assessments helps and motivates learning.
Recommendation
This practice of clear and timely communications to expectations about assessments will be continued in the future offering of the unit.
Action Taken
Reminding of the assessments was provided to students through various channels including in class and via forum posts. Additional Zoom sessions were offered to assist students with the assessments.
Source: Unit's survey
Feedback
The laboratory was a challenging but enjoyable learning and assessment activity.
Recommendation
The laboratory is an integral part of the unit learning. Its content and delivery will be continued to be updated and improved.
Action Taken
Laboratory information and working instructions were provided to students at the start of the term. Additional supporting materials were also provided when relevant.
Source: Unit's survey
Feedback
The laboratory video session was incredibly helpful and made what seems like an impossible task for someone who has little experience with the material doable.
Recommendation
A video of the lab will be made available to support students doing the laboratory in the future offering of the unit.
Action Taken
Zoom sessions were run to support students with the laboratory. The video of the lab session was also provided in Moodle.
Source: Unit's survey
Feedback
The design project was by far the most enjoyable aspect of the unit.
Recommendation
The design project provides an important learning opportunity and assessment task for students doing this unit and therefore it will be maintained and improved.
Action Taken
The design project was updated to improve learning and provide students with an opportunity to apply knowledge and exercise learning concepts.
Source: Unit's survey
Feedback
Residential school was replaced with zoom sessions. This had a negative impact on the learning experience and caused difficulties in doing the laboratory and associated assessments.
Recommendation
In Term 1, 2020, the residential school was run due to COVID-19 restrictions. It is acknowledged that the Zoom sessions were interim solutions and could not deliver the same effectiveness and the learning outcomes as a residential school. The residential school will be resumed in future unit's offering when restrictions are lifted.
Action Taken
There was no Residential school. Instead, students had options to come to the local campus of their choice to do the lab with the on-campus students or purchase the lab kit and do the lab at home.
Source: Unit's survey
Feedback
Some aspects of the design project felt like they were outside of the scope of learning and impossible to do even after reviewing the lecture materials over and over again.
Recommendation
The design project is a major assessment and a challenging task. Students are required to integrate and apply the knowledge learned within the unit to conceive the project's solution. Although no additional knowledge outside the unit's materials would be needed, students however require to exercise their problem solving skills and sometimes carry out small research. Guidance and scaffolding toward the project's solution will be provided in the future to assist students with this task.
Action Taken
Additional textbook readings were provided to students at the end of each lecture and a small percentage of the quizzes deliberately chosen outside the lecturing materials to encourage textbook reading was explained to students.
Source: Unit's survey
Feedback
Feedback on the wrong answers in the assessments was often brief, more detailed feedback would be very helpful for learning.
Recommendation
More detailed feedback will be provided for wrong answers especially for cases when learning could be made.
Action Taken
Detailed feedback about the mistakes was provided when marking students' work.
Source: Unit's survey
Feedback
The design project, while initially seeming difficult, really helped with understanding many of the concepts in the course.
Recommendation
The project provides an authentic assessment of the materials learned in this unit. It is also an opportunity for students to learn and to exercise problem solving and creativity. The project will remain a key assessment task in this unit.
Action Taken
Nil.
Source: Unit's survey
Feedback
The laboratory really helps to link the theory with real-world practices and I really enjoyed lab work on campus.
Recommendation
The lab is an essential learning activity for this unit and it will be retained and improved.
Action Taken
Nil.
Source: Unit's survey
Feedback
Laboratory requires better supervision.
Recommendation
Improve laboratory working procedures and better briefing for lab instructors across all campuses.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Discuss digital number systems and explain how these systems are applied in the processing of digital information [1, 3]
  2. Analyse the operation of discrete and Integrated Circuit (IC) digital electronic devices and their applications in information processing [1, 3]
  3. Analyse the operation of combinational and sequential logic circuits [1, 3]
  4. Investigate the current trend in the development of Very Large Scale Integration (VLSI) devices and their applications in information processing tasks [1, 3, 4, 10]
  5. Interpret function requirements, evaluate circuit options and prepare design documentation for basic digital system applications [1, 3, 4, 10]
  6. Construct digital circuits to a given design and validate their operation [1, 3, 4, 5]
  7. Interpret and use electronic engineering terminologies and symbols that conform to Australian Standards [1, 2, 3, 5, 9]
  8. Work collaboratively and autonomously to solve problems and record and communicate clearly and professionally the approach used to solve problems [2, 4, 6, 9, 10]

Each of the above Learning Outcomes contributes to the development of the Engineers Australia's Professional Graduate Attributes (abridged) designated by [ ]:

1. science and engineering fundamentals

2. communicate effectively

3. technical competence

4. problem identification and solution

5. systems design and operation

6. individual and teamwork

7. broad perspectives

8. sustainability framework

9. professionalism and ethics

10. lifelong learning

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7 8
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Practical Assessment
5 - Written Assessment
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7 8
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Practical Assessment
5 - Written Assessment