ENEX12001 - Electrical Power and Machines

General Information

Unit Synopsis

In this unit you will model basic power system components and electrical machines using simplified linear equivalent circuits. You will explain the relationship between power and energy, and calculate power and energy in power networks and electrical machines. You will apply problem solving techniques in the analysis of balanced three-phase power circuits using per-unit methodology. You will also investigate and compare the construction and operational characteristics of direct current (DC) and alternating current (AC) electrical machines. You will explain different drive system topologies for the electrical machines. You will explain electrical machine protection and control schemes. Distance students are required to participate in the compulsory Residential School.

Details

Level Undergraduate
Unit Level 2
Credit Points 6
Student Contribution Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Prerequisite: (ENEG11009 Fundamentals of Energy and Electricity or PHYS11185 Engineering Physics B) AND MATH11218 Applied Mathematics

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 2 - 2018

Term 2 - 2018 Profile
Mackay
Mixed Mode
Term 2 - 2019 Profile
Mackay
Mixed Mode

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Online Quiz(zes) 20%
3. Practical and Written Assessment 20%
4. Examination 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Procedures for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

Term 2 - 2017 : The overall satisfaction for students in the last offering of this course was 3.4 (on a 5 point Likert scale), based on a 66.67% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Course survey
Feedback
Students have commended that course lectures, tutorials, assignment and quizzes were well done.
Recommendation
These good practices will be continued.
Action Taken
These good practices will be continued.
Source: Course survey
Feedback
Students have commended practical labs as helpful and explain much of the course
Recommendation
These good practices will be continued.
Action Taken
These good practices will be continued.
Source: Course survey
Feedback
Students pointed out the need for more time to complete labs
Recommendation
Lab session times will be increased.
Action Taken
Lab session times have been increased.
Source: Course survey
Feedback
Students have pointed out the need to increase the experimental facilities in Mackay
Recommendation
This need will be informed to the management for action.
Action Taken
The management are aware of this issue and the required action is being taken.
Source: Unit survey
Feedback
The unit-coordinator was extremely helpful, promptly answering any queries.
Recommendation
This good practice will be continued.
Action Taken
Nil.
Source: Unit survey
Feedback
Labvolt activity helps students understand the content.
Recommendation
These good practices will be continued.
Action Taken
Nil.
Source: Unit survey
Feedback
There is a discontinuity between the first half and second half of the lectures.
Recommendation
This unit will be delivered independently from other electrical units, e.g., ENEE12015 by unit coordinator/lecturer of this unit.
Action Taken
Nil.
Source: Unit survey
Feedback
The timing of the tutorials being after the lecture should be reviewed.The tutorial after the lecture didn't seem to work.
Recommendation
Tutorial sessions will be allocated in other days after lecture sessions.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Model basic power system components and machines using simplified linear equivalent circuits
  2. Explain the relationship between power and energy; calculate power and energy in power networks and electrical machines
  3. Compare and explain features of DC and AC electrical machines with regard to their construction and operational characteristics
  4. Compare and explain features of drive systems, protection and control schemes for electric machines
  5. Apply appropriate laboratory techniques and software tools to understand power systems and electrical machines
  6. Create professional documentation of the solutions, designs and analysis processes using electrical terminology, diagrams and symbols that conform to Australian or International Standards
  7. Work individually and collaboratively in a team to produce high quality outputs

The learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities. You can find the mapping for this on the Engineering Undergraduate Course website.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment
2 - Online Quiz(zes)
3 - Practical and Written Assessment
4 - Examination
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Written Assessment
2 - Online Quiz(zes)
3 - Practical and Written Assessment
4 - Examination