Course History

Please note that the information shown below is for an obsolete version of the course. Please select the 'Next Version' button to view more relevant data

Previous Version Version Effective: 16th of March, 2020 Next Version
Version Effective: 16th of March, 2020

MEM30205 - Certificate III in Engineering - Mechanical Trade

Course Details

Course Summary

This program provides the skills and knowledge required to work as a engineering tradesperson in a number of disciplines:Mechanical (Maintenance) Diesel Fitting; Mechanical Trade (Machining);Mechanical Trade (Maintenance) Fitting and Turning;Mechanical Trade (Refrigeration and Air Conditioning).


Entry Requirements

This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.


Course Details

Course Type Qualification
Student Availability
  • Domestic
Fees For detailed information on Course Fees, visit www.cqu.edu.au/fees
Application Mode
  • Other
How to Apply Please Enquire
Study Area
  • Engineering and Built Environment
Skill Area
  • Engineering
AQF Level Level 3: Certificate III

Admission Codes

Domestic Students
Tertiary Admission Centre Codes (TAC) Codes
Not Applicable
International Students
CRICOS Codes
Not Applicable

Student Outcomes, Career Opportunities and Occupations

Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors as well as Engineering Tradesperson - Mechanical roles in other industries.

Delivery Agreement

Contract with PT Thiess for delivery in Indonesia-Balikpapan.  Third Party Services arrangement PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course: Recruitment of learners through PT Thiess employees Provision of educational or support services Delivery of training and/or assessment PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.

Course Structures

In order to complete this course, you must:

  1. Complete 12 core units
  2. Complete 18 elective units

Study Mode Definitions

  • Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
  • On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
  • Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.

*All study modes may include Vocational placement and/or work integrated learning.

Select a course structure below to view the delivery details, including the different study modes offered for each structure.

Please select a course structure from the options below:
Diesel Fitting/Mechanical - Rockhampton

This course is for apprentices only.  

  • On-campus
  • RPL/RCC/Credit
Core
MSAENV272B Participate in environmentally sustainable work practices More Information Training.gov Details
MEM17003A Assist in the provision of on the job training More Information Training.gov Details
MEM16008A Interact with computing technology More Information Training.gov Details
MEM12024A Perform computations More Information Training.gov Details
MEM14005A Plan a complete activity More Information Training.gov Details
MEM12023A Perform engineering measurements More Information Training.gov Details
MEM16006A Organise and communicate information More Information Training.gov Details
MEM15002A Apply quality systems More Information Training.gov Details
MEM14004A Plan to undertake a routine task More Information Training.gov Details
MEM15024A Apply quality procedures More Information Training.gov Details
MEM13014A Apply principles of occupational health and safety in the work environment More Information Training.gov Details
MEM16007A Work with others in a manufacturing, engineering or related environment More Information Training.gov Details
