Associate Professor Mohammad Rasul Engineering / School of Engineering and Technology

Associate Professor - Engineering

PhD(UQ), M Eng (AIT, Thailand), B Eng (BUET, Bangladesh)

Contact Details

Email: m.rasul@cqu.edu.au

Phone: (07) 4930 9676 - Ext: 59676

Office Location

Room 1.14

Building 30

About Me

I am an Associate Professor of Mechanical Engineering at the School of Engineering and Technology at Central Queensland University (Australia). My area of teaching, research and consultancy are;

  • Thermodynamics
  • Energy (Renewable, Industrial and Building Energy)
  • Fluid Mechanics and Thermofluid Engineering
  • Power Plants and Process Industries
  • Biofuel and Energy Conversion (combustion, gasification, pyrolysis, fluidization, etc.)
  • Biodiesel and diesel engine performance and emission testing
  • Energy, Water and Environmental Sustainability
Awards

CQU Excellence in Supervision Award, 2006, CQU Student Association.

Rasul, M.G. and Bhattacharya, S.C. (1992), A Performance Comparison of Three Spouted Bed Reactor Designs, Chem. Eng. J., Inst. of Engrs. (India), 72(3), 73-76. Awarded Sir Ganga Ram Memorial Prize for the best paper.

Received postgraduate scholarship and research award from the Government of France and United Nations Educational, Scientific and Cultural Organisation (UNESCO), through AIT Bangkok, Thailand.

Professional Memberships

Life Member - AIT Alumni Association.

Member - Engineers Australia.

Professional Interests

Research, teaching and consultancy in the area of

  • Thermodynamics
  • Energy (Renewable, Industrial and Building Energy)
  • Fluid Mechanics and Thermofluid Engineering
  • Power Plants and Process Industries
  • Biofuel and Energy Conversion (combustion, gasification, pyrolysis, fluidization, etc.)
  • Energy, Water and Environmental Sustainability
Poster Papers/ Published Research Summaries
Khan, S.J., Reed, R.H. and Rasul, M.G. (2011), Solar photocatalytic inactivation of Aeromonas hydrophila (ATCC 35654) using a thin-film fixed bed reactor (TFFBR), International Union of Microbiological Societies Congress (IUMS 2011), 11-16 September, Sapporo, Japan.
Published in: 2011
Khan, S.J., Reed, R. H. and Rasul, M.G. (2010), Solar photocatalytic inactivation of aquatic pathogens using a thin-film fixed bed reactor (TFFBR), Annual Scientific Meeting and Exhibition, ASM 2010, Sydney Convention and Exhibition Centre, Sydney, Australia, 4th -8th July 2010.
Published in: 2010
Khan, S.J., Rasul, M.G. and Reed, R. (2009), Photocatalysis and Sub-lethal Injury in Escherichia coli and Enterococcus faecalis, Australian Society of Microbiology: Annual Scientific Meeting and Exhibition, ASM 2009, Paper No: P13.09, Perth, Australia, 6-10 July 2009.
Published in: 2009
Theses

Rasul, M.G. (1996), Segregation Potential in Fluidized Beds, PhD Thesis, The University of Queensland, Brisbane, Australia.

 

Published in: 1996

Rasul, M.G. (1990), A Comparative Study of Different Designs of Spouted Bed Reactor, ME Thesis, Asian Institute of Technology (AIT), Bangkok, Thailand.

 

Published in: 1990

Rasul, M.G. (1987), Flow over a Rectangular Ridge in a Low Speed Wind Tunnel, BE Thesis, University of Engineering and Technology (BUET), Dhaka, Bangladesh.

Published in: 1987
Grants

Novel Nanomaterials for Polycatalytic Water Purification - Science and Application with QUT, CM Concrete and Department of Public Works by J M Bell, W N Martens, R L Frost, G D Will, R J Brown, A Goonetilleke, M G Rasul and D L Gilbert. ARC Linkage project (LP0776793). Grant received $510,000 ($375,000 from ARC, $45,000 from C M Concrete and $90,000 from Department of Public Works, Queensland Government).

Published in: 2007

Performance Improvement of Electrostatic Precipitator: Aspects of Fine particulate Emission Control with Stanwell Power Station by M G Rasul (Principal Investigator), S M E Haque, M M K Khan and A Deev. Grant received $20,000 from Stanwell Corporation.

Published in: 2006

Building Energy and Asset Management, with CIEAM and DFM of CQU by M. G. Rasul (Principal Investigator) and M.M. K. Khan. Grant received $84,200 ($39,000 from DFM, $25,200 from FRC and $20,000 from CIEAM).

Feasibility Study of Solar Desalination for CQ Region, with ISRD and DFM by M G Rasul (Principal Investigator) and M M K Khan. Grant received $75,000 ($35,500 from ISRD, $29,500 from DFM and $10,000 from FRC).

Published in: 2005
Conference Presentations

Haque, S.E.M., Rasul, M.G., Deev, A., Khan, M.M. K and Zhou, J. (2006), A CFD study of flow inside the Electrostatic Precipitator of a power plant, Student-Industry-CRC Symposium, CD-ROM, 18-23 June 2006, Gladstone (Queensland), Australia.

 

Published in: 2006
ENGINEERING
Mechanical Engineering - Energy Generation, Conversion and Storage Engineering
My research expertise and interests are; Thermodynamics Energy (Renewable, Industrial and Building Energy) Fluid Mechanics and Thermofluid Engineering Power Plants and Process Industries Biofuel and Energy Conversion (combustion, gasification, pyrolysis, fluidization, etc.) Biodiesel and diesel engine performance and emission testing Energy, Water and Environmental Sustainability
ENGINEERING
Mechanical Engineering - Energy Generation, Conversion and Storage Engineering
My research expertise and interests are; Thermodynamics Energy (Renewable, Industrial and Building Energy) Fluid Mechanics and Thermofluid Engineering Power Plants and Process Industries Biofuel and Energy Conversion (combustion, gasification, pyrolysis, fluidization, etc.) Biodiesel and diesel engine performance and emission testing Energy, Water and Environmental Sustainability
Journal article

Rahman, M. M., Rasul, M. G., Hassan, N. M. S., Azad, A. K., & Uddin, M. N. (2017). Effect of small proportion of butanol additive on the performance, emission, and combustion of Australian native first- and second-generation biodiesel in a diesel engine. Environmental Science and Pollution Research, 24(28), 22402-22413. doi:10.1007/s11356-017-9920-6

Ghadi, Y. Y., Rasul, M. G., & Khan, M. M. K. (2017). The integration of day light with advance fuzzy based controllers for institutional buildings in the region of Central Queensland, Australia. Energy Procedia, 105, 2429-2437. doi:10.1016/j.egypro.2017.03.698

Azad, A. K., Rasul, M., Khan, M. M., & Sharma, S. (2017). Macadamia biodiesel as a sustainable and alternative transport fuel in Australia. Energy Procedia, 110, 543-548. doi:10.1016/j.egypro.2017.03.182

Bhuiya, M., Rasul, M., Khan, M., & Ashwath, N. (2017). Performance and emission characteristics of binary mixture of poppy and waste cooking biodiesel. Energy Procedia, 110, 523-528. doi:10.1016/j.egypro.2017.03.179

Azad, K., Rasul, M. G., Khan, M. M. K., Sharma, S. C., Mifijur, M., & Bhuiya, M. M. K. (2016). Prospects, feedstocks and challenges of biodiesel production from beauty leaf oil and castor oil: A nonedible oil sources in Australia. Renewable and Sustainable Energy Reviews, 61, 302-318. doi:10.1016/j.rser.2016.04.013

Rahman, M., Rasul, M., Hassan, N., & Hyde, J. (2016). Prospects of biodiesel production from macadamia oil as an alternative fuel for diesel engines. Energies, 9(6), 403-419. doi:10.3390/en9060403

Ahmed, S. F., Amanullah, M. T. O., Khan, M. M. K., Rasul, M. G., & Hassan, N. M. S. (2016). Parametric study on thermal performance of horizontal earth pipe cooling system in summer. Energy Conversion and Management, 114, 324-337. doi:10.1016/j.enconman.2016.01.061

Azad, A. K., Rasul, M. G., Khan, M. M. K., Sharma, S. C., & Bhuiya, M. M. K. (2016). Recent development of biodiesel combustion strategies and modelling for compression ignition engines. Renewable and Sustainable Energy Reviews, 56, 1068-1086. doi:10.1016/j.rser.2015.12.024

Bhuiya, M. M. K., Rasul, M. G., Khan, M. M. K., Ashwath, N., Azad, A. K., & Hazrat, M. A. (2016). Prospects of 2nd generation biodiesel as a sustainable fuel - Part 2: Properties, performance and emission characteristics. Renewable and Sustainable Energy Reviews, 55, 1129-1146. doi:10.1016/j.rser.2015.09.086

Ghadi, Y. Y., Rasul, M. G., & Khan, M. M. K. (2016). Design and development of advanced fuzzy logic controllers in smart buildings for institutional buildings in subtropical Queensland. Renewable and Sustainable Energy Reviews, 54, 738-744. doi:10.1016/j.rser.2015.10.105

Azad, A. K., Rasul, M. G., Khan, M. M. K., Sharma, S. C., Bhuiya, M. M. K., & Mofijur, M. (2016). A review on socio-economic aspects of sustainable biofuels. International Journal of Global Warming, 10(1/2/3), 32-54. doi:10.1504/IJGW.2016.077903

Howard, P., Eliot, M., Rasul, M., Nouwens, F., & Lawson, J. (2016). Assessment in PBL: Do we assess the learner or the product?. International journal of engineering education., 32(1B), 348-363. Retrieved from http://www.ijee.ie/contents/c320116b.html

Link to ACQUIRE

Rashed, M., Kalam, M. A., Masjuki, H., Rahman, M., Rasul, M., & Zulkifli, N. (2016). Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester. Industrial crops and products., 79, 70-76. doi:10.1016/j.indcrop.2015.10.046

Link to ACQUIRE

Bhuiya, M. M. K., Rasul, M. G., Khan, M. M. K., Ashwath, N., & Azad, A. K. (2016). Prospects of 2nd generation biodiesel as a sustainable fuel-Part: 1 selection of feedstocks, oil extraction techniques and conversion technologies. Renewable and Sustainable Energy Reviews, 55, 1109-1128. doi:10.1016/j.rser.2015.04.163

Rahman, M., Rasul, M., Hyde, J., Azad, A., Mamat, R., & Bhuiya, M. (2016). Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction. Renewable and sustainable energy reviews., 53, 265-278. doi:10.1016/j.rser.2015.08.046

Link to ACQUIRE

Amir, M. S. I. I., Khan, M. M. K., Rasul, M. G., Sharma, R. H., & Akram, F. (2015). Hydrologic and hydrodynamic modelling of extreme flood events to assess the impact of climate change in a large basin with limited data. Journal of Flood Risk Management, 1-15. doi:10.1111/jfr3.12189

Sajjad, M., Rasul, M., & Amir, M. (2015). A case study on management of coal seam gas by-product water. International journal of chemical, molecular, nuclear, materials and metallurgical engineering., 9(2), 274-278. Retrieved from http://scholar.waset.org/1999.2/10000416

Link to ACQUIRE

Ali, M., Rasul, M., & Khan, M. (2015). A study on thermo-catalytic degradation for production of clean transport fuel and reducing plastic wastes. Procedia engineering., 105, 865-876. doi:10.1016/j.proeng.2015.05.108

Link to ACQUIRE

Azad, A., Rasul, M., Islam, R., & Shishir, I. (2015). Analysis of wind energy prospect for power generation by three weibull distribution methods. Energy procedia., 75, 722-727. doi:10.1016/j.egypro.2015.07.499

Link to ACQUIRE

Ali, M., Rasul, M., & Khan, M. (2015). Biofuel : an Australian perspective in abating the fossil fuel vulnerability. Procedia engineering., 105, 628-637. doi:10.1016/j.proeng.2015.05.041

Link to ACQUIRE

Rasul, M., Ault, C., & Sajjad, M. (2015). Bio-gas mixed fuel micro gas turbine co-generation for meeting power demand in Australian remote areas. Energy procedia., 75, 1065-1071.

Link to ACQUIRE

Rahman, M., Ali, M., Rasul, M., & Mahmudul, H. (2015). Comparative evaluation of edible and non-edible oil methyl ester performance in a vehicular engine. Energy procedia., 75, 37-43. doi:10.1016/j.egypro.2015.07.134

Link to ACQUIRE

Azad, A., Rasul, M., Giannangelo, B., & Islam, R. (2015). Comparative study of diesel engine performance and emission with soybean and waste oil biodiesel fuels. International journal of automotive and mechanical engineering., 12, 2866-2881. doi:10.15282/ijame.12.2015.6.0241

Link to ACQUIRE

Rahman, M., Masjuki, H., Kalam, M. A., Rasul, M., Atabani, A., Ali, M., & Mahmudul, H. (2015). Effect of biodiesel-diesel blending on physico-chemical properties of biodiesel produced from Moringa oleifera. Procedia engineering., 105, 665-669. doi:10.1016/j.proeng.2015.05.046

Link to ACQUIRE

Sayem, A., Khan, M., Rasul, M., Maung Than Oo, A., & Hassan, N. (2015). Effects of baffles on flow distribution in an electrostatic precipitator (ESP) of a coal based power plant. Procedia engineering., 105, 529-536. doi:10.1016/j.proeng.2015.05.086

Link to ACQUIRE

Azad, A. K., Rasul, M. G., Mofijur, M., Bhuiya, M. M. K., Mondal, S. K., & Sattar, M. K. (2015). Energy and waste management for petroleum refining effluents : a case study in Bangladesh. International Journal of Automotive and Mechanical Engineering, 11, 2170-2187. doi:10.15282/ijame.11.2015.1.0182

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2015). Flood scenarios for hydrological and hydrodynamic modelling. International journal of environmental, chemical, ecological, geological and geophysical engineering., 9(2), 44-49. Retrieved from http://scholar.waset.org/1999.6/10000358

Link to ACQUIRE

Lawson, J., Rasul, M., Howard, P., Martin, F., Hadgraft, R., & Jarman, R. (2015). Getting it right : the case for supervisors assessing process in capstone projects. International journal of engineering education., 31(6B), 1810-1818. Retrieved from http://www.ijee.ie/contents/c310615b.html

Link to ACQUIRE

Rasul, M., Lawson, J., Howard, P., Martin, F., & Hadgraft, R. (2015). Learning and teaching approaches and methodologies of capstone final year engineering projects. International journal of engineering education., 31(6B), 1727-1735.

