Viewing Unit History

The information below is relevant from 05/03/2018 to 08/03/2020
Click Here to view current information

ENEX20001 - Embedded System Design

General Information

Unit Synopsis

This unit will introduce you to microcontroller basics and their real world applications. You will learn about different microcontroller families and their similarities and differences from an application point of view. You will also learn about microcontroller architecture, memory maps, addressing modes, interrupts, timers, counters, and hardware interfacing of a chosen microcontroller. You will learn how to program a microcontroller in a high level language using an integrated development environment. Advanced topics of reading analog inputs, implementation of USART (Universal Synchronous Asynchronous Receiver Transmitter) connections with external world, PWM (Pulse Width Modulation), will also be covered in this unit. After learning the fundamentals of hardware interfacing you will practice them in a laboratory using a microcontroller development system based on this specific microcontroller and finally design and prototype an authentic application of embedded system in your project using the same development system. Online education students are required to attend the residential school.

Details

Level Postgraduate
Unit Level 8
Credit Points 12
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.25
Pre-requisites or Co-requisites

ENEE14006 Embedded Microcontrollers is an Anti-Requisite for this unit

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 2 - 2018

Term 2 - 2018 Profile
Melbourne
Mixed Mode
Perth
Rockhampton
Term 3 - 2018 Profile
Melbourne
Mixed Mode
Perth
Rockhampton
Term 1 - 2019 Profile
Melbourne
Perth
Rockhampton
Term 2 - 2019 Profile
Melbourne
Perth
Rockhampton
Term 3 - 2019 Profile
Melbourne
Perth
Rockhampton
Term 1 - 2020 Profile
Melbourne
Perth
Rockhampton
Term 2 - 2020 Profile
Melbourne
Perth
Rockhampton
Term 1 - 2021 Profile
Melbourne
Mixed Mode
Perth
Rockhampton
Term 2 - 2021 Profile
Melbourne
Mixed Mode
Perth
Rockhampton
Term 1 - 2022 Profile
Melbourne
Mixed Mode
Perth
Rockhampton
Term 2 - 2022 Profile
Melbourne
Mixed Mode
Rockhampton
Term 3 - 2022 Profile
Melbourne
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Practical Assessment 20%
3. Practical Assessment 20%
4. Portfolio 40%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

No previous feedback available

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Student Evaluation
Feedback
The unit was well designed and executed well.
Recommendation
The structure of the unit will remain the same.
Action Taken
The structure of the unit remained the same.
Source: Student Evaluation
Feedback
The assessments were well designed.
Recommendation
This good practice will be continued.
Action Taken
The assessment structure of the unit remained the same.
Source: Student Evaluation
Feedback
The teaching team was not only supportive but also attended to all queries raised by the students.
Recommendation
This good practice will be continued.
Action Taken
This good practice remained the same.
Source: Student Evaluation
Feedback
The engagement was high.
Recommendation
This good practice will be continued.
Action Taken
This good practice remained the same.
Source: Student Evaluation
Feedback
Due to the nature of the course, the face to face interaction is required.
Recommendation
After the pandemic, face to face interaction will be resumed.
Action Taken
Unfortunately, no face-to-face interaction was possible due to COVID-19 related travel restrictions in QLD, VIC, and PER.
Source: Student feedback during workshops and afterhours classes.
Feedback
The unit was well designed and executed well.
Recommendation
This unit design and delivery will remain unchanged.
Action Taken
Nil.
Source: Student feedback during workshops and afterhours classes.
Feedback
The assessments were well designed.
Recommendation
This unit assessment structure will remain unchanged.
Action Taken
Nil.
Source: Student feedback during workshops and afterhours classes.
Feedback
The lecturer was supportive and engaging.
Recommendation
The level of support and engagement will be continued.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Apply fundamental structured programming knowledge to perform software tasks
  2. Program a microcontroller to interface with external devices such as analog and digital sensors, actuators and computers
  3. Analyse and design microcontroller based real-time applications using a given industry standard development system and software tools
  4. Prototype an embedded microcontroller system for a real world application
  5. Communicate professionally using relevant technical terminology, symbols, and diagrams and effectively document design and prototyped solutions
  6. Work autonomously and as a team member to analyse problems and present solutions.

Learning outcomes will be linked to Engineers Australia Stage 1 Competency Standard for Professional Engineers.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Practical Assessment
3 - Practical Assessment
4 - Portfolio
Alignment of Graduate Attributes to Learning Outcomes
Advanced Level
Professional Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Knowledge
2 - Communication
3 - Cognitive, technical and creative skills
4 - Research
5 - Self-management
6 - Ethical and Professional Responsibility
7 - Leadership
Alignment of Assessment Tasks to Graduate Attributes
Advanced Level
Professional Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8
1 - Written Assessment
2 - Practical Assessment
3 - Practical Assessment
4 - Portfolio