Elective
MEM18041B Maintain steering systems More Information Training.gov Details
MEM18040B Maintain suspension systems More Information Training.gov Details
MEM18047B Diagnose and maintain electronic controlling systems on mobile plant More Information Training.gov Details
MEM18032B Maintain induction/exhaust systems More Information Training.gov Details
MEM18029B Tune diesel engines More Information Training.gov Details
MEM18052B Maintain fluid power systems for mobile plant More Information Training.gov Details
MEM18043C Diagnose and rectify automatic transmissions More Information Training.gov Details
MEM18033B Perform engine bottom-end overhaul More Information Training.gov Details
MEM18042C Diagnose and rectify manual transmissions More Information Training.gov Details
MEM18044C Diagnose and rectify drive line and final drives More Information Training.gov Details
MEM18030B Diagnose and rectify low voltage electrical systems More Information Training.gov Details
MEM18035B Diagnose and rectify braking systems More Information Training.gov Details
MEM18026C Test compression ignition fuel systems More Information Training.gov Details
MEM18024B Maintain engine cooling systems More Information Training.gov Details
MEM05050B Perform routine gas metal arc welding More Information Training.gov Details
MEM05012C Perform routine manual metal arc welding More Information Training.gov Details
MEM05007C Perform manual heating and thermal cutting More Information Training.gov Details
MEM09002B Interpret technical drawing More Information Training.gov Details
MEM18055B Dismantle, replace and assemble engineering components More Information Training.gov Details
MEM18002B Use power tools/hand held operations More Information Training.gov Details
MEM18001C Use hand tools More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSAENV272B Participate in environmentally sustainable work practices
MEM17003A Assist in the provision of on the job training
MEM16008A Interact with computing technology
MEM12024A Perform computations
MEM14005A Plan a complete activity
MEM12023A Perform engineering measurements
MEM16006A Organise and communicate information
MEM15002A Apply quality systems
MEM14004A Plan to undertake a routine task
MEM15024A Apply quality procedures
MEM13014A Apply principles of occupational health and safety in the work environment
MEM16007A Work with others in a manufacturing, engineering or related environment
MEM18041B Maintain steering systems
MEM18040B Maintain suspension systems
MEM18047B Diagnose and maintain electronic controlling systems on mobile plant
MEM18032B Maintain induction/exhaust systems
MEM18029B Tune diesel engines
MEM18052B Maintain fluid power systems for mobile plant
MEM18043C Diagnose and rectify automatic transmissions
MEM18033B Perform engine bottom-end overhaul
MEM18042C Diagnose and rectify manual transmissions
MEM18044C Diagnose and rectify drive line and final drives
MEM18030B Diagnose and rectify low voltage electrical systems
MEM18035B Diagnose and rectify braking systems
MEM18026C Test compression ignition fuel systems
MEM18024B Maintain engine cooling systems
MEM05050B Perform routine gas metal arc welding
MEM05012C Perform routine manual metal arc welding
MEM05007C Perform manual heating and thermal cutting
MEM09002B Interpret technical drawing
MEM18055B Dismantle, replace and assemble engineering components
MEM18002B Use power tools/hand held operations
MEM18001C Use hand tools