Link to ACQUIRE

Ali, M., Rasul, M., & Khan, M. (2015). Lubricity improvement of the ultra-low sulfur diesel fuel with the biodiesel. Energy procedia., 75, 111-117. doi:10.1016/j.egypro.2015.07.619

Link to ACQUIRE

Hassan, N., Rasul, M., & Harch, C. (2015). Modelling and experimental investigation of engine performance and emissions fuelled with biodiesel produced from Australian Beauty Leaf Tree. Fuel., 150, 625-635. doi:10.1016/j.fuel.2015.02.016

Link to ACQUIRE

Bhuiya, M., Rasul, M., Khan, M., Ashwath, N., Azad, A., & Rahman, M. (2015). Optimisation of oil extraction process from Australian native beauty leaf seed (Calophyllum inophyllum). Energy procedia., 75, 56-61. doi:10.1016/j.egypro.2015.07.137

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2015). Performance assessment of earth pipe cooling system for low energy buildings in a subtropical climate. Energy conversion and management., 106, 815-825. doi:10.1016/j.enconman.2015.10.030

Link to ACQUIRE

Jahirul, M., Brown, R., Senadeera, W., Ashwath, N., Rasul, M., Rahman, M., . . . O’Hara, I. (2015). Physio-chemical assessment of beauty leaf (Calophyllum inophyllum) as second-generation biodiesel feedstock. Energy reports., 1, 204-215. doi:10.1016/j.egyr.2015.10.003

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., Sharma, S., & Ali, M. (2015). Prospect of biofuels as an alternative transport fuel in Australia. Renewable and sustainable energy reviews., 43, 331-351. doi:10.1016/j.rser.2014.11.047

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., Sharma, S., & Islam, R. (2015). Prospect of Moringa seed oil as a sustainable biodiesel fuel in Australia : a review. Procedia engineering., 105, 601-606. doi:10.1016/j.proeng.2015.05.037

Link to ACQUIRE

Sajjad, M., & Rasul, M. (2015). Prospect of underground coal gasification in Bangladesh. Procedia engineering., 105, 537-548. doi:10.1016/j.proeng.2015.05.087

Link to ACQUIRE

Kabir, M., Chowdhury, A., & Rasul, M. (2015). Pyrolysis of municipal green waste : a modelling, simulation and experimental analysis. Energies., 8(8), 7522-7541. doi:10.3390/en8087522

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2015). Recent development on the uses of alternative fuels in cement manufacturing process. Fuel., 145, 84-99. doi:10.1016/j.fuel.2014.12.029

Link to ACQUIRE

Rahman, M., Rasul, M., & Hyde, J. (2015). Recent developments on internal combustion engine performance and emissions fuelled with biodiesel-diesel-ethanol blends. Procedia engineering., 105, 658-664. doi:10.1016/j.proeng.2015.05.045

Link to ACQUIRE

Mofijur, M., Rasul, M. G., Hyde, J., & Bhuiya, M. M. K. (2015). Role of biofuels on IC engines emission reduction. Energy Procedia, 75, 886-892. doi:10.1016/j.egypro.2015.07.211

Link to ACQUIRE

Sajjad, M., & Rasul, M. (2015). Simulation and optimization of solar desalination plant using Aspen Plus simulation software. Procedia engineering., 105, 739-750. doi:10.1016/j.proeng.2015.05.065

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., Sharma, S., & Bhuiya, M. (2015). Study on Australian energy policy, socio-economic, and environment issues. Journal of renewable and sustainable energy., 7(6), 1-20. doi:10.1063/1.4938227

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2014). A numerical investigation of municipal solid waste gasification using Aspen Plus. Procedia engineering., 90, 710-717. doi:10.1016/j.proeng.2014.11.800

Link to ACQUIRE

Akram, F., Rasul, M., Khan, M., & Amir, M. (2014). A review on stormwater harvesting and reuse. World Academy of Science, Engineering and Technology., 8(3), 188-197. Retrieved from http://waset.org/publication/a-review-on-stormwater-harvesting-and-reuse/9997816

Link to ACQUIRE

Begum, S., Rasul, M., Akbar, D., & Cork, D. (2014). An experimental and numerical investigation of fluidized bed gasification of solid waste. Energies., 7(1), 43-61. doi:10.3390/en7010043

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2014). An experimental investigation of solid waste gasification using a large pilot scale waste to energy plant. Procedia engineering., 90, 718-724. doi:10.1016/j.proeng.2014.11.802

Link to ACQUIRE

Baniyounes, A., Ghadi, Y., Rasul, M., Alomari, M., & Manasreh, A. (2014). An overview of solar cooling technologies markets development and its managerial aspects. Energy procedia., 60, 1864-1869. doi:10.1016/j.egypro.2014.12.230

Link to ACQUIRE

Azad, A., Rasul, M., Alam, M., Uddin, S., & Mondal, S. (2014). Analysis of wind energy conversion system using Weibull distribution. Procedia engineering., 90, 725-732. doi:10.1016/j.proeng.2014.11.803

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2014). Aspen Plus based simulation for energy recovery from waste to utilize in cement plant preheater tower. Energy procedia., 61, 922-927. doi:10.1016/j.egypro.2014.11.996

Link to ACQUIRE

Akram, F., Rasul, M., Khan, M., & Amir, M. (2014). Comparison of different hydrograph routing techniques in XPSTORM modelling software : a case study. World Academy of Science, Engineering and Technology., 8(3), 213-223. Retrieved from http://www.waset.org/publications/9998426

Link to ACQUIRE

Ahmed, S., Khan, M., Rasul, M., Maung Than Oo, A., & Hassan, N. (2014). Comparison of earth pipe cooling performance between two different piping systems. Energy procedia., 61, 1897-1901. doi:10.1016/j.egypro.2014.12.237

Link to ACQUIRE

Uddin, M., Chattopadhyay, G., & Rasul, M. (2014). Development of effective performance measures for wayside rail curve lubrication in heavy haul lines. Proceedings of the Institution of Mechanical Engineers Part F : Journal of rail and rapid transit., 228(5), 481-495. doi:10.1177/0954409713482678

Link to ACQUIRE

Ward, J., Rasul, M., & Bhuiya, M. (2014). Energy recovery from biomass by fast pyrolysis. Procedia engineering., 90, 669-674. doi:10.1016/j.proeng.2014.11.791

Link to ACQUIRE

Chowdhury, A., & Rasul, M. (2014). Integration of simulation-based energy management techniques in undergraduate engineering curriculum to enhance students' learning. International journal of mechanical engineering education., 42(2), 85-96. doi:10.7227/IJMEE.0001

Link to ACQUIRE

Sun, Y., Cole, C., Spiryagin, M., Godber, T., Hames, S., & Rasul, M. (2014). Longitudinal heavy haul train simulations and energy analysis for typical Australian track routes. Proceedings of the Institution of Mechanical Engineers Part F : Journal of rail and rapid transit., 228(4), 355-366. doi:10.1177/0954409713476225

Link to ACQUIRE

Harch, C., Rasul, M., Hassan, N., & Bhuiya, M. (2014). Modelling of engine performance fuelled with second generation biodiesel. Procedia engineering., 90, 459-465. doi:10.1016/j.proeng.2014.11.757

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., Omri, A., Bhuiya, M., & Ali, M. (2014). Modelling of renewable energy economy in Australia. Energy procedia., 61, 1902-1906. doi:10.1016/j.egypro.2014.12.238

Link to ACQUIRE

Rasul, M., Moazzem, S., & Khan, M. (2014). Performance assessment of carbonation process integrated with coal fired power plant to reduce CO2 (carbon dioxide) emissions. Energy., 64, 330-341. doi:10.1016/j.energy.2013.09.047

Link to ACQUIRE

Ahasan, T., Ahmed, S., Rasul, M., Khan, M., & Azad, A. (2014). Performance evaluation of hybrid green roof system in a subtropical climate using Fluent. Journal of power and energy engineering., 2(4), 113-119. doi:10.4236/jpee.2014.24017

Link to ACQUIRE

Ghadi, Y., Rasul, M., & Khan, M. (2014). Potential of saving energy using advanced fuzzy logic controllers in smart buildings in subtropical climates in Australia. Energy procedia., 61, 290-293. doi:10.1016/j.egypro.2014.11.1110

Link to ACQUIRE

Ghadi, Y., Rasul, M., & Khan, M. (2014). Recent developments of advanced fuzzy logic controllers used in smart buildings in subtropical climate. Energy procedia., 61, 1021-1024. doi:10.1016/j.egypro.2014.11.1015

Link to ACQUIRE

Bhuiya, M., Rasul, M., Khan, M., Ashwath, N., Azad, A., & Ali, M. (2014). Second generation biodiesel : potential alternative to-edible oil-derived biodiesel. Energy procedia., 61, 1969-1972. doi:10.1016/j.egypro.2014.12.054

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., & Rasul, M. (2014). Selection of suitable passive cooling strategy for a subtropical climate. International journal of mechanical and materials engineering., 9(14), 1-11. doi:10.1186/s40712-014-0014-7

Link to ACQUIRE

Azad, A., Rasul, M., & Yusaf, T. (2014). Statistical diagnosis of the best Weibull methods for wind power assessment for agricultural applications. Energies., 7(5), 3056-3085. doi:10.3390/en7053056

Link to ACQUIRE

Hazrat, M. A., Rasul, M. G., Khan, M. M. K., Azad, A. K., & Bhuiya, M. M. K. (2014). Utilization of polymer wastes as transport fuel resources : a recent development. Energy Procedia, 61, 1681-1685. doi:10.1016/j.egypro.2014.12.191

Link to ACQUIRE

Alam, F., Alam, Q., & Rasul, M. (2013). A pilot study on postgraduate supervision. Procedia engineering., 56, 875-881. doi:10.1016/j.proeng.2013.03.210

Link to ACQUIRE

Baniyounes, A., Ghadi, Y., Rasul, M., & Khan, M. (2013). An overview of solar assisted air conditioning in Queensland's subtropical regions, Australia. Renewable and sustainable energy reviews., 26, 781-804. doi:10.1016/j.rser.2013.05.053

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2013). Assessment of solar assisted air conditioning in Central Queensland's subtropical climate, Australia. Renewable energy., 50, 334-341. doi:10.1016/j.renene.2012.06.042

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2013). Automatic multi-objective calibration of a rainfall runoff model for the Fitzroy Basin, Queensland, Australia. International journal of environmental science and development., 4(3), 311-315. doi:10.7763/IJESD.2013.V4.361

Link to ACQUIRE

Baniyounes, A., Liu, G., Rasul, M., & Khan, M. (2013). Comparison study of solar cooling technologies for an institutional building in subtropical Queensland, Australia. Renewable and sustainable energy reviews., 23, 421-430. doi:10.1016/j.rser.2013.02.044

Link to ACQUIRE

Sun, Y., Cole, C., Spiryagin, M., Godber, T., Hames, S., & Rasul, M. (2013). Conceptual designs of hybrid locomotives for application as heavy haul trains on typical track lines. Proceedings of the Institution of Mechanical Engineers Part F : Journal of rail and rapid transit., 227(5), 439-452. Retrieved from http://dx.doi.org/10.1177/0954409713501655

Link to ACQUIRE

Moazzem, S., Rasul, M., & Khan, M. (2013). Energy recovery opportunities from mineral carbonation process in coal fired power plant. Applied thermal engineering., 51(1), 281-291. doi:10.1016/j.applthermaleng.2012.09.021

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2013). Experimental assessment of a solar desiccant cooling system for an institutional building in subtropical Queensland, Australia. Energy and buildings., 62, 78-86. doi:10.1016/j.enbuild.2013.02.062

Link to ACQUIRE

Liu, G., Baniyounes, A., Rasul, M., Maung Than Oo, A., & Khan, M. (2013). General sustainability indicator of renewable energy system based on grey relational analysis. International journal of energy research., 37, 1928-1936. doi:10.1002/er.3016

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2013). Impact of alternative fuels on the cement manufacturing plant performance : an overview. Procedia engineering., 56, 393-400. doi:10.1016/j.proeng.2013.03.138

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2013). Numerical modelling for the extreme flood event in the Fitzroy Basin, Queensland, Australia. International journal of environmental science and development., 4(3), 346-350. doi:10.7763/IJESD.2013.V4.368

Link to ACQUIRE

Jahirul, M., Brown, J. R., Senadeera, W., Ashwath, N., Laing, C., Leski-Taylor, J., & Rasul, M. G. (2013). Optimisation of bio-oil extraction process from beauty leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source. Procedia engineering., 56, 619-624. Retrieved from http://www.sciencedirect.com/science/article/pii/s1877705813005225

Link to ACQUIRE

Begum, S., Rasul, M., Akbar, D., & Ramzan, N. (2013). Performance analysis of an integrated fixed bed gasifier model for different biomass feedstocks. Energies., 6(12), 6508-6524. doi:10.3390/en6126508

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Akram, F., & Khan, M. (2013). Tidal river sediment management : a case study in southwestern Bangladesh. World Academy of Science, Engineering and Technology, International Science Index 75, International Journal of Civil, Architectural, Structural, Urban Science and Engineering., 7(3), 183-193.

