In this unit, you will learn how to apply fundamental laws of physics related to energy and electricity using authentic engineering problems. You will be introduced to the concepts of heat, energy, work, energy conversion and laws of thermodynamics. You will apply energy principles of rotational motion, simple harmonic motion and oscillations. You will learn the concepts of voltage and current and use Kirchhoff’s laws to analyse simple direct current (DC) and alternating current (AC) electrical circuits. You will also learn the operation of electrical machines such as motors and generators and how to select a machine for a given application. Throughout this unit you will be using experimental and measurement techniques to investigate relevant physical phenomena and learn how they can be used in practice to solve engineering problems. This unit will also provide you with opportunities to develop communication skills through collaborative team work and opportunities to create professional documentation through laboratory reports. Mixed mode students are required to attend the compulsory Residential School.
|Student Contribution Band||2|
|Fraction of Full-Time Student Load||0.125|
|Pre-requisites or Co-requisites||
There are no pre-requisites for the unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
|Class Timetable||View Unit Timetable|
Compulsory Residential School
View Unit Residential School
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
|1. In-class Test(s)||25%|
|2. Practical and Written Assessment||12%|
|3. Online Quiz(zes)||10%|
|4. Practical and Written Assessment||13%|
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
No previous feedback available
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
Learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities. You can find the mapping for this on the Engineering Undergraduate Course website.
|Assessment Tasks||Learning Outcomes|
|1 - In-class Test(s)||•||•|
|2 - Practical and Written Assessment||•||•|
|3 - Online Quiz(zes)||•||•||•||•||•|
|4 - Practical and Written Assessment||•||•|
|5 - Examination||•||•||•|
|Graduate Attributes||Learning Outcomes|
|1 - Communication||•||•||•||•||•||•||•|
|2 - Problem Solving||•||•||•||•||•||•||•|
|3 - Critical Thinking||•||•||•||•||•||•||•|
|4 - Information Literacy||•||•|
|5 - Team Work||•||•|
|6 - Information Technology Competence||•||•|
|8 - Ethical practice||•|
|Assessment Tasks||Graduate Attributes|
|1 - In-class Test(s)||•||•||•||•||•|
|2 - Practical and Written Assessment||•||•||•||•||•||•|
|4 - Practical and Written Assessment||•||•||•||•||•||•|
|5 - Examination||•||•||•|
|3 - Online Quiz(zes)||•||•||•|