Diesel Fitting/Mechanical - Mackay

This course is for apprentices only.
  • On-campus
  • RPL/RCC/Credit
Core
MSAENV272B Participate in environmentally sustainable work practices More Information Training.gov Details
MEM16008A Interact with computing technology More Information Training.gov Details
MEM12024A Perform computations More Information Training.gov Details
MEM14005A Plan a complete activity More Information Training.gov Details
MEM12023A Perform engineering measurements More Information Training.gov Details
MEM16006A Organise and communicate information More Information Training.gov Details
MEM15002A Apply quality systems More Information Training.gov Details
MEM14004A Plan to undertake a routine task More Information Training.gov Details
MEM15024A Apply quality procedures More Information Training.gov Details
MEM13014A Apply principles of occupational health and safety in the work environment More Information Training.gov Details
MEM16007A Work with others in a manufacturing, engineering or related environment More Information Training.gov Details
Elective
MEM18040B Maintain suspension systems More Information Training.gov Details
MEM18041B Maintain steering systems More Information Training.gov Details
MEM17003A Assist in the provision of on the job training More Information Training.gov Details
MEM18043C Diagnose and rectify automatic transmissions More Information Training.gov Details
MEM18042C Diagnose and rectify manual transmissions More Information Training.gov Details
MEM18044C Diagnose and rectify drive line and final drives More Information Training.gov Details
MEM18030B Diagnose and rectify low voltage electrical systems More Information Training.gov Details
MEM18035B Diagnose and rectify braking systems More Information Training.gov Details
MEM18024B Maintain engine cooling systems More Information Training.gov Details
MEM05050B Perform routine gas metal arc welding More Information Training.gov Details
MEM05012C Perform routine manual metal arc welding More Information Training.gov Details
MEM05007C Perform manual heating and thermal cutting More Information Training.gov Details
MEM09002B Interpret technical drawing More Information Training.gov Details
MEM18055B Dismantle, replace and assemble engineering components More Information Training.gov Details
MEM18002B Use power tools/hand held operations More Information Training.gov Details
MEM18001C Use hand tools More Information Training.gov Details
MEM18033B Perform engine bottom-end overhaul More Information Training.gov Details
MEM18052B Maintain fluid power systems for mobile plant More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSAENV272B Participate in environmentally sustainable work practices
MEM16008A Interact with computing technology
MEM12024A Perform computations
MEM14005A Plan a complete activity
MEM12023A Perform engineering measurements
MEM16006A Organise and communicate information
MEM15002A Apply quality systems
MEM14004A Plan to undertake a routine task
MEM15024A Apply quality procedures
MEM13014A Apply principles of occupational health and safety in the work environment
MEM16007A Work with others in a manufacturing, engineering or related environment
MEM18040B Maintain suspension systems
MEM18041B Maintain steering systems
MEM17003A Assist in the provision of on the job training
MEM18043C Diagnose and rectify automatic transmissions
MEM18042C Diagnose and rectify manual transmissions
MEM18044C Diagnose and rectify drive line and final drives
MEM18030B Diagnose and rectify low voltage electrical systems
MEM18035B Diagnose and rectify braking systems
MEM18024B Maintain engine cooling systems
MEM05050B Perform routine gas metal arc welding
MEM05012C Perform routine manual metal arc welding
MEM05007C Perform manual heating and thermal cutting
MEM09002B Interpret technical drawing
MEM18055B Dismantle, replace and assemble engineering components
MEM18002B Use power tools/hand held operations
MEM18001C Use hand tools
MEM18033B Perform engine bottom-end overhaul
MEM18052B Maintain fluid power systems for mobile plant