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2012). An investigation on thermo chemical conversions of solid waste for energy recovery. World Academy of Science, Engineering and Technology., 62, 624-630. Retrieved from http://www.waset.org/journals/waset/v62/v62-114.pdf

Link to ACQUIRE

Baniyounes, A., Liu, G., Rasul, M., & Khan, M. (2012). Analysis of solar desiccant cooling system for an institutional building in subtropical Queensland, Australia. Renewable and sustainable energy reviews., 16(8), 6423-6431. doi:10.1016/j.rser.2012.07.021

Link to ACQUIRE

Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012). Biofuels production through biomass pyrolysis : a technological review. Energies., 5(12), 4952-5001. doi:10.3390/en5124952

Link to ACQUIRE

Liu, G., Baniyounes, A., Rasul, M., Maung Than Oo, A., & Khan, M. (2012). Fuzzy logic based environmental indicator for sustainability assessment of renewable energy system using life cycle assessment. Procedia engineering., 49, 35-41. doi:10.1016/j.proeng.2012.10.109

Link to ACQUIRE

Anwar, M., Rasul, M., & Khan, M. (2012). Green roofs for storm water management : a review. Journal of Chongqing University (English edition)., 11(1), 5-11.

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2012). Identification of an appropriate alternative waste technology for energy recovery from waste through multi-criteria analysis. World academy of science, engineering and technology., 63, 944-949.

Link to ACQUIRE

Moazzem, S., Rasul, M. G., & Khan, M. M. K. (2012). Integration of carbonation process with coal fired power plant to reduce CO2 emissions. Procedia Engineering, 49, 74-82. doi:10.1016/j.proeng.2012.10.114

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2012). Reverse flow phenomena of a polyacrylamide solution in a channel with an obstacle at the entry : influence of obstruction geometry. Chemical engineering communications., 199(6), 689-709. doi:10.1080/00986445.2011.592454

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2012). Simulation and optimization of residential grid-connected PV system in Queensland, Australia. Advanced materials research., (347-353), 715-724. Retrieved from http://dx.doi.org/10.4028/www.scientific.net/amr.347-353.715

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2012). Sustainability indicator of renewable energy system based on fuzzy multi-criteria decision making methods. Advanced materials research., (361-363), 1263-1273. doi:10.4028/www.scientific.net/AMR.361-363.1263

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2012). Techno-economic simulation and optimization of residential grid-connected PV system for the Queensland climate. Renewable energy., 45, 146-155. Retrieved from http://dx.doi.org/10.1016/j.renene.2012.02.029

Link to ACQUIRE

Khan, S., Reed, R., & Rasul, M. (2012). Thin-film fixed-bed reactor (TFFBR) for solar photocatalytic inactivation of aquaculture pathogen Aeromonas hydrophila. BMC microbiology., 12(5), 1-11. doi:10.1186/1471-2180-12-5

Link to ACQUIRE

Khan, S., Reed, R., & Rasul, M. (2012). Thin-film fixed-bed reactor for solar photocatalytic inactivation of Aeromonas hydrophila : influence of water quality. BMC microbiology., 12(285), 1-13. doi:10.1186/1471-2180-12-285

Link to ACQUIRE

Ahmed, S., Rasul, M., Marten, W., Brown, R., & Hashib, M. (2011). Advances in heterogeneous photocatalytic degradation of phenols and dyes in wastewater : a review. Water, air, and soil pollution., 215(1-4), 3-29. doi:10.1007/s11270-010-0456-3

Link to ACQUIRE

Begum, S., Rasul, M., Brown, R., Rao, S., & Thomas, P. (2011). An experimental and computational investigation of performance of the Green Gully for reusing stormwater. Journal of water reuse and desalination., 1(2), 99-112. Retrieved from http://dx.doi.org/10.2166/wrd.2011.010

Link to ACQUIRE

McCarthy, P., Rasul, M., & Moazzem, S. (2011). Analysis and comparison of performance and emissions of an internal combustion engine fuelled with petroleum diesel and different bio-diesels. Fuel : the science and technology of fuel and energy., 90(6), 2147-2157. doi:10.1016/j.fuel.2011.02.010

Link to ACQUIRE

McCarthy, P., Rasul, M., & Moazzem, S. (2011). Comparison of the performance and emissions of different biodiesel blends against petroleum diesel. International journal of low-carbon technologies., 6(4), 255-260. doi:10.1093/ijlct/ctr012

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2011). Feasibility of thermal energy storage systems in an institutional building in subtropical climates in Australia. Applied thermal engineering., 31(14-15), 2943-2950. doi:10.1016/j.applthermaleng.2011.05.025

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Hashib, M. (2011). Influence of parameters on the heterogeneous photocatalytic degradation of pesticides and phenolic contaminants in wastewater : a short review. Journal of environmental management., 92(3), 311-330. doi:10.1016/j.jenvman.2010.08.028

Link to ACQUIRE

Templeman, A., & Rasul, M. (2011). Large eddy simulation of pressure distribution of fluid flow over ridges of circular, parabolic and rectangular shapes. WSEAS transactions on fluid mechanics., 6(2), 113-122. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2011/53-590.pdf

Link to ACQUIRE

Baniyounes, A., Liu, G., Rasul, M., & Khan, M. (2011). Review on renewable energy potential in Australian subtropical region (Central and North Queensland). Advanced materials research., (347-353), 3846-3855. doi:10.4028/www.scientific.net/AMR.347-353.3846

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2010). A modelling and experimental study of the bubble trajectory in a non-Newtonian crystal suspension. Fluid dynamics research., 42, 1-21. Retrieved from http://dx.doi.org/10.1088/0169-5983/42/6/065502

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rackemann, D. (2010). Bubble rise velocity and trajectory in xanthan gum crystal suspension. Applied rheology : Fliessverhalten steuern., 20(6), 1-13. doi:10.3933/ApplRheol-20-65102

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2010). Economic and environmental modeling of a photovoltaic-wind-grid hybrid power system in hot arid Australia. International journal of thermal & environmental engineering., 1(1), 15-22. doi:10.5383/ijtee.01.01.00

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2010). Energy conservation measures in an institutional building in sub-tropical climate in Australia. Applied energy., 87(10), 2994-3004. doi:10.1016/j.apenergy.2010.04.005

Link to ACQUIRE

Ahmed, S., Rasul, M., Marten, W., Brown, R., & Hashib, M. (2010). Heterogeneous photocatalytic degradation of phenols in wastewater : a review on current status and developments. Desalination., 261, 3-18. doi:10.1016/j.desal.2010.04.062

Link to ACQUIRE

Ahmed, S., Rasul, M., Hasib, M., & Watanabe, Y. (2010). Performance of nanofiltration membrane in a vibrating module (VSEP-NF) for arsenic removal. Desalination., 252, 127-134. doi:10.1016/j.desal.2009.10.013

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2009). An analysis of the indoor air quality and mould growth in a multi-zone building. Water, air and soil pollution. Focus., 9(5-6), 517-527. doi:10.1007/s11267-009-9244-8

Link to ACQUIRE

Haque, S., Rasul, M., Deev, A., Khan, M., & Rao, S. (2009). Flow simulation in an electrostatic precipitator of a thermal power plant. Applied thermal engineering., 29(10), 2037-2042. Retrieved from http://dx.doi.org/10.1016/j.applthermaleng.2008.10.019

Link to ACQUIRE

Haque, S., Rasul, M., Khan, M., Deev, A., & Rao, S. (2009). Influence of the inlet velocity profiles on the prediction of velocity distribution inside an electrostatic precipitator. Experimental thermal and fluid science., 33(2), 322-328. Retrieved from http://dx.doi.org/10.1016/j.expthermflusci.2008.09.010

Link to ACQUIRE

Deev, A., Rasheed, T., Welsh, M., Khan, M., & Rasul, M. (2009). Measurement of instantaneous flow velocities in a concentric reducer using Particle Image Velocimetry : study of scale deposition. Experimental thermal and fluid science., 33(6), 1003-1011. doi:10.1016/j.expthermflusci.2009.05.001

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2009). Modelling and analysis of air-cooled reciprocating chiller and demand energy savings using passive cooling. Applied thermal engineering., 29(8-9), 1825-1830. doi:10.1016/j.applthermaleng.2008.09.001

Link to ACQUIRE

Begum, S., & Rasul, M. (2009). Reuse of stormwater for watering gardens and plants using Green Gully : a new Stormwater Quality Improvement Device (SQID). Water, air and soil pollution. Focus., 9(5-6), 371-380. doi:10.1007/s11267-009-9226-x

Link to ACQUIRE

Begum, S., Rasul, M., & Brown, R. (2008). A comparative review of stormwater treatment and reuse techniques with a new approach : Green Gully. WSEAS transactions on environment and development., 4(11), 1002-1013.

Link to ACQUIRE

Alam, F., Khan, M., & Rasul, M. (2008). A comparative study of residential household energy consumption in Australia and the USA. International journal of mechanical and materials engineering., 3(2), 127-132.

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2008). A study of bubble trajectory and drag co-efficient in water and non-Newtonian fluids. WSEAS transactions on fluid mechanics., 3(3), 261-270. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2008/mgr-08.pdf.

Link to ACQUIRE

Alam, F., Subic, A., Naser, J., Rasul, M., & Khan, M. (2008). A study of spin effects on tennis ball aerodynamics. WSEAS transactions on fluid mechanics., 3(3), 271-278. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2008/mgr-09.pdf

Link to ACQUIRE

Alam, F., Subic, A., Watkins, S., Naser, J., & Rasul, M. (2008). An experimental and computational study of aerodynamic properties of rugby balls. WSEAS transactions on fluid mechanics., 3(3), 279-286. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2008/mgr-07.pdf.

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rackemann, D. (2008). Drag co-efficient in a crystal suspension. International journal of mechanical and materials engineering., 3(2), 198-205. Retrieved from http://ejum.fsktm.um.edu.my/articleinformation.aspx?articleid=690

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2008). Energy efficient cooling technologies for achieving sustainability in buildings in subtropical climate. International journal of environmental, cultural, economic and social sustainability., 4(5), 69-78.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2008). Numerical modelling of reverse flow phenomena in a channel with obstruction geometry at the entry. WSEAS transactions on fluid mechanics., 3(3), 250-260. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2008/mgr-07.pdf

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2008). Sustainability in building environment : a review and analysis of mould growth in a subtropical climate. WSEAS transactions on fluid mechanics., 3(3), 287-295. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2008/mgr-11.pdf.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2008). Thermal-comfort analysis and simulation for various low-energy cooling-technologies applied to an office building in a subtropical climate. Applied energy., 80(6), 449-462.

Link to ACQUIRE

Rasul, M., Widianto, W., & Mohanty, B. (2005). Assessment of the thermal performance and energy conservation opportunities of a cement industry in Indonesia. Applied thermal engineering., 25(17-18), 2950-2965.

Link to ACQUIRE

Hassan, N., Rasul, M., & Khan, M. (2007). Characteristics of air bubble rising in low concentration polymer solutions. WSEAS transactions on fluid mechanics., 2(3), 53-60. Retrieved from http://www.wseas.us/e-library/transactions/fluid/2007/25-477.pdf

Link to ACQUIRE

Lawrie, E., Rasul, M., & Gilroy, T. (2007). Coal land transport. Bulk solids handling., 27(8), 532-539.

Link to ACQUIRE

Khan, K., Rasul, M., & Khan, M. (2004). Energy conservation in buildings : cogeneration and cogeneration coupled with thermal-energy storage. Applied energy., 77(1), 15-34.

Link to ACQUIRE

Rasul, M., Khan, M., & Faisal, I. (2006). Environmental pollution generated from process industries in Bangladesh. International Journal of Environment and Pollution., 28(1-2), 144-161.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2004). Flow of a low concentration polyacrylamide fluid solution in a channel with a flat plate obstruction at the entry. Korea-Australia rheology journal., 16(2), 63-73.

Link to ACQUIRE

Kabir, M., Rasul, M., & Khan, M. (2006). Flow of a mixed solution in a channel with obstruction at the entry : experimental and numerical investigation and comparison with other fluids. Experimental thermal and fluid science., 30, 497-512. doi:10.1016/j.expthermflusci.2005.10.003

Link to ACQUIRE

Rasul, M., & Van Nunen, A. (2006). Grey water reclaiming and reuse for coal dust suppression in a power plant. WSEAS transactions on fluid mechanics., 1(11), 951-958.

Link to ACQUIRE

Rasul, M., & Vermeulen, P. (2006). Mine dewatering processs : improvement strategies on existing system. WSEAS transactions on fluid mechanics., 1(8), 856-863.

Link to ACQUIRE

Rasul, M. (2003). Mixing and segregation in multi-component liquid fluidized beds. Particle, particle systems characterization., 20(6), 398-407.

Link to ACQUIRE

Rasul, M., & Saotayanan, D. (2007). Modeling and simulation of thermodynamic processes of vertical shaft kiln used for producing deadburned magnesia. International journal of energy and environment., 1(1), 37-44.

Link to ACQUIRE

Rasul, M., Tanty, B., & Mohanty, B. (2007). Modelling and analysis of blast furnace performance for efficient utilization of energy. Applied thermal engineering., 27(1), 78-88.

Link to ACQUIRE

Haque, S., Rasul, M., Khan, M., Deev, A., & Rao, S. (2007). Numerical modelling for optimizing flow distribution inside an electrostatic precipitator. International journal of mathematics and computers in simulation., 1(3), 255-261. Retrieved from http://www.naun.org/journals/mcs/mcs-39.pdf

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2007). Numerical simulation of building performance under different low energy cooling technologies. International journal of energy and environment., 1(1), 28-36. Retrieved from http://www.naun.org/journals/energyenvironment/ee-06.pdf

Link to ACQUIRE

Haque, S., Rasul, M., Deev, A., Khan, M., & Zhou, J. (2006). Numerical simulation of turbulent flow inside the Electrostatic Precipitator of a power plant. WSEAS transactions on fluid mechanics., 1(1), 96-101.

