In this unit, you will develop skills required to analyse the operation and maintenance of solid material handling equipment. The characteristics of solid materials and their impact on storage and conveying systems including requirements for the effective operation of conveyors will be explored. You will design hoppers, identify dust extraction systems, explain the applications of various feeders used in industry and apply the principles of mine product handling systems to a given mine situation. You will be required to work autonomously to produce clear, professional documentation of the approach taken in description and analysis of solid materials handling equipment.
|Student Contribution Band||SCA Band 2|
|Fraction of Full-Time Student Load||0.125|
|Pre-requisites or Co-requisites||
PHYS11184 Engineering Physics A OR ENAG11005 Mechanics
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
|Class Timetable||View Unit Timetable|
Compulsory Residential School
View Unit Residential School
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
|1. Written Assessment||25%|
|2. Written Assessment||25%|
|3. Written Assessment||25%|
|4. Practical and Written Assessment||25%|
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
Term 1 - 2020 : The overall satisfaction for students in the last offering of this course was 4.9 (on a 5 point Likert scale), based on a 29.63% response rate.
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
This unit assists students to develop the Engineers Australia Stage 1 Competencies for Professional Engineers and Engineering Technologists
Knowledge and Skills Base: Learning Outcomes 1, 2, 3, 4, 5 and 6 assist development of Elements
Engineering Application Ability: Learning Outcomes 3, and 6 assist development of Elements 2.1 and 2.2
|Assessment Tasks||Learning Outcomes|
|1 - Written Assessment||•||•||•|
|2 - Written Assessment||•||•||•||•|
|3 - Written Assessment||•||•||•|
|4 - Practical and Written Assessment||•|
|Graduate Attributes||Learning Outcomes|
|1 - Communication||•||•||•||•|
|2 - Problem Solving||•||•||•|
|3 - Critical Thinking||•||•||•||•||•||•||•|
|4 - Information Literacy||•||•||•|
|5 - Team Work||•||•|
|6 - Information Technology Competence||•||•||•|
|8 - Ethical practice||•||•|
|Assessment Tasks||Graduate Attributes|
|2 - Written Assessment||•||•||•||•||•||•|
|3 - Written Assessment||•||•||•||•||•|
|4 - Practical and Written Assessment||•||•||•||•|
|1 - Written Assessment||•||•||•||•||•|