Fitting and Turning - Gladstone

This course is for apprentices only and is usually completed over four years.  

  • On-campus
  • RPL/RCC/Credit
Core
MSAENV272B Participate in environmentally sustainable work practices More Information Training.gov Details
MEM17003A Assist in the provision of on the job training More Information Training.gov Details
MEM16008A Interact with computing technology More Information Training.gov Details
MEM16007A Work with others in a manufacturing, engineering or related environment More Information Training.gov Details
MEM16006A Organise and communicate information More Information Training.gov Details
MEM15024A Apply quality procedures More Information Training.gov Details
MEM15002A Apply quality systems More Information Training.gov Details
MEM14005A Plan a complete activity More Information Training.gov Details
MEM14004A Plan to undertake a routine task More Information Training.gov Details
MEM13014A Apply principles of occupational health and safety in the work environment More Information Training.gov Details
MEM12024A Perform computations More Information Training.gov Details
MEM12023A Perform engineering measurements More Information Training.gov Details
Elective
MEM05050B Perform routine gas metal arc welding More Information Training.gov Details
MEM05012C Perform routine manual metal arc welding More Information Training.gov Details
MEM05007C Perform manual heating and thermal cutting More Information Training.gov Details
MEM18055B Dismantle, replace and assemble engineering components More Information Training.gov Details
MEM18021B Maintain hydraulic systems More Information Training.gov Details
MEM18020B Maintain hydraulic system components More Information Training.gov Details
MEM18019B Maintain pneumatic systems More Information Training.gov Details
MEM18018C Maintain pneumatic system components More Information Training.gov Details
MEM18013B Perform gland packing More Information Training.gov Details
MEM18012B Perform installation and removal of mechanical seals More Information Training.gov Details
MEM18009B Perform levelling and alignment of machines and engineering components More Information Training.gov Details
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies More Information Training.gov Details
MEM18006C Repair & fit engineering components More Information Training.gov Details
MEM18005B Perform fault diagnosis, installation & removal of bearings More Information Training.gov Details
MEM18004B Maintain and overhaul mechanical equipment More Information Training.gov Details
MEM18003C Use tools for precision work More Information Training.gov Details
MEM18002B Use power tools/hand held operations More Information Training.gov Details
MEM18001C Use hand tools More Information Training.gov Details
MEM12006C Mark off/out (general engineering) More Information Training.gov Details
MEM12003B Perform precision mechanical measurement More Information Training.gov Details
MEM11011B Undertake manual handling More Information Training.gov Details
MEM09002B Interpret technical drawing More Information Training.gov Details
MEM07007C Perform milling operations More Information Training.gov Details
MEM07006C Perform lathe operations More Information Training.gov Details
MEM07005C Perform general machining More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSAENV272B Participate in environmentally sustainable work practices
MEM17003A Assist in the provision of on the job training
MEM16008A Interact with computing technology
MEM16007A Work with others in a manufacturing, engineering or related environment
MEM16006A Organise and communicate information
MEM15024A Apply quality procedures
MEM15002A Apply quality systems
MEM14005A Plan a complete activity
MEM14004A Plan to undertake a routine task
MEM13014A Apply principles of occupational health and safety in the work environment
MEM12024A Perform computations
MEM12023A Perform engineering measurements
MEM05050B Perform routine gas metal arc welding
MEM05012C Perform routine manual metal arc welding
MEM05007C Perform manual heating and thermal cutting
MEM18055B Dismantle, replace and assemble engineering components
MEM18021B Maintain hydraulic systems
MEM18020B Maintain hydraulic system components
MEM18019B Maintain pneumatic systems
MEM18018C Maintain pneumatic system components
MEM18013B Perform gland packing
MEM18012B Perform installation and removal of mechanical seals
MEM18009B Perform levelling and alignment of machines and engineering components
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies
MEM18006C Repair & fit engineering components
MEM18005B Perform fault diagnosis, installation & removal of bearings
MEM18004B Maintain and overhaul mechanical equipment
MEM18003C Use tools for precision work
MEM18002B Use power tools/hand held operations
MEM18001C Use hand tools
MEM12006C Mark off/out (general engineering)
MEM12003B Perform precision mechanical measurement
MEM11011B Undertake manual handling
MEM09002B Interpret technical drawing
MEM07007C Perform milling operations
MEM07006C Perform lathe operations
MEM07005C Perform general machining