Link to ACQUIRE
Conference paper

Mofijur, M., Rasul, M. G., & Hassan, N. M. S. (2017). Effect of butanol additive on the performance and emission of Australian macadamia biodiesel fuel in a diesel engine. In Proceedings of the 2017 2nd International Conference on Sustainable and Renewable Energy Engineering, ICSREE 2017 (pp. 33-37). Piscataway, NJ: IEEE. doi:10.1109/ICSREE.2017.7951506

Bhuiya, M. M. K., Rasul, M. G., Khan, M. M. K., & Ashwath, N. (2016). Comparison of oil refining and biodiesel production process between screw press and n-hexane techniques from beauty leaf feedstock. In M. Ali, M. A. Salam Akanda, & A. K. M. Monjur Morshed (Eds.), Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015): AIP Conference Proceedings Vol. 1754 (pp. 1-6). Melville, NY: AIP Publishing. doi:10.1063/1.4958457

Azad, A. K., Rasul, M. G., Bhuiya, M. M. K., & Islam, R. (2016). Effect of first and second generation biodiesel blends on engine performance and emission. In M. Ali, A. Salam Akanda, & A. Monjur Morshed (Eds.), AIP Conference Proceedings, Vol. 1754 Vol. 1754 (pp. 050031-0-050031-6). Melville, NY: AIP Publishing. doi:10.1063/1.4958422

Ghadi, Y., Rasul, M., & Khan, M. (2016). Optimization of advanced fuzzy based control system of institutional building management system (BMS) in Australian subtropical climate. In E. E. Khalil (Ed.), International Conference on Energy Research and Development, 6th: ICERD 6 (pp. 1-8). Atlanta, GA.: American Society of Heating, Refrigerating and Air-Conditioning Engineers, ASHRAE.

Azad, A., Rasul, M., Islam, R., & Ahmed, S. (2015). A study on energy and environmental management techniques used in petroleum process industries. In Proceedings of the 7th International Exergy, Energy and Environment Symposium (IEEES'7 -2015), 27-30 April 1915, Valenciennes, France. (pp. 1-7). Valenciennes, France: Universitaires de Valenciennes.

Link to ACQUIRE

Azad, A., Rasul, M., Giannangelo, B., & Ahmed, S. (2015). Diesel engine performance and emission study using soybean biodiesel blends with fossil diesel. In Proceedings of the 7th International Exergy, Energy and Environment Symposium (IEEES'7 -2015), 27-30 April 1915, Valenciennes, France. (pp. 1-10). Valenciennes, France: Universitaires de Valenciennes.

Link to ACQUIRE

Sayem, A., Khan, M., Rasul, M., & Hassan, N. (2015). Fluid flow analysis in electrostatic precipitator of a coal fired power plant considering electrode with two different shape of baflles. In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015), 26-29 November 2015, Chittagogg, Bangladesh. (pp. 1-5). Chittagong, Bangdalesh: Chittagong University of Engineering & Technology. Retrieved from http://www.cuet.ac.bd/icmere/icmere%202015%20proceedings/index.html

Link to ACQUIRE

Das, P., Khan, M., Rasul, M., & Saha, S. (2015). Fluid flow characteristics on scale deposition in a concentric reducer using CFD approach. In Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), 20-23 July, Skukuza, South Africa (pp. 878-883). South Africa: HEFAT.

Link to ACQUIRE

Rasul, M., Lawson, J., Jarman, R., Howard, P., Martin, F., Kestell, C., . . . Henderson, A. (2015). Guidelines for learning and teaching of final year engineering projects at AQF8 learning outcomes. In Proceedings of the 26th Annual Conference of the Australasian Association for Engineering Education (AAEE 2015), Blended Design and Project Based Learning : a future for Engineering Education, 6th-9th December 2015, Geelong, Victoria (pp. 410-416). Geelong, Vic.: Deakin University. Retrieved from http://aaee2015conference.sched.org/

Link to ACQUIRE

Sayem, A., & Rasul, M. (2015). Industrial engagement for ensuring engineering education standards in developing countries. In Proceedings of the 26th Annual Conference of the Australasian Association for Engineering Education (AAEE2015), Blended Design and Project Based Learning : a future for Engineering Education, 6-9 December 2015, Geelong, Victoria (pp. 1-6). Geelong, Vic.: Deakin University. Retrieved from http://aaee2015conference.sched.org/

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2015). Integrated model of horizontal earth pipe cooling system for a hot humid climate. In Proceedings of the 7th International Exergy, Energy and Environment Symposium (IEEES'7 -2015), 27-30 April 1915, Valenciennes, France. (pp. 1-9). Valenciennes, France: Universitaires de Valenciennes.

Link to ACQUIRE

Sayem, A., Khan, M., Rasul, M., Maung Than Oo, A., & Hassan, N. (2015). Modelling of baffles in electrostatic precipitator (ESP) to achieve optimum flow distribution. In Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), 20-23 July, Skukuza, South Africa (pp. 1-4). South Africa: HEFAT. Retrieved from https://edas.info/web/hefat2015/foreword.html

Link to ACQUIRE

Das, P., Khan, M., Rasul, M., & Saha, S. (2015). Study of fluid dynamics approach to scale growth mechanism and its suppression technique. In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015), 26-29 November 2015, Chittagong, Bangladesh. (pp. 1-5). Chittagong, Bangladesh: Chittagong University of Engineering & Technology. Retrieved from http://www.cuet.ac.bd/icmere/icmere%202015%20proceedings/index.html

Link to ACQUIRE

Ritchie, J., Mumtahina, U., Rasul, M., & Sayem, A. (2014). Alternative materials in hydraulic cylinder design : application of carbon fibre components. In Proceedings of the international conference on mechanical engineering and renewable energy (ICMERE2013), 1-3 May 2014, Chittagong, Bangladesh. (pp. 1-6). Chittagong, Bangladesh: Chittagong University of Engineering and Technology.

Link to ACQUIRE

Azad, A., Rasul, M., Alam, M., Uddin, S., & Mondal, S. (2014). Assessment of wind energy potential by Weibull distribution in isolated islands. In Developments in renewable energy technology (ICDRET 2014) : proceedings of the 3rd International Conference on the Developments in Renewable Energy Technology, 29-31 May 2014, Dhaka, Bangladesh. (pp. 1-6). Piscataway, NJ: IEEE. doi:10.1109/ICDRET.2014.6861732

Link to ACQUIRE

Uddin, M., Rasul, M., Chattopadhyay, G., Leinster, M., & Sharma, S. (2014). Comparison of life cycle costing and economic benefits of different wayside lubrication technology in heavy haul railway. In COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. (pp. 1-4). Sydney, NSW: Informa.

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2014). Energy and exergy analysis of a large scale biomass gasification process. In Proceedings of the 9th International Green Energy conference (IGEC-IX), 25-28 May 2014, Tianjin, China. (pp. 742-753). Tianjin, China: International Association of Green Energy.

Link to ACQUIRE

Lawson, J., Hadgraft, R., & Rasul, M. (2014). Final Year Engineering Projects : improving assessment, curriculum and supervision to meet AQF8 outcomes. In Proceedings of the 25th annual conference of the Australasian Association for Engineering Education, 8-10 December 2014, Wellington, New Zealand (pp. 1-9). Palmerston North, New Zealand: Massey University. Retrieved from http://www.aaee2014.org/page.php?17

Link to ACQUIRE

Lawson, J., Rasul, M., Howard, P., & Martin, F. (2014). Getting it right : assessment tasks and marking for capstone project courses. In Proceedings of the Capstone design conference (CapConf2014), June 2-4 2014, Columbus, OH, United States. (pp. 1-4). Columbus, USA: The Ohio State University. Retrieved from http://www.capstoneconf.org/resources/2014%20proceedings/papers/0017.pdf

Link to ACQUIRE

Howard, P., Kestell, C., Rasul, M., & Lawson, J. (2014). Guidelines for curriculum development of final year engineering projects to support achievement of AQF8 outcomes. In Proceedings of the 25th annual conference of the Australasian Association for Engineering Education, 8-10 December 2014, Wellington, New Zealand (pp. 1-8). Palmerston North, New Zealand: Massey University. Retrieved from http://www.aaee2014.org/page.php?17

Link to ACQUIRE

Rasul, M., Lawson, J., Howard, P., & Martin, F. (2014). Learning and teaching of Capstone Final Year Engineering Projects : an Australian study. In Proceedings of the Capstone design conference (CapConf2014), June 2-4 2014, Columbus, OH, United States. (pp. 1-4). Columbus, USA: The Ohio State University. Retrieved from http://www.capstoneconf.org/resources/2014%20proceedings/papers/0031.pdf

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2014). Numerical modelling of hybrid vertical earth pipe cooling system. In Proceedings of the 19th Australasian fluid mechanics conference (AFMC), 8-11 December 2014, Melbourne, Australia (pp. 1-4). Melbourne, Australia: RMIT University.

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2014). Performance analysis of vertical earth pipe cooling system for subtropical climate. In Proceedings of the 13th International Conference on Clean Energy (ICCE-2014), 8-12 June 2014, Istanbul, Turkey (pp. 691-700). Istanbul, Turkey: International Conference on Clean Energy.

Link to ACQUIRE

Dinamling, T., Mumtahina, U., Rasul, M., & Liu, G. (2014). Performance assessment of hybrid renewable energy system in subtropical climate in Australia. In Proceedings of International Conference on Mechanical Engineering (ICME 2013), 20-21 June 2014, Dhaka, Bangladesh. (pp. 1-7). Bangladesh: Bangladesh University of Engineering and Technology (BUET).

Link to ACQUIRE

Ali, M., Rasul, M., & Khan, M. (2014). Prospective use of antioxidants in 2nd generation biodiesel for diesel engines in Australia. In Proceedings of the 9th international green energy conference (IGEC-IX), 25-28 May 2014, Tianjin, China. (pp. 701-713). Tianjin, China: International Association for Green Energy. Retrieved from http://www.iage-net.org/igec9/

Link to ACQUIRE

Bhuiya, M., Rasul, M., Ashwath, N., & Khan, M. (2014). Recent development in producing biodiesel from non-edible oil feedstocks. In Proceedings of the international conference on mechanical engineering and renewable energy (ICMERE2013), 1-3 May 2014, Chittagong, Bangladesh. (pp. 1-7). Chittagong, Bangladesh: Chittagong University of Engineering and Technology. Retrieved from http://www.cuet.ac.bd/icmere/archive.php

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., & Sharma, S. (2014). Review of biodiesel production from microalgae : a novel source of green energy. In Proceedings of the 9th International Green Energy conference (IGEC-IX), 25-28 May 2014, Tianjin, China. (pp. 879-888). Tainjin, China: International Association of Green Energy.

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., & Sharma, S. (2014). Review of non-edible biofuel resources in Australia for second generation (2G) biofuel conversion. In Proceedings of the 9th International Green Energy conference (IGEC-IX), 25-28 May 2014, Tianjin, China. (pp. 867-878). Tainjin, China: International Association of Green Energy.

Link to ACQUIRE

Sajjad, M., & Rasul, M. (2014). Review on the existing and developing underground coal gasification techniques in abandoned coal seam gas blocks : Australia and global context. In Proceedings of 1st international e-Conference on energies, 14-31 March, 2014, MDPI, Basel, Switzerland. (pp. 1-16). Basel, Switzerland: MDPI. doi:10.3390/ece-1-b002

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., & Sharma, S. (2014). Socio-economic aspects of 2nd generation biofuels in Australia : a review. In Proceedings of the 13th International Conference on Clean Energy (ICCE-2014), 8-12 June 2014, Istanbul, Turkey (pp. 210-221). Istanbul, Turkey: International Conference on Clean Energy.

Link to ACQUIRE

Akram, F., Rasul, M., Khan, M., & Amir, M. (2014). Stormwater pond design for Rockhampton (Queensland) golf course premises. In Proceedings of the 19th Australasian fluid mechanics conference (AFMC), 8-11 December 2014, Melbourne, Australia (pp. 1-4). Melbourne, Australia: RMIT University.

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2014). Watershed delineation and cross-section extraction from DEM for flood modelling. In Proceedings of the 19th Australasian fluid mechanics conference (AFMC), 8-11 December 2014, Melbourne, Australia (pp. 1-4). Melbourne, Australia: RMIT University.

Link to ACQUIRE

Ullah, I., Rasul, M., & Khan, M. (2013). An overview of solar thermal desalination technologies. In Latest trends in renewable energy and environmental informatics : Proceedings of the 7th International Conference on Renewable Energy Sources (RES '13) ; Proceedings of the 1st International Conference on Environmental Informatics (ENINF '13), Kuala Lumpur, Malaysia, April 2-4, 2013 (pp. 335-340). Greece?: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2013/malaysia/resen/resen-53.pdf

Link to ACQUIRE

Howard, P., Rasul, M., & Nouwens, F. (2013). Assessing final year engineering projects. In PBL Across Cultures : Proceedings from the 4th International Research Symposium on PBL 2013. (pp. 95-99). Aalborg, Denmark: Aalborg University Press.

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2013). Cement calciner model development for optimizing the usage of alternative fuels. In Proceedings of 12th International Conference on Sustainable Energy Technologies (SET 2013), 26-29 August 2013, Hong Kong, China. (pp. 1784-1794). Hong Kong, China: Hong Kong Polytechnic University.

Link to ACQUIRE

Hassan, N., Rasul, M., Lawson, J., Howard, P., & Martin, F. (2013). Development and assessment of the final year engineering projects : a review. In Proceedings of the 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013), Work Integrated Learning : Applying Theory to Practice in Engineering Education, Crowne Plaza Hotel, Gold Coast, Queensland, December 8-11, 2013 (pp. 1-10). Brisbane, Queensland: Griffith University. Retrieved from http://www.engineersaustralia.org.au/

Link to ACQUIRE

Nouwens, F., Rasul, M., Lawson, J., Howard, P., Martin, F., & Jarman, R. (2013). Educational purposes of final year engineering projects and their assessment. In Proceedings of the 24th Annual Conference of the Australasian Association for Engineering Education (AAEE 2013), Work Integrated Learning : Applying Theory to Practice in Engineering Education, Crowne Plaza Hotel, Gold Coast, Queensland, December 8-11, 2013 (pp. 1-9). Brisbane, Queensland: Griffith University. Retrieved from http://www.engineersaustralia.org.au/

Link to ACQUIRE

Leyden, T., Rasul, M., & Kabir, M. (2013). Gasification of coffee bean husks : analysis and model development for energy generation using ASPEN Plus simulation software. In Proceedings of 12th International Conference on Sustainable Energy Technologies (SET 2013), 26-29 August 2013, Hong Kong, China. (pp. 1919-1930). Hong Kong, China: Hong Kong Polytechnic University.

