Viewing Unit History

The information below is relevant from 05/03/2018 to 08/03/2020
Click Here to view current information

ENEG12007 - Design and Project Management

General Information

Unit Synopsis

Generating creative design project ideas, pitching a project proposal, assembling a design team, developing a comprehensive project plan and undertaking a project are all vital skills that enable engineers to establish work opportunities. This unit takes you through the creative process of developing a prototype for an innovative design. You will consult with stakeholders, generate design ideas and as a member of a small design team, manage the development of a functional prototype and fine-tune the prototype based on stakeholder feedback. You will pitch and demonstrate your prototype to an audience of peers and industry. You will apply relevant fundamental discipline knowledge and skills as well as project management principles. Completing this unit will enable you to hone skills exhibited by productive entrepreneurial engineers.

Details

Level Undergraduate
Unit Level 2
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Prerequisites: (ENEG11007 Engineering Industry Project Investigation OR ENEG11002 Engineering Skills 2) AND (ENEG11006 Engineering Statics OR ENEG11009 Fundamentals of Energy and Electricity OR PHYS11184 Engineering Physics A OR PHYS11185 Engineering Physics B) AND MATH11218 Applied Mathematics AND ENEG11008 Materials for Engineers

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 3 - 2019

Term 1 - 2020 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton
Term 1 - 2021 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton
Term 1 - 2022 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton
Term 1 - 2023 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton
Term 1 - 2024 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Written Assessment 20%
3. Written Assessment 30%
4. Portfolio 30%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2022 : The overall satisfaction for students in the last offering of this course was 73.08% (`Agree` and `Strongly Agree` responses), based on a 28.57% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Have your say
Feedback
Students enjoy building their creativity, working through a creative design process, and producing prototypes to obtain feedback from stakeholders.
Recommendation
Continue to engage students in a creative design process centred on developing and sharing prototypes with stakeholders to broaden their design perspectives.
Action Taken
Engaging students in the creative design process is at the very core of this course. Students were continuously engaged through lectures, workshops, and personal interactions throughout the course.
Source: Have your say
Feedback
Students enjoy pitching their own projects based on authentic scenarios.
Recommendation
Continue to exercise creative confidence in students to pitch interesting, novel and challenging project ideas to create authentic and engaging design projects.
Action Taken
Students were motivated in solving problems that roam around them and in the greater society. Many novel and challenging projects came to fruition gaining valuable engineering skills.
Source: Have your say
Feedback
Students enjoyed working in collaborative workshops between teams and across campuses.
Recommendation
Continue to encourage teams and cohorts to exchange ideas in immersive peer-learning experiences during lecture and workshop sessions.
Action Taken
This aspect remains one of the strengths of the unit and was adhered to. Students engage with other students and the larger teaching team facilitating the creative design process.
Source: Have your say
Feedback
Review scheduling of activities to enhance the learning experience.
Recommendation
Consider less time for the first two assignments to maximise time for prototyping and stakeholder engagement. Also, try to avoid similar assessment dates with other units at the end of the term.
Action Taken
The first two assignments were completed by week 5 with sufficient time for stakeholder engagement and prototyping.
Source: SUTE
Feedback
The assignment templated was great and saved a lot of time.
Recommendation
The word templates should continue to be available for student use.
Action Taken
Nil.
Source: SUTE
Feedback
It wasn't clear whether a physical prototype is to be built or not.
Recommendation
We do require some evidence of prototyping. Acceptable prototypes include a reduced-scale physical prototype, computer-aided drawing, 3D printed prototypes, etc. These acceptable types should be discussed better with students.
Action Taken
Nil.
Source: SUTE
Feedback
Distant learning can be challenging during group work.
Recommendation
The cloud-based project management tool, Asana, was introduced for efficient communication among group members. More focus on how this tool can help distant students communicate and work together should be discussed in class.
Action Taken
Nil.
Source: SUTE
Feedback
More help is needed for the final assessment.
Recommendation
An additional lecture should be planned to focus on the requirements of the final assessment.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Pitch a design idea that proposes to investigate opportunities for improvement, solve a problem or produce a new product
  2. Develop a design specification by incorporating relevant Australian Standards and gathering information from potential users or clients
  3. Produce a functional prototype by applying project management skills, stakeholder feedback, relevant discipline knowledge, and the principles of sustainable development
  4. Communicate effectively, work productively, and be professionally accountable as part of a design team
  5. Reflect on the processes of creative design, project management, and prototype production.

Learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities. You can find the mapping for this on the Engineering Undergraduate Course website.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Portfolio
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Portfolio