Fitting and Turning - Mackay

This course is for apprentices only and is usually completed over four years.
  • On-campus
  • RPL/RCC/Credit
Core
MSAENV272B Participate in environmentally sustainable work practices More Information Training.gov Details
MEM17003A Assist in the provision of on the job training More Information Training.gov Details
MEM16008A Interact with computing technology More Information Training.gov Details
MEM16007A Work with others in a manufacturing, engineering or related environment More Information Training.gov Details
MEM16006A Organise and communicate information More Information Training.gov Details
MEM15024A Apply quality procedures More Information Training.gov Details
MEM15002A Apply quality systems More Information Training.gov Details
MEM14005A Plan a complete activity More Information Training.gov Details
MEM14004A Plan to undertake a routine task More Information Training.gov Details
MEM13014A Apply principles of occupational health and safety in the work environment More Information Training.gov Details
MEM12024A Perform computations More Information Training.gov Details
MEM12023A Perform engineering measurements More Information Training.gov Details
Elective
MEM18011C Shut down and isolate machines/equipment More Information Training.gov Details
MEM18055B Dismantle, replace and assemble engineering components More Information Training.gov Details
MEM18021B Maintain hydraulic systems More Information Training.gov Details
MEM18020B Maintain hydraulic system components More Information Training.gov Details
MEM18019B Maintain pneumatic systems More Information Training.gov Details
MEM18018C Maintain pneumatic system components More Information Training.gov Details
MEM18013B Perform gland packing More Information Training.gov Details
MEM18012B Perform installation and removal of mechanical seals More Information Training.gov Details
MEM18009B Perform levelling and alignment of machines and engineering components More Information Training.gov Details
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies More Information Training.gov Details
MEM18006C Repair & fit engineering components More Information Training.gov Details
MEM18005B Perform fault diagnosis, installation & removal of bearings More Information Training.gov Details
MEM18004B Maintain and overhaul mechanical equipment More Information Training.gov Details
MEM18003C Use tools for precision work More Information Training.gov Details
MEM18002B Use power tools/hand held operations More Information Training.gov Details
MEM18001C Use hand tools More Information Training.gov Details
MEM12006C Mark off/out (general engineering) More Information Training.gov Details
MEM12003B Perform precision mechanical measurement More Information Training.gov Details
MEM09002B Interpret technical drawing More Information Training.gov Details
MEM07028B Operate computer controlled machines/processes More Information Training.gov Details
MEM07024B Operate and monitor machine/process More Information Training.gov Details
MEM07021B Perform complex lathe operations More Information Training.gov Details
MEM07018C Write basic NC/CNC programs More Information Training.gov Details
MEM07016C Set and edit computer controlled machines/processes More Information Training.gov Details
MEM07015B Set computer controlled machines/processes More Information Training.gov Details
MEM07013B Perform machining operations using horizontal and/or vertical boring machine More Information Training.gov Details
MEM07007C Perform milling operations More Information Training.gov Details
MEM07006C Perform lathe operations More Information Training.gov Details
MEM07005C Perform general machining More Information Training.gov Details
MEM05050B Perform routine gas metal arc welding More Information Training.gov Details
MEM05012C Perform routine manual metal arc welding More Information Training.gov Details
MEM05007C Perform manual heating and thermal cutting More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSAENV272B Participate in environmentally sustainable work practices
MEM17003A Assist in the provision of on the job training
MEM16008A Interact with computing technology
MEM16007A Work with others in a manufacturing, engineering or related environment
MEM16006A Organise and communicate information
MEM15024A Apply quality procedures
MEM15002A Apply quality systems
MEM14005A Plan a complete activity
MEM14004A Plan to undertake a routine task
MEM13014A Apply principles of occupational health and safety in the work environment
MEM12024A Perform computations
MEM12023A Perform engineering measurements
MEM18011C Shut down and isolate machines/equipment
MEM18055B Dismantle, replace and assemble engineering components
MEM18021B Maintain hydraulic systems
MEM18020B Maintain hydraulic system components
MEM18019B Maintain pneumatic systems
MEM18018C Maintain pneumatic system components
MEM18013B Perform gland packing
MEM18012B Perform installation and removal of mechanical seals
MEM18009B Perform levelling and alignment of machines and engineering components
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies
MEM18006C Repair & fit engineering components
MEM18005B Perform fault diagnosis, installation & removal of bearings
MEM18004B Maintain and overhaul mechanical equipment
MEM18003C Use tools for precision work
MEM18002B Use power tools/hand held operations
MEM18001C Use hand tools
MEM12006C Mark off/out (general engineering)
MEM12003B Perform precision mechanical measurement
MEM09002B Interpret technical drawing
MEM07028B Operate computer controlled machines/processes
MEM07024B Operate and monitor machine/process
MEM07021B Perform complex lathe operations
MEM07018C Write basic NC/CNC programs
MEM07016C Set and edit computer controlled machines/processes
MEM07015B Set computer controlled machines/processes
MEM07013B Perform machining operations using horizontal and/or vertical boring machine
MEM07007C Perform milling operations
MEM07006C Perform lathe operations
MEM07005C Perform general machining
MEM05050B Perform routine gas metal arc welding
MEM05012C Perform routine manual metal arc welding
MEM05007C Perform manual heating and thermal cutting