Link to ACQUIRE

Sun, Y., Cole, C., Spiryagin, M., Rasul, M., Godber, T., & Hames, S. (2013). Hybrid locomotive applications for an Australian heavy haul train on a typical track route. In Proceedings : 10th International Heavy Haul Association Conference, Capacity building through heavy haul operation, 4-6 February, New Delhi, India. vol. 1 (pp. 751-757). New Delhi, India: Indian Railways.

Link to ACQUIRE

Kabir, M., Rasul, M., Ashwath, N., & Chowdhury, A. (2013). Modelling and experimental studies of municipal green waste pyrolysis. In Proceedings of 12th International Conference on Sustainable Energy Technologies (SET 2013), 26-29 August 2013, Hong Kong, China. (pp. 1-10). Hong Kong: Hong Kong Polytechnic University.

Link to ACQUIRE

Kabir, M., Rasul, M., Ashwath, N., & Chowdhury, A. (2013). Optimisation of biofuel production from municipal green waste (MGW) pyrolysis using ASPEN plus simulation model. In Proceedings of 12th International Conference on Sustainable Energy Technologies (SET 2013), 26-29 August 2013, Hong Kong, China. (pp. 1-11). Hong Kong: Hong Kong Polytechnic University.

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2013). Solar air conditioning for an institutional building in subtropical climate. In Latest trends in renewable energy and environmental informatics : Proceedings of the 7th International Conference on Renewable Energy Sources (RES '13) ; Proceedings of the 1st International Conference on Environmental Informatics (ENINF '13), Kuala Lumpur, Malaysia, April 2-4, 2013 (pp. 323-334). Greece?: WSEAS Press.

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2013). Thermal performance analysis of earth pipe cooling system for subtropical climate. In 12th International Conference on Sustainable Energy Technologies (SET2013) : proceedings, 26-29 August, 2013, Hong Kong Polytechnic University, Hong Kong, China. (pp. 1-9). Hong Kong, China: Hong Kong Polytechnic University.

Link to ACQUIRE

Anwar, M., Rasul, M., & Khan, M. (2013). Thermal performance analysis of rooftop greenery system in subtropical climate of Australia. In Latest trends in renewable energy and environmental informatics : Proceedings of the 7th International Conference on Renewable Energy Sources (RES '13) ; Proceedings of the 1st International Conference on Environmental Informatics (ENINF '13), Kuala Lumpur, Malaysia, April 2-4, 2013 (pp. 341-346). Greece?: WSEAS Press.

Link to ACQUIRE

Rasul, M., Patel, A., Cole, C., Sun, Y., Spiryagin, M., Godber, T., & Hames, S. (2013). Train motive power technologies : a review on existing and emerging (hybrid) technologies. In 10th World Congress on Railway Research (WCRR2013), Sydney Convention and Exhibition Centre, Australia, 25th-28th November 2013. (pp. 1-11). Brisbane, Qld: CRC for Rail Innovation.

Link to ACQUIRE

Akram, F., Rasul, M., Khan, M., & Amir, M. (2012). A comparative view of groundwater flow simulation using two modelling software - MODFLOW and MIKE SHE. In Proceedings of the Eighteenth Australasian Fluid Mechanics Conference. (pp. 1-4). Launceston, Tasmania, Australia: Australasian Fluid Mechanics Society.

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2012). A review of downscaling and 1-D/2-D hydraulic model for flood studies. In Central Region Engineering Conference 2012 proceedings,10-11 August, 2012, Rockhampton, Queensland. (pp. 80-84). Rockhampton, Queensland: Engineers Australia. Retrieved from https://www.engineersaustralia.org.au/

Link to ACQUIRE

Kabir, M., Rasul, M., Ashwath, N., & Chowdhury, A. (2012). A review on green wastes pyrolysis for energy recovery. In Recent researches in environmental and geological sciences : Proceedings of the 7th WSEAS International Conference on Energy & Environment (EE '12) ; Proceedings of the 7th WSEAS International Conference on Continuum Mechanics (CM '12) ; Proceedings of the 6th WSEAS International Conference on Geology and Seismology (GES '12) [and] Proceedings of the 7th WSEAS International Conference on Water Resources, Hydraulics & Hydrology (WHH '12) (pp. 101-107). Greece: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2012/kos/wegecm/wegecm-13.pdf

Link to ACQUIRE

Kaddatz, K., Rasul, M., & Rahman, A. (2012). Alternative fuels for use in cement kilns : process impact modelling. In Procedia engineering. (pp. 413-420). Netherlands: Elsevier.

Link to ACQUIRE

Sherry, W., Rasul, M., Hassan, N., & Khan, M. (2012). Analysis and comparison of engine performance and exhaust emissions of internal combustion engine for three different fuel efficiency devices. In HEFAT 2012 : Proceedings of the Heat Transfer, Fluid Mechanics and Thermodynamics 2012 international conference (pp. 669-673). Malta: HEFAT.

Link to ACQUIRE

Akram, F., Rasul, M., Khan, M., & Amir, M. (2012). Automatic delineation of drainage networks and catchments using DEM data and GIS capabilities : a case study. In Proceedings of the 18th Australasian Fluid Mechanics Conference. (pp. 344-347). Launceston 7250, Tasmania, Australia: Australasian Fluid Mechanics Society.

Link to ACQUIRE

Baniyounes, A., Liu, G., Rasul, M., & Khan, M. (2012). Economical and environmental performance of solar desiccant cooling system in subtropical Australia. In Proceedings of the IASTED International Conference Power and Energy Systems (EuroPES 2012), June 25-27, 2012, Napoli, Italy (pp. 91-96). Calgary: IASTED. doi:10.2316/P.2012.775-101

Link to ACQUIRE

Sun, Y., Cole, C., Spiryagin, M., Rasul, M., Godber, T., & Hames, S. (2012). Energy storage system analysis for heavy haul hybrid locomotives. In CORE2012 : Global Perspectives ; Conference on Railway Engineering, 10-12 September 2012, Brisbane, Australia (pp. 581-590). Barton, A.C.T.: RTSA,.

Link to ACQUIRE

Sun, Y., Cole, C., Spiryagin, M., Rasul, M., Godber, T., & Hames, S. (2012). Energy usage analysis for Australian heavy haul trains on typical track routes. In CORE2012 : Global Perspectives ; Conference on Railway Engineering, 10-12 September 2012, Brisbane, Australia (pp. 559-567). Barton, A.C.T.: RTSA,.

Link to ACQUIRE

Kabir, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012). Environmental impacts of green wastes to energy conversion through pyrolysis process : an overview. In Procedia engineering. (pp. 1-8). Netherlands: Elsevier.

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2012). Feasibility study of solar desiccant cooling for an institutional building in subtropical Queensland, Australia. In Proceedings of the IASTED International Conference Power and Energy Systems (EuroPES 2012), June 25-27, 2012, Napoli, Italy (pp. 154-161). Calgary: IASTED,. doi:10.2316/P.2012.775-102

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2012). Identifying opportunities for synergetic integration of CO2 capture with a coal power plant. In Proceeding of the Fourth International Conference on Applied Energy. (pp. 2361-2367). Suzhou, China: Applied Energy.

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2012). Impact of alternative fuels on the cement manufacturing plant performance : an overview. In Procedia engineering. (pp. 393-400). Netherlands: Elsevier. Retrieved from http://www.sciencedirect.com/science/article/pii/s187770581300492x

Link to ACQUIRE

Liu, G., Baniyounes, A., Rasul, M., Maung Than Oo, A., & Khan, M. (2012). Impacts of climate change on solar PV power system: a case study in subtropical Rockhampton, Australia. In HEFAT 2012 : Proceedings of the Heat Transfer, Fluid Mechanics and Thermodynamics 2012 international conference (pp. 1-5). Malta: HEFAT2012.

Link to ACQUIRE

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2012). Industrial waste as alternative fuel in cement industry : its impact on environment. In Recent researches in environmental and geological sciences : Proceedings of the 7th WSEAS International Conference on Energy & Environment (EE '12) ; Proceedings of the 7th WSEAS International Conference on Continuum Mechanics (CM '12) ; Proceedings of the 6th WSEAS International Conference on Geology and Seismology (GES '12) [and] Proceedings of the 7th WSEAS International Conference on Water Resources, Hydraulics & Hydrology (WHH '12) (pp. 108-114). Greece?: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2012/kos/wegecm/wegecm-14.pdf

Link to ACQUIRE

Uddin, M., Chattopadhyay, G., Rasul, M., & Leinster, M. (2012). Modelling of grease transport mechanism in wayside rail lubrication and impact of related parameters. In CORE2012 : Global Perspectives ; Conference on Railway Engineering, 10-12 September 2012, Brisbane, Australia M. Dhanasekar, T. Constable, & D. Schonfeld (eds.). (pp. 475-484). Canberra, Australia: The Railway Technical Society of Australasia (RTSA).

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2012). Multi criteria analysis to identify a suitable CO2 capture technology for a coal power plant. In Proceedings of the Fourth International Conference on Applied Energy. (pp. 2353-2360). Suzhou, China: Applied Energy.

Link to ACQUIRE

Wu, Y., Rasul, M., Khan, M., Powell, J., & Micenko, P. (2012). Rail temperature prediction model. In CORE2012 : Global Perspectives ; Conference on Railway Engineering, 10-12 September 2012, Brisbane, Australia (pp. 81-90). Barton, A.C.T.: RTSA.

Link to ACQUIRE

Amir, M., Khan, M., Rasul, M., Sharma, R., & Akram, F. (2012). Rainfall, temperature and evaporation trends in the Fitzroy Basin, Queensland, Australia. In Hydrology and Water Resources Symposium (HWRS2012), Docksie, Cockle Bay, Sydney, N.S.W., Australia, 19-22 November 2012. (pp. 1484-1491). Canberra, Australia: Engineers Australia.

Link to ACQUIRE

Rasul, M., & Jahirul, M. (2012). Recent developments in biomass pyrolysis for bio-fuel production : its potential for commercial applications. In Recent researches in environmental and geological sciences : Proceedings of the 7th WSEAS International Conference on Energy & Environment (EE '12) ; Proceedings of the 7th WSEAS International Conference on Continuum Mechanics (CM '12) ; Proceedings of the 6th WSEAS International Conference on Geology and Seismology (GES '12) [and] Proceedings of the 7th WSEAS International Conference on Water Resources, Hydraulics & Hydrology (WHH '12) (pp. 256-265). Kos Island: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2012/kos/wegecm/wegecm-38.pdf

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2012). Review of CO2 capture technologies for power plant application. In I. Ngamroo (Ed.), Proceedings of the fifth IASTED Asian Conference Power and Energy Systems (AsiaPES 2012), April 2-4, 2012, Phuket, Thailand (pp. 1-7). Calgary, Canada: ACTA Press. Retrieved from http://dx.doi.org/10.2316/p.2012.768-081

Link to ACQUIRE

Akbar, D., & Rasul, M. (2012). Review of the nexus between urban and regional planning and engineering education. In Profession of engineering education : advancing teaching, research and careers, 2012 annual conference for the Australasian Association for Engineering Education : Melbourne, Victoria, Australia (pp. 159-166). Melbourne, Australia: Swinburne University of Technology. Retrieved from http://www.aaee.com.au/

Link to ACQUIRE

Baniyounes, A., Liu, G., Rasul, M., & Khan, M. (2012). Solar desiccant cooling and indoor air quality for institutional building in subtropical climate (review). In Proceedings of the fifth IASTED Asian Conference Power and Energy Systems (AsiaPES 2012), April 2-4, 2012, Phuket, Thailand (pp. 375-381). Calgary, Canada: ACTA Press ;. doi:10.2316/P.2012.768-091

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2012). Synergetic integration of chemical absorption CO2 capture with a coal power plant. In Central Region Engineering Conference 2012 proceedings,10-11 August, 2012, Rockhampton, Queensland. (pp. 33-40). Rockhampton, Queensland: Engineers Australia. Retrieved from https://www.engineersaustralia.org.au/

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2012). Temperature monitoring and CFD analysis of data centre. In Procedia engineering. (pp. 551-559). Netherlands: Elsevier.

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Maung Than Oo, A. (2012). Thermal performance modelling of data centre : a case study. In HEFAT 2012 : Proceedings of the Heat Transfer, Fluid Mechanics and Thermodynamics 2012 international conference (pp. 1683-1689). Malta: HEFAT. Retrieved from http://edas.info/web/hefat2012/authors.html#k

Link to ACQUIRE

Begum, S., Rasul, M., & Akbar, D. (2011). A review on alternative waste treatment technology for energy recovery in Australia. In Proceedings of the WasteSafe 2011: 2nd International Conference on Solid Waste Management in Developing Countries. (pp. 1-10). Khulna, Bangladesh: WasteSafe, Department of Civil Engineering.

