Viewing Unit History

The information below is relevant from 05/03/2018 to 08/03/2020
Click Here to view current information

ENEX13005 - Machine Design and Vibrations

General Information

Unit Synopsis

This unit will introduce you to the fundamental synthesis of mechanisms and machines. You will start by carrying out analysis of linkages in terms of their transmission angles, toggle positions and mobility for a certain mechanism. The kinematic analysis of any mechanism requires an acceleration analysis that depends on its position and velocity. You will be able to carry out this position, velocity, and acceleration analysis of these mechanisms (kinematic systems) using analytical equations and graphical methods. This unit will enable you to work on 3D CAD modelling and computer simulation of various mechanisms or machines. You will move on to kinetic analysis of systems thereby discussing static and dynamic balancing of rotating masses. After learning concepts of dynamics, you will study vibrations (free and forced) of single and multi degree of freedom systems and will be able to carry out analysis of such systems using force and energy methods. Students enrolled in distance mode are required to attend a compulsory Residential school and have access to a computer and make frequent use of the internet.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

MATH11219 Applied calculus AND [ENEM12007 Statics & Dynamics OR ENEM12010 Engineering Dynamics].

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 3 - 2018

Term 1 - 2019 Profile
Mackay
Mixed Mode
Term 1 - 2020 Profile
Mackay
Mixed Mode
Term 1 - 2021 Profile
Mackay
Mixed Mode
Term 1 - 2022 Profile
Mackay
Mixed Mode
Term 1 - 2023 Profile
Mackay
Mixed Mode
Term 1 - 2024 Profile
Mackay
Mixed Mode

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Written Assessment 20%
3. Practical Assessment 20%
4. Portfolio 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2023 : The overall satisfaction for students in the last offering of this course was 100.00% (`Agree` and `Strongly Agree` responses), based on a 20.00% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: In person conversation
Feedback
Students complimented the usefulness and relevance of the lab activities to the theories learned.
Recommendation
While lab activities are to further improve, its project-based assessment items should be revised to have more direct connections to the laboratory components.
Action Taken
3D CAD-based assessment items are further linked to these lab activities for a better learning experience.
Source: Self-examination
Feedback
Students seemed to struggle with understanding the given tasks for the open-ended assignment.
Recommendation
Students should be provided with detailed descriptions and requirements for the tasks of the interim report. Students should be provided with the unit coordinator's feedback for their interim report in addition to those from their peers.
Action Taken
Detailed information on each task for the final open-ended project was provided. Furthermore, the unit coordinator provided additional feedback to peer feedback for the self- and peer-assessment item.
Source: Self-examination
Feedback
MATLAB and its toolboxes were introduced and used for the first time. The difficulty level of the related tasks and coverage seemed to be excessive.
Recommendation
The tasks in the assessment items involving MATLAB and its toolboxes should be reviewed and adjusted. Students should be provided with more constructive tutorials to scaffold their understanding of MATLAB and its toolboxes in the context of machine design and vibrations.
Action Taken
After a thorough review and consultation, MATLAB was removed from the unit. Instead, students used a 3D CAD package and simulation tool within it to complete their assessment items.
Source: SUTE unit comments report
Feedback
Students complimented the delivery of live lectures in which students were able to communicate with the unit coordinator.
Recommendation
The unit coordinator should continue to deliver live lectures for better engagement and learning experiences.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Apply key concepts of kinetics and kinematics to analyse machine design and synthesis
  2. Use analytical and graphical techniques to carry out position, velocity, and acceleration analysis
  3. Apply concepts of dynamics in balancing of rotating components
  4. Analyse vibrations in single and multiple degree of freedom systems
  5. Communicate professionally using relevant technical terminology, symbols, and diagrams and effectively document calculations and solutions
  6. Work autonomously and as a team member to analyse problems and present solutions.

Learning outcomes will be linked to Engineers Australia stage 1 competency standards for Professional Engineers.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Written Assessment
3 - Practical Assessment
4 - Portfolio
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment
2 - Written Assessment
3 - Practical Assessment
4 - Portfolio