To complete this course, you must pass all units in the Core Structure and one Major. The More Details tab has a link to the Course Planners Site which list all units for this course. Note that full-time students generally enrol in 24cp per term and part-time students generally enrol in a half-load of 12cp per term.

Course planners for the Civil, Electrical and Mechanical Majors include the MATH11247 Foundation Mathematics unit. You may opt-out of this unit and complete an additional elective instead if you completed the Mathematics Self-Diagnostics Test and achieved satisfactory results. See the More Details tab for how to access the Mathematics Self-Diagnostic Test and for more information on alternate pathways for completing the first-year mathematics units.

Professional Engineering Practice

You must complete the following Diploma of Professional Practice (Co-op Engineering) units during your course. This Diploma consists of three compulsory units, two compulsory 24-week work placements and one Leadership Elective.

If you are intending to go on placement at the end of your second year of study, you should enrol in ENEP11007 Engineering Employment Preparation in Year 2 Term 2. As ENEP11007 is prerequisite to ENEP11006 Industry Practice 1, you will not be able to go on placement if you have not completed ENEP11007. The More Details tab includes a link to the Course Planners Site for this course.

If you are taking a specialisation major (Civil and Humanitarian, Electrical and Data Analytics, or Electrical and Information Processing) you are required to take ENEP12008 Engineering Leadership unit as your Leadership Elective. 

Intermediate units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms. 

Advanced Units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Elective Units

If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

Note that you are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEM14014 and ENEM14015 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double cred-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Intermediate Units

Note that you are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms.

Advanced Units

Please note that the Resource Systems Automation Project and Resource Systems Feasibility Project are double credit-point (12cp) units intended to provide an authentic project experience.

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.