Link to ACQUIRE

Moazzem, S., Rasul, M., & Khan, M. (2011). An evaluation of CO2 emission reduction through carbonation technology. In Proceedings : Asia-Pacific Power and Energy Engineering Conference (APPEEC), March 25-28 2011, Wuhan, China (pp. 1-5). Piscataway, NJ: IEEE. doi:10.1109/APPEEC.2011.5749122

Link to ACQUIRE

Rasul, M., & Hassan, N. (2011). An innovative delivery and assessment of thermofluid engineering : a PBL course in undergraduate engineering program. In Proceedings of the 22nd Annual Conference for the Australasian Association for Engineering Education (AAEE 2011) : Developing Engineers for Social Justice : Community Involvement, Ethics & Sustainability (pp. 325-330). Perth, Western Australia: Causal Productions Pty Ltd. Retrieved from http://www.aaee.com.au/conferences/2011/papers/aaee2011/pdf/author/ae110199.pdf

Link to ACQUIRE

Hassan, N., Cole, C., Khan, M., Rasul, M., & Maung Than Oo, A. (2011). Application of project based learning in advanced dynamics. In International Engineering and Technology Education Conference (IETEC 2011) : Enhancing 21st century skills for global engineers and technology professionals, 16-19 January 2011, Kuala Lumpur (pp. 1-13). Kuala Lumpur, Malaysia: IETEC. Retrieved from http://www.ietec-conference.com/

Link to ACQUIRE

Moazzem, S., Rasul, M., & Khan, M. (2011). Assessment of energy recovery from carbonation process using mass and energy balance. In 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, 11-13 July 2011. (pp. 494-501). Pointe Aux Piments, Mauritius: HEFAT.

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Hassan, N. (2011). CFD simulation of turbulence promoters in a water treatment reactor. In NAFEMS World Congress: A World of Simulation, Boston, USA. (pp. 1-11). Boston, USA: Nafems World Congress.

Link to ACQUIRE

Akbar, D., & Rasul, M. (2011). Community engagement in engineering education. In Proceedings of the 2011 AAEE Conference:Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability. (pp. 1-6). Freemantle, WA: Australasian Association for Engineering Education. Retrieved from http://www.aaee.com.au/conferences/2011/papers/aaee2011/pdf/author/ae110171.pdf

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Hassan, N. (2011). Computational fluid dynamics modelling of flow in a photocatalytic reactor for wastewater treatment. In NAFEMS World Congress: A World of Simulation, Boston, USA. (pp. 1-12). Boston, USA: Nafems World Congress.

Link to ACQUIRE

Uddin, M., Chattopadhyay, G., Rasul, M., Sroba, P., & Howie, A. (2011). Development of economic model for analyzing lubrication effectiveness in heavy haul lines. In International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM), 30 May-1 June 2011, Stavanger, Norway (pp. 1430-1441). United Kingdom: COMADEM International.

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2011). Feasibility study of stand-alone PV-wind-biomass hybrid energy system in Australia. In Proceedings : Asia-Pacific Power and Energy Engineering Conference (APPEEC), March 25-28 2011, Wuhan, China (pp. 1-6). Piscataway, NJ: IEEE. doi:10.1109/APPEEC.2011.5749125

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Duran, J. (2011). Flow field investigation in a water treatment reactor using computational fluid dynamics. In ASME-JSME-KSME Joint Fluids Engineering Conference. (pp. 1479-1485). Hamamatsu, Shizuoka, Japan: ASME-JSME-KSME Joint Fluids Engineering Conference. doi:10.1115/AJK2011-03061

Link to ACQUIRE

Uddin, M., Chattopadhyay, G., Rasul, M., Sroba, P., & Howie, A. (2011). Friction management best practices for Australian heavy haul lines. In International Heavy Haul Association Conference, June 19 - 22, 2011, Westin Hotel, Calgary, Canada : conference proceedings. (pp. 1-4). Calgary, Canada: International Heavy Haul Association.

Link to ACQUIRE

Anwar, M., Rasul, M. G., & Khan, M. M. K. (2011). Green Roofs for Storm Water Management: A Review. In World Renewable Energy Asia Regional Congress (WREN-Asia) and the 5th International Conference on Sustainable Development in Building and Environment (SuDBE2011) (pp. 1-6). China: WREC-Asia.

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Duran, J. (2011). Numerical simulation of flow in a photocatalytic reactor containing baffles. In ASME-JSME-KSME Joint Fluids Engineering Conference 2011. Vol. 1 (pp. 1487-1493). Hamamatsu, Shizuoka, Japan: ASME-JSME-KSME Joint Fluids Engineering Conference 2011. doi:10.1115/AJK2011-03062

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2011). Post combustion carbon capture and storage in existing coal power plant : importance and recent development. In 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, 11-13 July 2011. (pp. 837-844). Pointe Aux Piments, Mauritius: HEFAT.

Link to ACQUIRE

Ahmed, S., Rasul, M., Marten, W., & Brown, R. (2011). Recent developments in photocatalytic degradation of pesticides and phenols in storm and wastewater effluent. In Proceedings of the Environmental Research Event 2010, CQUniversity, Rockhampton, Qld. Transitions to a Sustainable Future, CQUniversity, Rockhampton, Qld., 27-30 June 2010. (pp. 1-5). Rockhampton, Qld.: CQUniversity Australia.

Link to ACQUIRE

Anwar, M., Rasul, M., & Khan, M. (2011). Rooftop greenery systems in subtropical climates for environmental sustainability : a review. In World Renewable Energy Asia Regional Congress and Exhibition (WREC-Asia) and 5th International Conference on Sustainable Development and Building and Environment (SuDBE2011), Chongqing, China, 28-31 October 2011. (pp. 1-6). Chongqing, China: Chongqing University.

Link to ACQUIRE

Hare, N., Rasul, M., & Moazzem, S. (2010). A review on boiler deposition/foulage prevention and removal techniques for power plant. In Recent advances in energy and environment : Proceedings of the 5th IASME / WSEAS International conference on energy & enviroment (EE '10), University of Cambridge, U.K., February 23-25, 2010 (pp. 217-222). Cambridge, UK: WSEAS press. Retrieved from http://www.wseas.us/e-library/conferences/2010/cambridge/ee/ee-32.pdf

Link to ACQUIRE

Wu, Y., Munro, P., Rasul, M., & Khan, M. (2010). A review on recent developments in rail temperature prediction for use in buckling studies. In Rail - rejuvenation & renaissance, proceedings of Conference on Railway Engineering (CORE 2010), Wellington, New Zealand, 12-14 September 2010. (pp. 31-42). Wellington, New Zealand: RTSA.

Link to ACQUIRE

Ahmed, S., Rasul, M., Marten, W., & Brown, R. (2010). A review on the role of operating parameters in heterogeneous photo catalytic water purification processes for storm and wastewater reuse. In Recent advances in energy and environment : Proceedings of the 5th IASME / WSEAS International conference on energy & enviroment (EE '10), University of Cambridge, U.K., February 23-25, 2010 (pp. 178-183). Cambridge, UK: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2010/cambridge/ee/ee-26.pdf

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2010). AHP and fuzzy assessment based sustainability indicator for hybrid renewable energy system. In Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2010) : Power quality of the 21st century, Christchurch, New Zealand, 5-8 December 2010 (pp. 1-6). Christchurch: University of Canterbury.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2010). Analysis of building systems performance through integrated computation fluid dynamics technique. In Proceedings of the 13th Asian Congress of Fluid Mechanics (13ACFM), 17-21 December 2010, Dhaka Bangladesh (pp. 625-628). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Chattopadhyay, G., Desai, A., Sroba, P., Rasul, M., Howie, A., & Uddin, M. (2010). Best practice in rail curve lubrication and remote performance monitoring in heavy haul lines. In AusRAIL 2010 : Innovation and customer relations, Perth, 23-24 November 2010. (pp. 1-7). Australia: AusRAIL.

Link to ACQUIRE

McCarthy, P., Rasul, M., & Moazzem, S. (2010). Bio diesel against petroleum diesel : assessment of internal combustion engine performance and emissions. In SET 2010 : 9th International Conference on Sustainable Energy Technologies, Shanghai, China, 24-27 August, 2010. (pp. 1-8). Shanghai, China: Shanghai, China : Wang Ruzhu, 2010.

Link to ACQUIRE

Moazzem, S., Rasul, M., & Khan, M. (2010). Carbon di oxide (CO2) emissions : an overview of the possible technologies for reducing CO2 emissions in power plants. In SET 2010 : 9th International Conference on Sustainable Energy Technologies, Shanghai, China, 24-27 August, 2010. (pp. 1-8). Shanghai, China: Wang Ruzhu.

Link to ACQUIRE

Ahmed, S., Rasul, M., Brown, R., & Hassan, N. (2010). Computational fluid dynamics analysis of a flat plate photocatalytic reactor for storm and wastewater reuse. In Proceedings of the 13th Asian Congress of Fluid Mechanics (13ACFM), 17-21 December 2010, Dhaka Bangladesh (pp. 529-532). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2010). Energy resource quality assessment of PV/wind hybrid renewable energy system. In Proceedings of CHEMECA 2010 : Engineering at the Edge, Adelaide, Australia, 26–29 September, 2010 (pp. 1-13). Adelaide, SA: University of Adelaide. Retrieved from http://www.chemeca2010.com/abstract/246.asp

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2010). Environmental and economic analysis for grid-connected hybrid photovoltaic-wind power system in a hot arid environment. In Proceedings of the International Engineering Conference on Hot Arid Regions (IECHAR 2010), Challenges, Technologies, and Opportunities, Al-Ahsa, Kingdom of Saudi Arabia, March 1-2, 2010 (pp. 59-64). Kingdom of Saudi Arabia: King Faisal University.

Link to ACQUIRE

Haque, S., Rasul, M., & Khan, M. (2010). Fine particulate emission control by optimizing process parameters of an electrostatic precipitator. In Recent advances in energy and environment : Proceedings of the 5th IASME / WSEAS International conference on energy & enviroment (EE '10), University of Cambridge, U.K., February 23-25, 2010 (pp. 223-228). Cambridge, UK: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2010/cambridge/ee/ee-33.pdf

Link to ACQUIRE

Zammit, J., & Rasul, M. (2010). Hose water system modelling and analysis of an alumina refinery. In Proceedings of the 13th Asian Congress of Fluid Mechanics (13ACFM), 17-21 December 2010, Dhaka Bangladesh (pp. 708-713). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2010). Implementing renewable energy for HVAC systems in entertainment and exhibition centres. In Proceedings of the 1st International Conference on Advances in Renewable Energy Technologies (ICARET 2010), 6-7 July 2010, Cyberjaya, Malaysia (pp. 89-95). Malaysia: Centre for Renewable Energy, Universiti Tenaga Nasional.

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2010). Modeling of bubble flow distribution in crystal suspended non-Newtonian fluids. In Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010), 19 – 21 July 2010, Antalya, Turkey. (pp. 1671-1676). Antalya, Turkey: HEFAT.

Link to ACQUIRE

Chowdhury, A., Rasul, M., Khan, M., & Alam, F. (2010). Performance analysis of a novel building material to achieve superior thermal comfort and energy efficiency in arid climate. In Proceedings of the International Engineering Conference on Hot Arid Regions (IECHAR 2010), Challenges, Technologies, and Opportunities, Al-Ahsa, Kingdom of Saudi Arabia, March 1-2, 2010 (pp. 121-126). Kingdom of Saudi Arabia: King Faisal University.

Link to ACQUIRE

Wu, Y., Rasul, M., & Khan, M. (2010). Radiation prediction and comparision for engineering applications. In Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010), 19 – 21 July 2010, Antalya, Turkey. (pp. 1-6). Antalya, Turkey: HEFAT.

Link to ACQUIRE

Sturgeon, C., Rasul, M., & Chowdhury, A. (2010). Reduction of carbon dioxide emissions by mineral carbonation. In M. A. Rosen, R. Perryman, S. Dodds, F. Muzi, W. Yuji, Z. Polkowska, . . . M. Sobik (Eds.), Recent advances in energy and environment : Proceedings of the 5th IASME / WSEAS International conference on energy & enviroment (EE '10), University of Cambridge, U.K., February 23-25, 2010 (pp. 350-355). Cambridge, UK: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2010/cambridge/ee/ee-58.pdf

Link to ACQUIRE

Baniyounes, A., Rasul, M., & Khan, M. (2010). Review on solar assisted air conditioning for hospitals isolation units. In Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010), 19 – 21 July 2010, Antalya, Turkey. (pp. 1291-1296). Antalya, Turkey: HEFAT.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2010). Thermodynamic processes and characterisation of dead burned magnesia : a review. In Recent advances in energy and environment : Proceedings of the 5th IASME / WSEAS International conference on energy & enviroment (EE '10), University of Cambridge, U.K., February 23-25, 2010 (pp. 344-349). Cambridge, UK: WSEAS Press. Retrieved from http://www.wseas.us/e-library/conferences/2010/cambridge/ee/ee-57.pdf

Link to ACQUIRE

Uddin, M., Chattopadhyay, G., Sroba, P., Rasul, M., & Howie, A. (2010). Wayside lubricator placement model for heavy haul lines in Australia. In Rail - rejuvenation & renaissance, proceedings of Conference on Railway Engineering (CORE 2010), Wellington, New Zealand, 12-14 September 2010. (pp. 354-364). Wellington, New Zealand: RTSA.

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rao, S. (2009). A sustainable production in sugar industries : study of an improved vacuum pan performance through numerical simulations. In Proceedings : Central Region Engineering Conference 2009 (CREC 2009), Regional Sustainability: Local Solutions to Global Issues, Rockhampton, Queensland, 14-15 August 2009. (pp. 1-9). Rockhampton,Qld: Engineers Australia and CQUniversity.

Link to ACQUIRE

Driscoll, P., & Rasul, M. (2009). Design and development of a stand-alone power supply for a small industrial control system. In Alternative Energy Applications : option or necessity? Proceedings of the Engineering Congress on Alternative Energy Applications, Kuwait, 2-6 November 2009. (pp. 1-6). Kuwait City: World Federation of Engineering Organisations.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2009). Eco-roof system for sustainable communities. In Proceedings : Central Region Engineering Conference 2009 (CREC 2009), Regional Sustainability: Local Solutions to Global Issues, Rockhampton, Queensland, 14-15 August 2009. (pp. 1-5). Rockhampton, Qld: Engineers Australia and CQ University.