Fitting and Turning - Rockhampton

This course is for apprentices only and is usually completed over four years.
  • On-campus
  • RPL/RCC/Credit
Core
MSAENV272B Participate in environmentally sustainable work practices More Information Training.gov Details
MEM17003A Assist in the provision of on the job training More Information Training.gov Details
MEM16008A Interact with computing technology More Information Training.gov Details
MEM16007A Work with others in a manufacturing, engineering or related environment More Information Training.gov Details
MEM16006A Organise and communicate information More Information Training.gov Details
MEM15024A Apply quality procedures More Information Training.gov Details
MEM15002A Apply quality systems More Information Training.gov Details
MEM14005A Plan a complete activity More Information Training.gov Details
MEM14004A Plan to undertake a routine task More Information Training.gov Details
MEM13014A Apply principles of occupational health and safety in the work environment More Information Training.gov Details
MEM12024A Perform computations More Information Training.gov Details
MEM12023A Perform engineering measurements More Information Training.gov Details
Elective
MEM12001B Use comparison and basic measuring devices More Information Training.gov Details
MEM05012C Perform routine manual metal arc welding More Information Training.gov Details
MEM05007C Perform manual heating and thermal cutting More Information Training.gov Details
MEM18055B Dismantle, replace and assemble engineering components More Information Training.gov Details
MEM18020B Maintain hydraulic system components More Information Training.gov Details
MEM18018C Maintain pneumatic system components More Information Training.gov Details
MEM18009B Perform levelling and alignment of machines and engineering components More Information Training.gov Details
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies More Information Training.gov Details
MEM18006C Repair & fit engineering components More Information Training.gov Details
MEM18005B Perform fault diagnosis, installation & removal of bearings More Information Training.gov Details
MEM18004B Maintain and overhaul mechanical equipment More Information Training.gov Details
MEM18003C Use tools for precision work More Information Training.gov Details
MEM18002B Use power tools/hand held operations More Information Training.gov Details
MEM18001C Use hand tools More Information Training.gov Details
MEM12006C Mark off/out (general engineering) More Information Training.gov Details
MEM12003B Perform precision mechanical measurement More Information Training.gov Details
MEM09002B Interpret technical drawing More Information Training.gov Details
MEM07028B Operate computer controlled machines/processes More Information Training.gov Details
MEM07024B Operate and monitor machine/process More Information Training.gov Details
MEM07018C Write basic NC/CNC programs More Information Training.gov Details
MEM07016C Set and edit computer controlled machines/processes More Information Training.gov Details
MEM07015B Set computer controlled machines/processes More Information Training.gov Details
MEM07007C Perform milling operations More Information Training.gov Details
MEM07006C Perform lathe operations More Information Training.gov Details
MEM07005C Perform general machining More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSAENV272B Participate in environmentally sustainable work practices
MEM17003A Assist in the provision of on the job training
MEM16008A Interact with computing technology
MEM16007A Work with others in a manufacturing, engineering or related environment
MEM16006A Organise and communicate information
MEM15024A Apply quality procedures
MEM15002A Apply quality systems
MEM14005A Plan a complete activity
MEM14004A Plan to undertake a routine task
MEM13014A Apply principles of occupational health and safety in the work environment
MEM12024A Perform computations
MEM12023A Perform engineering measurements
MEM12001B Use comparison and basic measuring devices
MEM05012C Perform routine manual metal arc welding
MEM05007C Perform manual heating and thermal cutting
MEM18055B Dismantle, replace and assemble engineering components
MEM18020B Maintain hydraulic system components
MEM18018C Maintain pneumatic system components
MEM18009B Perform levelling and alignment of machines and engineering components
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies
MEM18006C Repair & fit engineering components
MEM18005B Perform fault diagnosis, installation & removal of bearings
MEM18004B Maintain and overhaul mechanical equipment
MEM18003C Use tools for precision work
MEM18002B Use power tools/hand held operations
MEM18001C Use hand tools
MEM12006C Mark off/out (general engineering)
MEM12003B Perform precision mechanical measurement
MEM09002B Interpret technical drawing
MEM07028B Operate computer controlled machines/processes
MEM07024B Operate and monitor machine/process
MEM07018C Write basic NC/CNC programs
MEM07016C Set and edit computer controlled machines/processes
MEM07015B Set computer controlled machines/processes
MEM07007C Perform milling operations
MEM07006C Perform lathe operations
MEM07005C Perform general machining

Course Assessment Information

RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Assessment Types
Third Party Verification
Written/Electronic Assessment
Practical Task
RPL
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.

Domestic 2018 Availabilities

Diesel Fitting/Mechanical - Rockhampton

There are currently no intakes scheduled for this course structure.

Diesel Fitting/Mechanical - Mackay

There are currently no intakes scheduled for this course structure.

Fitting and Turning - Gladstone

On-campus

Gladstone City

December: Full Time

Fitting and Turning - Mackay

There are currently no intakes scheduled for this course structure.

Fitting and Turning - Rockhampton

There are currently no intakes scheduled for this course structure.

Domestic 2019 Availabilities

Diesel Fitting/Mechanical - Rockhampton

There are currently no intakes scheduled for this course structure.

Diesel Fitting/Mechanical - Mackay

There are currently no intakes scheduled for this course structure.

Fitting and Turning - Gladstone

On-campus

Gladstone City

October: Part Time

Fitting and Turning - Mackay

There are currently no intakes scheduled for this course structure.

Fitting and Turning - Rockhampton

There are currently no intakes scheduled for this course structure.
For individual class days and times for each intake please check the TAFE Timetable located here
The availabilities shown above are for the current and future years. To view any historic availabilities please press "Show Historic Availabilities" below:

Show Historic Availabilities
More Details

More Details

Third Party Services arrangement

PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course:

  • Recruitment of learners through PT Thiess employees 
  • Provision of educational or support services
  • Delivery of training and/or assessment

PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.