Link to ACQUIRE

Rasul, M., Nouwens, F., Martin, F., Greensill, C., Singh, D., Kestell, C., & Hadgraft, R. (2009). Good practice guidelines for managing, supervising and assessing final year engineering projects. In Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education (AAEE 2009) : Engineering the Curriculum, 6th-9th December 2009, Adelaide, Australia, University of Adelaide, Adelaide, SA. (pp. 205-210). Adelaide, South Australia: School of Mechanical Engineering, University of Adelaide. Retrieved from http://aaee.com.au/conferences/aaee2009/pdf/author/ae090108.pdf

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2009). Integration of project based investigation into an undergraduate fluid mechanics course for research and teaching excellence. In Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education: Engineering the Curriculum, 6th-9th December 2009, Adelaide, Australia, The University of Adelaide, Adelaide, SA. (pp. 1-6). Adelaide: School of Mechanical Engineering, University of Adelaide. Retrieved from http://aaee.com.au/conferences/aaee2009/pdf/author/ae090179.pdf

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rao, S. (2009). Modelling of air bubble rising in water and polymeric solution. In Proceedings : 10th Asian International Conference on Fluid Machinery, Kuala Lumpur, Malaysia, 21st-23rd October, 2009. (pp. 1-12). Kuala Lumpur, Malaysia: Asian Fluid Machinery Committee.

Link to ACQUIRE

Alam, F., Rasul, M., Saman, W., Theos, T., Khan, M., & Akbarzadeh, A. (2009). Residential house energy rating in Australia. In Proceedings : Central Region Engineering Conference 2009 (CREC 2009), Regional Sustainability: Local Solutions to Global Issues, Rockhampton, Queensland, 14-15 August 2009. (pp. 1-5). Rockhampton, Qld.: Engineers Australia and CQUniversity.

Link to ACQUIRE

Ahmed, S., Rasul, M., Marten, W., & Brown, R. (2009). Sustainable reuse of storm/waste-water resources : a review on solar photocatalytic purification processes. In Proceedings : Central Region Engineering Conference 2009 (CREC 2009), Regional Sustainability: Local Solutions to Global Issues, Rockhampton, Queensland, 14-15 August 2009. (pp. 1-8). Rockhampton, Qld.: Engineers Australia and CQUniversity.

Link to ACQUIRE

Chowdhury, A., & Rasul, M. (2009). Sustainable solution to the green waste management by thermo-chemical converison processes. In Alternative Energy Applications : option or necessity? Proceedings of the Engineering Congress on Alternative Energy Applications, Kuwait, 2-6 November 2009. (pp. 1-6). Kuwait: World Federation of Engineering Organisations.

Link to ACQUIRE

Brushe, M., & Rasul, M. (2008). A method of noise reduction for the cooling fans used in locomotives. In Chemeca 2008 : Proceedings, Towards a sustainable Australasia, 28 September - 1 October, 2008, Newcastle, Australia. (pp. 45-54). Australia: Engineers Australia. Retrieved from http://search.informit.com.au/documentsummary;dn=588870144667184;res=ieleng

Link to ACQUIRE

Begum, S., Rasul, M., & Brown, R. (2008). A new approach to stormwater treatment and reuse : Green Gully and its performance measurement. In Proceedings of the 2nd WSEAS (pp. 137-143). New York, USA: WESAS Press.

Link to ACQUIRE

Haque, S., Rasul, M., Khan, M., Deev, A., & Rao, S. (2008). A numerical approach to improve the flow model of an electrostatic precipitator. In Chemeca 2008 : Proceedings, Towards a sustainable Australasia, 28 September - 1 October, 2008, Newcastle, Australia. (pp. 73-84). Barton, ACT: Engineers Australia 2008. Retrieved from http://search.informit.com.au/fulltext;dn=588926043580958;res=ieleng

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2008). Air bubble trajectories in polymeric solution and crystal suspension. In Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh. (pp. 970-975). Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rackemann, D. (2008). An experimental investigation of bubble rise characteristics in a crystal suspended non-Newtonian fluid. In Proceedings of the 15th International Congress on Rheology : the Society of Rheology 80th annual meeting, Monterey, California, 3-8 August 2008 (pp. 1315-1320). Brisbane, Qld. Australia: American Institute of Physics.

Link to ACQUIRE

Hooley, C., Rasul, M., & Deev, A. (2008). Analysis of flow patterns inside the stirred tank used in alumina refinery. In Chemeca 2008 : Proceedings, Towards a sustainable Australasia, 28 September - 1 October, 2008, Newcastle, Australia. (pp. 55-62). Australia: Engineers Australia. Retrieved from http://search.informit.com.au/documentsummary;dn=588888777638442;res=ieleng

Link to ACQUIRE

Breffit, S., Rasul, M., & Chowdhury, A. (2008). Comparison of the performance and emissions of a petrol engine using a range of unleaded fuels. In Prooceedings of the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh. (pp. 512-519). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Schrader, J., & Rasul, M. (2008). Design and simulation of a small scale solar powered desalination system. In Proceedings of the 3rd IASME (pp. 124-129). Greece: WSEAS Press.

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2008). Energy conservation measures in an institutional building by dynamic simulation using DesignBuilder. In Proceedings of the 3rd IASME (pp. 192-197). Greece: WSEAS Press.

Link to ACQUIRE

Williams, C., & Rasul, M. (2008). Feasibility of hybrid cooling system in a thermal power plant. In Proceedings of the 3rd IASME (pp. 124-129). Greece: WSEAS Press.

Link to ACQUIRE

Averina, A., Rasul, M., & Begum, S. (2008). Management of coal seam gas (CSG) by-product water : a case study on Spring Gully Mine Site in Queensland, Australia. In Proceedings of the 2nd International conference on waste management : waste management, water pollution, air pollution, indoor climate (WWAI'08). (pp. 169-174). New York, USA: WSEAS Press.

Link to ACQUIRE

Haque, S., Rasul, M., & Khan, M. (2008). Modelling and simulation of particle trajectory inside an electrostatic precipitator. In Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh. (pp. 648-657). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Hansen, M., & Rasul, M. (2008). Performance assessment and improvement of an existing air conditioning system of a supermarket : a case study on Bi-Lo supermarket. In Proceedings of the 3rd IASME (pp. 55-60). Greece.: WSEAS Press.

Link to ACQUIRE

Begum, S., Rasul, M., & Brown, R. (2008). Stormwater treatment and reuse techniques : a review. In Proceedings of the 2nd WSEAS (pp. 144-149). New York, USA: WSEAS Press.

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2008). Techno-economic study of thermal energy storage systems in tropical climate university building. In Chemeca 2008 : Proceedings, Towards a sustainable Australasia, 28 September - 1 October, 2008, Newcastle, Australia. (pp. 63-72). Australia: Engineers Australia. Retrieved from http://search.informit.com.au/documentsummary;dn=588907410609700;res=ieleng

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2007). A comparative study of bubble rise phenomena in water and low concentration polymer solutions. In Proceedings of the Fifth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), Sun City, South Africa, 1-4 July 2007. (pp. 1-6). Sun City, South Africa: HEFAT07.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2005). A comparative study of the flow phenomena of water and mixed solution in a channel with obstruction : influence of shapes. In 7th World Congress on Chemical Engineering, Glasgow, Scotland, 10-14 July 2005. (pp. 1-9). Glasgow: Institute of Chemical Engineers.

Link to ACQUIRE

Haque, S., Rasul, M., Khan, M., Deev, A., & Rao, S. (2007). A numerical model of an electrostatic precipitator. In Proceedings of the 16th Australiasian Fluid Mechanics Conference (AFMC), Gold Coast, Queensland, Australia, 3-7 December, 2007 (pp. 1050-1054). Brisbane, Qld.: School of Engineering, The University of Queensland.

Link to ACQUIRE

Rahman, M., Rasul, M., Khan, M., & Harrower, K. (2007). An analysis of airborne fungal spore concentration in buildings in a subtropical climate. In Proceedings of the 5th international symposium on heating, ventilating and air conditioning (ISHVAC 2007), Beijing, China, 7th-8th September, 2007. (pp. 363-369). Beijing, China: Tsinghua University.

Link to ACQUIRE

Hassan, N., Khan, M., Rasul, M., & Rackemann, D. (2007). An experimental study of bubble rise characteristics in non-Newtonian (power-law) fluids. In Proceedings of the 16th Australiasian Fluid Mechanics Conference (AFMC), Gold Coast, Queensland, Australia, 3-7 December, 2007 (pp. 1315-1320). Brisbane, Qld: School of Engineering, University of Queensland.

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2006). An Experimental study of the bubble rise velocity and trejectory in water under pressure and vacuum. In Proceedings of the 3rd BSME ASME International Conference on Thermal Engineering, 20th-22nd December, 2006, Dhaka, Bangladesh. (pp. 1-6). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Rasul, M., & Tappenden, D. (2006). Assessment of the thermal performance of a coal-fired power plant boiler unit. In Proceedings of the 3rd BSME ASME International Conference on Thermal Engineering, 20th-22nd December, 2006, Dhaka, Bangladesh. (pp. 1-7). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Rasul, M., Tanty, B., Khan, M., & Mohanty, B. (2005). Blast furnace performance analysis for efficient utilization of energy. In 7th World Congress of Chemical Engineering. (pp. 1-10). Glasgow Scotland: Institute of Chemical Engineers.

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2007). Bubble rise velocity and drag co-efficient at high reynolds number in power-law fluids. In Proceedings of the 5th IASME (pp. 123-128). Athens, Greece: WSEAS Press.

Link to ACQUIRE

Khan, K., Rasul, M., & Khan, M. (2002). Building energy management : co-generation coupling with thermal energy storage. In Proceedings of the ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana. (pp. 1-7). New Orleans, Lousina, USA: American Society of Mechanical Engineers. Retrieved from http://dx.doi.org/10.1115/imece2002-33107

Link to ACQUIRE

Rahman, M., Rasul, M., & Khan, M. (2006). Buildings energy simulation using energy express : a case study on sub-tropical Central Queensland University (CQU) buildings. In Proceedings of the 3rd BSME-ASME International Conference on Thermal Engineering, 20th-22nd December, 2006, Dhaka, Bangladesh. (pp. 1-6). Dhaka, Bangladesh: Bangladesh Society of Mechanical Enineers (BSME).

Link to ACQUIRE

Rasul, M., & Brown, J. (2007). Coal seam methane power generation. In Proceedings of the Ninth IASTED International Conference on Power and Energy Systems (PES 2007), January 3-5 2007, Clearwater, Florida, USA. (pp. 131-137). USA: ACTA Press.

Link to ACQUIRE

Rasul, M., Khan, M., & Das, D. (2003). Comparison of pressure distribution over ridges in a wind tunnel. In Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 23 - 26 June 2003, Victoria Falls, Zambia. (pp. 1-5). Victoria Falls, Zambia: University of Zambia and Engineering Institute of Zambia.

Link to ACQUIRE

Rasul, M., Wilkings, M., & Dobson, J. (2004). Cooling tower performance analysis to save energy and cost. In Proceedings of the 32nd Australasian Chemical Engineering conference. (pp. 1-6). Sydney, Australia: ICMS.

Link to ACQUIRE

Rasul, M., Khan, M., Faisal, I., Shammin, R., & Junaid, J. (2003). Environmental pollution in process industries : a case study on Bangladesh. In National Environment Conference 2003 : Conference Proceedings. (pp. 430-435). Brisbane, Australia: Environmental Engineering Society of Australia and IEAust.

Link to ACQUIRE

Rasul, M., & Van Nunen, A. (2007). Feasibility of grey water reuse for coal dust suppression in a coal-fired power station. In FLUIDS '07 : proceedings, the 4th WSEAS International Conference on Fluid Mechanics, Gold Coast, Queensland, Australia, January 17-19 2007.. USA: WSEAS Press.

Link to ACQUIRE

Buckett, C., Rasul, M., & Khan, M. (2007). Feasibility study of a bi-directional centrifugal pump for DBT class 45 CST gearbox used in underground coal mining operation. In Proceedings of the 16th Australiasian Fluid Mechanics Conference (AFMC), Gold Coast, Queensland, Australia, 3-7 December, 2007 (pp. 1369-1373). Brisbane, Qld.: University of Queensland, School of Engineering.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2002). Flow characteristics of low concentration non-Newtonian fluid through a channel with an obstruction at the entry. In Proceedings of the ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana. (pp. 1-7). NY: ASME International.

Link to ACQUIRE

Haque, S., Rasul, M., Rao, S., Deev, A., & Khan, M. (2007). Flow distribution inside an electrostatic precipitator : effects of uniform and variable porosity of perforated plate. In Proceedings of the Heat Transfer, Thermal Engineering and Environment (HTE'07) (pp. 62-67). Athens, Greece: World Scientific and Engineering Academy and Society Press.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2002). Flow of water in a channel with various obstruction geometries at the entry. In 2nd World Engineering Congress. (pp. 164-168). Selangor, Darul Ehsan, Malaysia: University Putra Malaysia Press.

Link to ACQUIRE

Kabir, M., Khan, M., & Rasul, M. (2002). Flow visualisation investigation of water in a channel with flat plate obstruction geometry at the entry. In 2nd World Engineering Congress. (pp. 133-138). Selangor, Darul Ehsan, Malaysia: University Putra Malaysia Press.

Link to ACQUIRE

Allen, M., & Rasul, M. (2005). Hot acid leaching of Zircon. In 7th World Congress of Chemical Engineering (WCCE7), Glasgow, 10-15 July 2005. (pp. 1-10). Glasgow: Institute of Chemical Engineers.

Link to ACQUIRE

Warren, M., & Rasul, M. (2007). Hybrid-electric vehicles : design and application of ECSC - an automotive energy savings device. In Proceedings of the 5th IASME (pp. 56-61). Athens, Greece: WSEAS Press.

Link to ACQUIRE

Rasul, M., & Vermeulen, P. (2007). Improvement strategies for mine dewatering process. In FLUIDS '07 : proceedings, the 4th WSEAS International Conference on Fluid Mechanics, Gold Coast, Queensland, Australia, January 17-19 2007.. USA: WSEAS Press.

Link to ACQUIRE

Chowdhury, A., Khan, M., & Rasul, M. (2006). Low energy cooling technologies for sub-tropical/warm humid climate building systems. In SimBuild 2006 : Building sustainability and performance through simulation. (pp. 1-9). Cambridge, MA: IBPSA-USA.

Link to ACQUIRE

Chowdhury, A., Khan, M., & Rasul, M. (2007). Modelling and simulation of building energy consumption : a case study on an institutional building in Central Queensland, Australia. In Proceedings of 10th International Building Performance Simulation Association International Conference, Beijing, China 3-6 September 2007. (pp. 1916-1923). Beijing, China: International Building Performance Simulation Association (IBPSA).

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2007). Modelling and simulation of the effects of passive cooling technologies on energy savings for building systems in subtropical climate. In Proceedings of the 5th IASME (pp. 73). USA: The World Scientific and Engineering Academy and Society.

Link to ACQUIRE

Saotayanan, D., & Rasul, M. (2007). Modelling and simulation of thermodynamic processes of vertical shaft kiln in magnesia plant using CFD code fluent. In Proceedings of the 5th IASME (pp. 85-90). Greece: WSEAS Press.

Link to ACQUIRE

Egerton, J., Rasul, M., & Brown, R. (2007). Outboard engine emissions : modelling and simulation of underwater propeller velocity profile using the CFD code FLUENT. In Proceedings of the 16th Australiasian Fluid Mechanics Conference (AFMC), Gold Coast, Queensland, Australia, 3-7 December, 2007 (pp. 777-781). Brisbane, Qld.: School of Engineering, The University of Queensland.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2006). Passive cooling control strategies for energy efficency in a subtropical climate air conditioned building. In Proceedings of the 3rd BSME ASME International Conference on Thermal Engineering, 20th-22nd December, 2006, Dhaka, Bangladesh. (pp. 1-6). Dhaka, Bangladesh: Bangladesh Society of Mechanical Engineers.

Link to ACQUIRE

Rasul, M., & Glasgow, R. (2005). Performance improvement of an internal combustion engine. In 6th International Conference in Mechanical Engineering, (ICME2005), 28- 30 December 2005, Dhaka, Bangladesh. (pp. 1-5). Dhaka: Mechanical Engineering, BUET.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2007). Simulation of building thermal performance in an institutional building in subtropical climate. In Proceedings of 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics Suncity, South Africa, 1-4 July 2007. (pp. 1-7). South Africa: University of Pretoria, South Africa.

Link to ACQUIRE

Brown, L., Hayden, B., & Rasul, M. (2006). Simulation of fluid velocity distribution inside the condenser waterbox of a power plant. In Annals of the Assembly for International Heat Transfer Conference. (pp. 1-11). Sydney, Australia: Begel House. Retrieved from http://www.edata-center.com/

Link to ACQUIRE

Rasul, M., & Murphy, A. (2006). Solar powered intermittent absorption refrigeration unit. In Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, Australia, 10-13 December 2006. (pp. 1-6). Melbourne, Vic.: Victoria University. Retrieved from http://itee.uq.edu.au/~aupec/aupec06/htdocs/content/pdf/182.pdf

Link to ACQUIRE

Chowdhury, A., Khan, M., & Rasul, M. (2006). Towards energy efficient building assets : review on sub-tropical climate. In Proceedings of Symposium on Improving Building Systems in Hot and Humid Climates. (pp. 1-11). College Station, TX: Energy Systems Laboratory.

Link to ACQUIRE
Book chapter

Narayanan, R. (2017). Heat-driven cooling technologies. In M. G. Rasul, A. K. Azad, & S. C. Sharma (Eds.), Clean energy for sustainable development: Comparisons and contrasts of new approaches (pp. 191-212). London, UK: Elsevier. doi:10.1016/B978-0-12-805423-9.00007-7

Rahman, A., Rasul, M., Khan, M., & Sharma, S. (2016). Cement kiln process modeling to achieve energy efficiency by utilizing agricultural biomass as alternative fuels. In N. M. Hassan (Ed.), Thermofluid modeling for energy efficiency applications (pp. 197-225). Sydney: Elsevier. doi:10.1016/B978-0-12-802397-6.00009-9

Link to ACQUIRE

Azad, A., Rasul, M., Khan, M., Mondal, S., & Islam, R. (2016). Modeling and simulation of heat and mass flow by ASPEN HYSYS for petroleum refining process in field application. In N. M. Hassan (Ed.), Thermofluid modeling for energy efficiency applications (pp. 227-257). Sydney: Elsevier. doi:10.1016/B978-0-12-802397-6.00010-5

Link to ACQUIRE

Das, P., Khan, M. M. K., Saha, S. C., & Rasul, M. G. (2016). Numerical study of flow through a reducer for scale growth suppression. In M. M. K. Khan, & N. M. S. Hassan (Eds.), Thermofluid modeling for energy efficiency applications (pp. 119-148). Sydney, NSW: Elsevier. doi:10.1016/B978-0-12-802397-6.00006-3

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2016). Parametric analysis of thermal comfort and energy efficiency in building in subtropical climate. In N. M. Hassan (Ed.), Thermofluid modeling for energy efficiency applications (pp. 149-168). Sydney: Elsevier. doi:10.1016/B978-0-12-802397-6.00007-5

Link to ACQUIRE

Ahmed, S. F., Khan, M. M. K., Maung Than Oo, A., Rasul, M. G., & Hassan, N. M. S. (2016). Performance evaluation of hybrid earth pipe cooling with horizontal piping system. In M. M. K. Khan, & N. M. S. Hassan (Eds.), Thermofluid modeling for energy efficiency applications (pp. 1-30). London, UK: Elsevier. doi:10.1016/B978-0-12-802397-6.00001-4

Link to ACQUIRE

Hassan, N. M. S., Khan, M. M. K., & Rasul, M. G. (2016). Thermal efficiency modeling in a subtropical data center. In M. M. K. Khan, & N. M. S. Hassan (Eds.), Thermofluid modeling for energy efficiency applications (pp. 31-58). Sydney: Elsevier. doi:10.1016/B978-0-12-802397-6.00002-6

Link to ACQUIRE

Ahmed, S., Khan, M., Maung Than Oo, A., Rasul, M., & Hassan, N. (2015). Numerical modeling of vertical earth pipe cooling system for hot and humid subtropical climate. In I. Dincer, C. O. Colpan, O. Kizilkan, & M. A. Ezan (Eds.), Progress in clean energy, volume II : novel systems and applications (pp. 277-299). Cham, Switzerland: Springer International Publishing. doi:10.1007/978-3-319-17031-2_21

Link to ACQUIRE

Liu, G., Rasul, M., Maung Than Oo, A., & Khan, M. (2013). Economy of smart grid. In A. S. Ali (Ed.), Smart grids : opportunities, developments and trends (pp. 215-227). London: Springer. doi:10.1007/978-1-4471-5210-1

Link to ACQUIRE

Mahamud, R., Khan, M., Rasul, M., & Leinster, M. (2013). Exergy analysis and efficiency improvement of a coal fired thermal power plant in Queensland. In M. Rasul (Ed.), Thermal power plants : advanced applications (pp. 3-28). Croatia: InTech. doi:10.5772/55574

Link to ACQUIRE

Ullah, I., Rasul, M., Sohail, A., Islam, M., & Ibrar, M. (2013). Feasibility of a solar thermal power plant in Pakistan. In M. Rasul (Ed.), Thermal power plants : advanced applications (pp. 109-125). Croatia: InTech. Retrieved from http://dx.doi.org/10.5772/55488

Link to ACQUIRE

Rasul, M., Nouwens, F., Swift, R., Martin, F., & Greensill, C. (2012). Assessment of final year engineering projects : a pilot investigation on issues and best practice. In Unknown (Ed.), Developments in engineering education standards : advanced curriculumn innovations. (pp. 80-104). Hershey PA, USA: IGI Global. doi:10.4018/978-1-4666-0951-8.ch005

Link to ACQUIRE

Hassan, N., Khan, M., & Rasul, M. (2012). Bubble rise phenomena in non-newtonian crystal suspensions. In Unknown (Ed.), Advances in modeling of fluid dynamics. (pp. 15-50). Croatia: InTech. Retrieved from http://cdn.intechopen.com/

Link to ACQUIRE

Rasul, M., Nouwens, F., Martin, F., Greensill, C., Singh, D., Kestell, C., & Hadgraft, R. (2011). Guidelines for assessing and developing final year engineering projects. In S. Grainger, & C. Kestell (Eds.), Engineering education : an Australian perspective (pp. 373-390). UK: Multi-Science Publishing.

Link to ACQUIRE

Chowdhury, A., Rasul, M., & Khan, M. (2010). Application of project based study in the learning process : a case study. In K. Elleithy, T. Sobh, M. Iskander, V. Kapila, M. Karim, & A. Mahmood (Eds.), Technological developments in networking, education and automation [EIAE 09] (pp. 169-173). Netherlands: Springer. Retrieved from http://dx.doi/10.1007/978-90-481-9151-2

Link to ACQUIRE
Report

Rasul, M., Kootsookos, A., Lawson, J., Howard, P., Martin, F., Hadgraft, R., . . . Henderson, A. (2015). Assessing final year engineering projects (FYEPs) : ensuring learning and teaching standards and AQF8 outcomes : final report 2015. Australia: Office for Learning and Teaching, Department of Education and Training. Retrieved from http://www.olt.gov.au/system/files/resources/id12_2495_rasul_report_2015.pdf

Link to ACQUIRE
Book

Rasul, M. (2013). Thermal power plants : advanced applications. Croatia: InTech. Retrieved from http://dx.doi.org/0.5772/46240

Link to ACQUIRE

Rasul, M. (2012). Developments in engineering education standards: advanced curriculum innovations. Hershey PA, USA: IGI Global. doi:10.4018/978-1-4666-0951-8

Link to ACQUIRE

Begum, S., Rasul, M., Brown, R., & Thomas, P. (2011). Stormwater management: an introduction to Green Gully. New York: Nova Science Publishers.

Link to ACQUIRE
HE Term 1 - 2018
ENEG20001 - Australian Engineering Practice
Unit Coordinator
HE Term 2 - 2017
ENRP20003 - Engineering Research Project Implementation
Lecturer - ENRP20003 - HE Term 2 - 2017
ENRP20001 - Engineering Research Project Planning
Lecturer - ENRP20001 - HE Term 2 - 2017
ENEM13014 - Thermodynamics
Lecturer - ENEM13014 - HE Term 2 - 2017
HE Term 1 - 2017
ENRP20003 - Engineering Research Project Implementation
Unit Coordinator
ENRP20001 - Engineering Research Project Planning
Unit Coordinator
ENEG20001 - Australian Engineering Practice
Unit Coordinator
HE Term 2 - 2016
ENRP20003 - Engineering Research Project Implementation
Lecturer - ENRP20003 - HE Term 2 - 2016
ENRP20001 - Engineering Research Project Planning
Lecturer - ENRP20001 - HE Term 2 - 2016
ENEM13014 - Thermodynamics
Lead Lecturer - ENEM13014 - HE Term 2 - 2016
HE Term 1 - 2016
ENRP20003 - Engineering Research Project Implementation
Lead Lecturer - ENRP20003 - HE Term 1 - 2016
ENRP20001 - Engineering Research Project Planning
Lead Lecturer - ENRP20001 - HE Term 1 - 2016
ENEM14011 - Energy Conversion
Lead Lecturer - ENEM14011 - HE Term 1 - 2016
ENEG20001 - Australian Engineering Practice
Lead Lecturer - ENEG20001 - HE Term 1 - 2016
HE Term 2 - 2015
ENEM13014 - Thermodynamics
Lead Lecturer - ENEM13014 - HE Term 2 - 2015
HE Term 1 - 2015
ENEM14011 - Energy Conversion
Lead Lecturer - ENEM14011 - HE Term 1 - 2015
ENEM13012 - Maintenance Engineering
Lead Lecturer - ENEM13012 - HE Term 1 - 2015
HE Term 2 - 2014
ENPG21002 - Advanced Power Plant
Unit Coordinator
ENEM13014 - Thermodynamics
Lecturer - ENEM13014 - HE Term 2 - 2014
HE Term 1 - 2014
ENMM20015 - Auditing Maintenance Systems
Unit Coordinator
ENEM14011 - Energy Conversion
Lecturer - ENEM14011 - HE Term 1 - 2014
ENEM13012 - Maintenance Engineering
Lecturer - ENEM13012 - HE Term 1 - 2014
HE Term 2 - 2013
ENPG22002 - Bulk Materials and Waste Products
Lead Lecturer - ENPG22002 - HE Term 2 - 2013
ENEM13014 - Thermodynamics
Lecturer - ENEM13014 - HE Term 2 - 2013
HE Term 1 - 2013
ENEM14011 - Energy Conversion
Lecturer - ENEM14011 - HE Term 1 - 2013
ENEM13012 - Maintenance Engineering
Lecturer - ENEM13012 - HE Term 1 - 2013
HE Term 2 - 2012
ENPG21002 - Advanced Power Plant
Unit Coordinator
ENEM13014 - Thermodynamics
Lead Lecturer - ENEM13014 - HE Term 2 - 2012
HE Term 1 - 2012
ENEM14011 - Energy Conversion
Lead Lecturer - ENEM14011 - HE Term 1 - 2012
ENEM13012 - Maintenance Engineering
Lead Lecturer - ENEM13012 - HE Term 1 - 2012
HE Term 2 - 2011
ENEM13014 - Thermodynamics
Lead Lecturer - ENEM13014 - HE Term 2 - 2011
ENAM12005 - Thermal Energy Plant
Unit Coordinator
HE Term 1 - 2011
ENEM14011 - Energy Conversion
Unit Coordinator